gvpr(1)
NAME
gvpr - graph pattern scanning and processing language
SYNOPSIS
gvpr [-icnqV?] [ -o outfile ] [ -a args ] [ 'prog' | -f progfile ] [ files ]
DESCRIPTION
gvpr (previously known as gpr) is a graph stream editor inspired by awk. It copies input graphs to its output, possibly transforming their structure and attributes, creating new graphs, or printing arbitrary information. The graph model is that provided by libcgraph(3). In particular, gvpr reads and writes graphs using the dot language. Basically, gvpr traverses each input graph, denoted by $G, visiting each node and edge, matching it with the predicateaction rules supplied in the input program. The rules are evaluated in order. For each predicate evaluating to true, the corresponding action is performed. During the traversal, the current node or edge being visited is denoted by $. For each input graph, there is a target subgraph, denoted by $T, initially empty and used to accumulate chosen entities, and an output graph, $O, used for final processing and then written to output. By default, the output graph is the target graph. The output graph can be set in the program or, in a limited sense, on the command line.
OPTIONS
The following options are supported:
-a args
The string args is split into whitespaceseparated tokens, with
the individual tokens available as strings in the gvpr program
as ARGV[0],...,ARGV[ARGC-1]. Whitespace characters within
single or double quoted substrings, or preceded by a backslash,
are ignored as separators. In general, a backslash character
turns off any special meaning of the following character. Note
that the tokens derived from multiple -a flags are concatenated.
-c Use the source graph as the output graph.
-i Derive the nodeinduced subgraph extension of the output graph
in the context of its root graph.
-o outfile
Causes the output stream to be written to the specified file; by
default, output is written to stdout.
-f progfile
Use the contents of the specified file as the program to execute
on the input. If progfile contains a slash character, the name
is taken as the pathname of the file. Otherwise, gvpr will use
the directories specified in the environment variable GVPRPATH
to look for the file. If -f is not given, gvpr will use the
first nonoption argument as the program.
-q Turns off warning messages.
-n Turns off graph read-ahead. By default, the variable $NG is set
to the next graph to be processed. This requires a read of the
next graph before processing the current graph, which may block
if the next graph is only generated in response to some action
pertaining to the processing of the current graph.
-V Causes the program to print version information and exit.
-? Causes the program to print usage information and exit.
OPERANDS
The following operand is supported:
files Names of files containing 1 or more graphs in the dot language.
If no -f option is given, the first name is removed from the
list and used as the input program. If the list of files is
empty, stdin will be used.
PROGRAMS
A gvpr program consists of a list of predicateaction clauses, having
one of the forms:
BEGIN { action }
BEG_G { action }
N [ predicate ] { action }
E [ predicate ] { action }
END_G { action }
END { action }
A program can contain at most one of each of the BEGIN, END_G and END
clauses. There can be any number of BEG_G, N and E statements, the
first applied to graphs, the second to nodes, the third to edges.
These are separated into blocks, a block consisting of an optional
BEG_G statement and all N and E statements up to the next BEG_G
statement, if any. The toplevel semantics of a gvpr program are:
Evaluate the BEGIN clause, if any.
For each input graph G {
For each block {
Set G as the current graph and current object.
Evaluate the BEG_G clause, if any.
For each node and edge in G {
Set the node or edge as the current object.
Evaluate the N or E clauses, as appropriate.
}
}
Set G as the current object.
Evaluate the END_G clause, if any.
}
Evaluate the END clause, if any.
The actions of the BEGIN, BEG_G, END_G and END clauses are performed
when the clauses are evaluated. For N or E clauses, either the
predicate or action may be omitted. If there is no predicate with an
action, the action is performed on every node or edge, as appropriate.
If there is no action and the predicate evaluates to true, the
associated node or edge is added to the target graph.
The blocks are evaluated in the order in which they occur. Within a
block, the N clauses (E clauses, respectively) are evaluated in the
order in which the occur. Note, though, that within a block, N or E
clauses may be interlaced, depending on the traversal order.
Predicates and actions are sequences of statements in the C dialect
supported by the expr(3) library. The only difference between
predicates and actions is that the former must have a type that may
interpreted as either true or false. Here the usual C convention is
followed, in which a nonzero value is considered true. This would
include nonempty strings and nonempty references to nodes, edges,
etc. However, if a string can be converted to an integer, this value is
used.
In addition to the usual C base types (void, int, char, float, long,
unsigned and double), gvpr provides string as a synonym for char*, and
the graphbased types node_t, edge_t, graph_t and obj_t. The obj_t
type can be viewed as a supertype of the other 3 concrete types; the
correct base type is maintained dynamically. Besides these base types,
the only other supported type expressions are (associative) arrays.
Constants follow C syntax, but strings may be quoted with either "..."
or '...'. gvpr accepts C++ comments as well as cpptype comments. For
the latter, if a line begins with a '#' character, the rest of the line
is ignored.
A statement can be a declaration of a function, a variable or an array,
or an executable statement. For declarations, there is a single scope.
Array declarations have the form:
type array [ type0 ]
where type0 is optional. If it is supplied, the parser will enforce
that all array subscripts have the specified type. If it is not
supplied, objects of all types can be used as subscripts. As in C,
variables and arrays must be declared. In particular, an undeclared
variable will be interpreted as the name of an attribute of a node,
edge or graph, depending on the context.
Executable statements can be one of the following:
{ [ statement ... ] }
expression // commonly var = expression
if( expression ) statement [ else statement ]
for( expression ; expression ; expression ) statement
for( array [ var ]) statement
forr( array [ var ]) statement
while( expression ) statement
switch( expression ) case statements
break [ expression ]
continue [ expression ]
return [ expression ]
Items in brackets are optional.
In the second form of the for statement and the forr statement, the
variable var is set to each value used as an index in the specified
array and then the associated statement is evaluated. For numeric and
string indices, the indices are returned in increasing (decreasing)
numeric or lexicographic order for for (forr, respectively). This can
be used for sorting.
Function definitions can only appear in the BEGIN clause.
Expressions include the usual C expressions. String comparisons using
== and != treat the right hand operand as a pattern for the purpose of
regular expression matching. Patterns use ksh(1) file match pattern
syntax. (For simple string equality, use the strcmp function.
gvpr will attempt to use an expression as a string or numeric value as
appropriate. Both C-like casts and function templates will cause
conversions to be performed, if possible.
Expressions of graphical type (i.e., graph_t, node_t, edge_t, obj_t)
may be followed by a field reference in the form of .name. The
resulting value is the value of the attribute named name of the given
object. In addition, in certain contexts an undeclared, unmodified
identifier is taken to be an attribute name. Specifically, such
identifiers denote attributes of the current node or edge,
respectively, in N and E clauses, and the current graph in BEG_G and
END_G clauses.
As usual in the libcgraph(3) model, attributes are stringvalued. In
addition, gvpr supports certain pseudoattributes of graph objects, not
necessarily stringvalued. These reflect intrinsic properties of the
graph objects and cannot be set by the user.
head : node_t
the head of an edge.
tail : node_t
the tail of an edge.
name : string
the name of an edge, node or graph. The name of an edge has the
form "<tailname><edgeop><headname>[<key>]", where <edgeop>
is "->" or "--" depending on whether the graph is directed or
not. The bracket part [<key>] only appears if the edge has a
nontrivial key.
indegree : int
the indegree of a node.
outdegree : int
the outdegree of a node.
degree : int
the degree of a node.
root : graph_t
the root graph of an object. The root of a root graph is itself.
parent : graph_t
the parent graph of a subgraph. The parent of a root graph is
NULL
n_edges : int
the number of edges in the graph
n_nodes : int
the number of nodes in the graph
directed : int
true (nonzero) if the graph is directed
strict : int
true (nonzero) if the graph is strict
BUILTIN FUNCTIONS
The following functions are built into gvpr. Those functions returning
references to graph objects return NULL in case of failure.
Graphs and subgraph
graph(s : string, t : string) : graph_t
creates a graph whose name is s and whose type is specified by
the string t. Ignoring case, the characters U, D, S, N have the
interpretation undirected, directed, strict, and nonstrict,
respectively. If t is empty, a directed, nonstrict graph is
generated.
subg(g : graph_t, s : string) : graph_t
creates a subgraph in graph g with name s. If the subgraph
already exists, it is returned.
isSubg(g : graph_t, s : string) : graph_t
returns the subgraph in graph g with name s, if it exists, or
NULL otherwise.
fstsubg(g : graph_t) : graph_t
returns the first subgraph in graph g, or NULL if none exists.
nxtsubg(sg : graph_t) : graph_t
returns the next subgraph after sg, or NULL.
isDirect(g : graph_t) : int
returns true if and only if g is directed.
isStrict(g : graph_t) : int
returns true if and only if g is strict.
nNodes(g : graph_t) : int
returns the number of nodes in g.
nEdges(g : graph_t) : int
returns the number of edges in g.
Nodes
node(sg : graph_t, s : string) : node_t
creates a node in graph g of name s. If such a node already
exists, it is returned.
subnode(sg : graph_t, n : node_t) : node_t
inserts the node n into the subgraph g. Returns the node.
fstnode(g : graph_t) : node_t
returns the first node in graph g, or NULL if none exists.
nxtnode(n : node_t) : node_t
returns the next node after n in the root graph, or NULL.
nxtnode_sg(sg : graph_t, n : node_t) : node_t
returns the next node after n in sg, or NULL.
isNode(sg : graph_t, s : string) : node_t
looks for a node in (sub)graph sg of name s. If such a node
exists, it is returned. Otherwise, NULL is returned.
isSubnode(sg : graph_t, n : node_t) : int
returns non-zero if node n is in (sub)graph sg, or zero
otherwise.
indegreeOf(sg : graph_t, n : node_t) : int
returns the indegree of node n in (sub)graph sg.
outdegreeOf(sg : graph_t, n : node_t) : int
returns the outdegree of node n in (sub)graph sg.
degreeOf(sg : graph_t, n : node_t) : int
returns the degree of node n in (sub)graph sg.
Edges
edge(t : node_t, h : node_t, s : string) : edge_t
creates an edge with tail node t, head node h and name s in the
root graph. If the graph is undirected, the distinction between
head and tail nodes is unimportant. If such an edge already
exists, it is returned.
edge_sg(sg : graph_t, t : node_t, h : node_t, s : string) : edge_t
creates an edge with tail node t, head node h and name s in
(sub)graph sg (and all parent graphs). If the graph is
undirected, the distinction between head and tail nodes is
unimportant. If such an edge already exists, it is returned.
subedge(g : graph_t, e : edge_t) : edge_t
inserts the edge e into the subgraph g. Returns the edge.
isEdge(t : node_t, h : node_t, s : string) : edge_t
looks for an edge with tail node t, head node h and name s. If
the graph is undirected, the distinction between head and tail
nodes is unimportant. If such an edge exists, it is returned.
Otherwise, NULL is returned.
isEdge_sg(sg : graph_t, t : node_t, h : node_t, s : string) : edge_t
looks for an edge with tail node t, head node h and name s in
(sub)graph sg. If the graph is undirected, the distinction
between head and tail nodes is unimportant. If such an edge
exists, it is returned. Otherwise, NULL is returned.
isSubedge(g : graph_t, e : edge_t) : int
returns non-zero if edge e is in (sub)graph sg, or zero
otherwise.
fstout(n : node_t) : edge_t
returns the first outedge of node n in the root graph.
fstout_sg(sg : graph_t, n : node_t) : edge_t
returns the first outedge of node n in (sub)graph sg.
nxtout(e : edge_t) : edge_t
returns the next outedge after e in the root graph.
nxtout_sg(sg : graph_t, e : edge_t) : edge_t
returns the next outedge after e in graph sg.
fstin(n : node_t) : edge_t
returns the first inedge of node n in the root graph.
fstin_sg(sg : graph_t, n : node_t) : edge_t
returns the first inedge of node n in graph sg.
nxtin(e : edge_t) : edge_t
returns the next inedge after e in the root graph.
nxtin_sg(sg : graph_t, e : edge_t) : edge_t
returns the next inedge after e in graph sg.
fstedge(n : node_t) : edge_t
returns the first edge of node n in the root graph.
fstedge_sg(sg : graph_t, n : node_t) : edge_t
returns the first edge of node n in graph sg.
nxtedge(e : edge_t, node_t) : edge_t
returns the next edge after e in the root graph.
nxtedge_sg(sg : graph_t, e : edge_t, node_t) : edge_t
returns the next edge after e in the graph sg.
opp(e : edge_t, node_t) : node_t
returns the node on the edge e not equal to n. Returns NULL if
n is not a node of e. This can be useful when using fstedge and
nxtedge to enumerate the neighbors of n.
Graph I/O
write(g : graph_t) : void
prints g in dot format onto the output stream.
writeG(g : graph_t, fname : string) : void
prints g in dot format into the file fname.
fwriteG(g : graph_t, fd : int) : void
prints g in dot format onto the open stream denoted by the
integer fd.
readG(fname : string) : graph_t
returns a graph read from the file fname. The graph should be in
dot format. If no graph can be read, NULL is returned.
freadG(fd : int) : graph_t
returns the next graph read from the open stream fd. Returns
NULL at end of file.
Graph miscellany
delete(g : graph_t, x : obj_t) : void
deletes object x from graph g. If g is NULL, the function uses
the root graph of x. If x is a graph or subgraph, it is closed
unless x is locked.
isIn(g : graph_t, x : obj_t) : int
returns true if x is in subgraph g.
cloneG(g : graph_t, s : string) : graph_t
creates a clone of graph g with name of s. If s is "", the
created graph has the same name as g.
clone(g : graph_t, x : obj_t) : obj_t
creates a clone of object x in graph g. In particular, the new
object has the same name/value attributes and structure as the
original object. If an object with the same key as x already
exists, its attributes are overlaid by those of x and the object
is returned. If an edge is cloned, both endpoints are
implicitly cloned. If a graph is cloned, all nodes, edges and
subgraphs are implicitly cloned. If x is a graph, g may be
NULL, in which case the cloned object will be a new root graph.
In this case, the call is equivalent to cloneG(x,"").
copy(g : graph_t, x : obj_t) : obj_t
creates a copy of object x in graph g, where the new object has
the same name/value attributes as the original object. If an
object with the same key as x already exists, its attributes are
overlaid by those of x and the object is returned. Note that
this is a shallow copy. If x is a graph, none of its nodes,
edges or subgraphs are copied into the new graph. If x is an
edge, the endpoints are created if necessary, but they are not
cloned. If x is a graph, g may be NULL, in which case the
cloned object will be a new root graph.
copyA(src : obj_t, tgt : obj_t) : int
copies the attributes of object src to object tgt, overwriting
any attribute values tgt may initially have.
induce(g : graph_t) : void
extends g to its nodeinduced subgraph extension in its root
graph.
hasAttr(src : obj_t, name : string) : int
returns non-zero if object src has an attribute whose name is
name. It returns 0 otherwise.
isAttr(g : graph_t, kind : string, name : string) : int
returns non-zero if an attribute name has been defined in g for
objects of the given kind. For nodes, edges, and graphs, kind
should be "N", "E", and "G", respectively. It returns 0
otherwise.
aget(src : obj_t, name : string) : string
returns the value of attribute name in object src. This is
useful for those cases when name conflicts with one of the
keywords such as "head" or "root". If the attribute has not
been declared in the graph, the function will initialize it with
a default value of "". To avoid this, one should use the hasAttr
or isAttr function to check that the attribute exists.
aset(src : obj_t, name : string, value : string) : int
sets the value of attribute name in object src to value.
Returns 0 on success, nonzero on failure. See aget above.
getDflt(g : graph_t, kind : string, name : string) : string
returns the default value of attribute name in objects in g of
the given kind. For nodes, edges, and graphs, kind should be
"N", "E", and "G", respectively. If the attribute has not been
declared in the graph, the function will initialize it with a
default value of "". To avoid this, one should use the isAttr
function to check that the attribute exists.
setDflt(g : graph_t, kind : string, name : string, value : string) :
int
sets the default value of attribute name to value in objects in
g of the given kind. For nodes, edges, and graphs, kind should
be "N", "E", and "G", respectively. Returns 0 on success, non
zero on failure. See getDflt above.
fstAttr(g : graph_t, kind : string) : string
returns the name of the first attribute of objects in g of the
given kind. For nodes, edges, and graphs, kind should be "N",
"E", and "G", respectively. If there are no attributes, the
string "" is returned.
nxtAttr(g : graph_t, kind : string, name : string) : string
returns the name of the next attribute of objects in g of the
given kind after the attribute name. The argument name must be
the name of an existing attribute; it will typically be the
return value of an previous call to fstAttr or nxtAttr. For
nodes, edges, and graphs, kind should be "N", "E", and "G",
respectively. If there are no attributes left, the string "" is
returned.
compOf(g : graph_t, n : node_t) : graph_t
returns the connected component of the graph g containing node
n, as a subgraph of g. The subgraph only contains the nodes. One
can use induce to add the edges. The function fails and returns
NULL if n is not in g. Connectivity is based on the underlying
undirected graph of g.
kindOf(obj : obj_t) : string
returns an indication of the type of obj. For nodes, edges, and
graphs, it returns "N", "E", and "G", respectively.
lock(g : graph_t, v : int) : int
implements graph locking on root graphs. If the integer v is
positive, the graph is set so that future calls to delete have
no immediate effect. If v is zero, the graph is unlocked. If
there has been a call to delete the graph while it was locked,
the graph is closed. If v is negative, nothing is done. In all
cases, the previous lock value is returned.
Strings
sprintf(fmt : string, ...) : string
returns the string resulting from formatting the values of the
expressions occurring after fmt according to the printf(3)
format fmt
gsub(str : string, pat : string) : string
gsub(str : string, pat : string, repl : string) : string
returns str with all substrings matching pat deleted or replaced
by repl, respectively.
sub(str : string, pat : string) : string
sub(str : string, pat : string, repl : string) : string
returns str with the leftmost substring matching pat deleted or
replaced by repl, respectively. The characters '^' and '$' may
be used at the beginning and end, respectively, of pat to anchor
the pattern to the beginning or end of str.
substr(str : string, idx : int) : string
substr(str : string, idx : int, len : int) : string
returns the substring of str starting at position idx to the end
of the string or of length len, respectively. Indexing starts
at 0. If idx is negative or idx is greater than the length of
str, a fatal error occurs. Similarly, in the second case, if len
is negative or idx + len is greater than the length of str, a
fatal error occurs.
strcmp(s1 : string, s2 : string) : int
provides the standard C function strcmp(3).
length(s : string) : int
returns the length of string s.
index(s : string, t : string) : int
rindex(s : string, t : string) : int
returns the index of the character in string s where the
leftmost (rightmost) copy of string t can be found, or -1 if t
is not a substring of s.
match(s : string, p : string) : int
returns the index of the character in string s where the
leftmost match of pattern p can be found, or -1 if no substring
of s matches p.
toupper(s : string) : string
returns a version of s with the alphabetic characters converted
to upper-case.
tolower(s : string) : string
returns a version of s with the alphabetic characters converted
to lower-case.
canon(s : string) : string
returns a version of s appropriate to be used as an identifier
in a dot file.
html(g : graph_t, s : string) : string
returns a ``magic'' version of s as an HTML string. This will
typically be used to attach an HTML-like label to a graph
object. Note that the returned string lives in g. In particular,
it will be freed when g is closed, and to act as an HTML string,
it has to be used with an object of g. In addition, note that
the angle bracket quotes should not be part of s. These will be
added if g is written in concrete DOT format.
ishtml(s : string) : int
returns non-zero if and only if s is an HTML string.
xOf(s : string) : string
returns the string "x" if s has the form "x,y", where both x and
y are numeric.
yOf(s : string) : string
returns the string "y" if s has the form "x,y", where both x and
y are numeric.
llOf(s : string) : string
returns the string "llx,lly" if s has the form
"llx,lly,urx,ury", where all of llx, lly, urx, and ury are
numeric.
urOf(s)
urOf(s : string) : string returns the string "urx,ury" if s has
the form "llx,lly,urx,ury", where all of llx, lly, urx, and ury
are numeric.
sscanf(s : string, fmt : string, ...) : int
scans the string s, extracting values according to the sscanf(3)
format fmt. The values are stored in the addresses following
fmt, addresses having the form &v, where v is some declared
variable of the correct type. Returns the number of items
successfully scanned.
split(s : string, arr : array, seps : string) : int
split(s : string, arr : array) : int
tokens(s : string, arr : array, seps : string) : int
tokens(s : string, arr : array) : int
The split function breaks the string s into fields, while the
tokens function breaks the string into tokens. A field consists
of all non-separator characters between two separator characters
or the beginning or end of the string. Thus, a field may be the
empty string. A token is a maximal, non-empty substring not
containing a separator character. The separator characters are
those given in the seps argument. If seps is not provided, the
default value is " \t\n". The functions return the number of
fields or tokens.
The fields and tokens are stored in the argument array. The
array must be string-valued and, if an index type is specified,
it must be int. The entries are indexed by consecutive integers,
starting at 0. Any values already stored in the array will be
either overwritten, or still be present after the function
returns.
I/O
print(...) : void
print( expr, ... ) prints a string representation of each
argument in turn onto stdout, followed by a newline.
printf(fmt : string, ...) : int
printf(fd : int, fmt : string, ...) : int
prints the string resulting from formatting the values of the
expressions following fmt according to the printf(3) format fmt.
Returns 0 on success. By default, it prints on stdout. If the
optional integer fd is given, output is written on the open
stream associated with fd.
scanf(fmt : string, ...) : int
scanf(fd : int, fmt : string, ...) : int
scans in values from an input stream according to the scanf(3)
format fmt. The values are stored in the addresses following
fmt, addresses having the form &v, where v is some declared
variable of the correct type. By default, it reads from stdin.
If the optional integer fd is given, input is read from the open
stream associated with fd. Returns the number of items
successfully scanned.
openF(s : string, t : string) : int
opens the file s as an I/O stream. The string argument t
specifies how the file is opened. The arguments are the same as
for the C function fopen(3). It returns an integer denoting the
stream, or -1 on error.
As usual, streams 0, 1 and 2 are already open as stdin, stdout,
and stderr, respectively. Since gvpr may use stdin to read the
input graphs, the user should avoid using this stream.
closeF(fd : int) : int
closes the open stream denoted by the integer fd. Streams 0, 1
and 2 cannot be closed. Returns 0 on success.
readL(fd : int) : string
returns the next line read from the input stream fd. It returns
the empty string "" on end of file. Note that the newline
character is left in the returned string.
Math
exp(d : double) : double
returns e to the dth power.
log(d : double) : double
returns the natural log of d.
sqrt(d : double) : double
returns the square root of the double d.
pow(d : double, x : double) : double
returns d raised to the xth power.
cos(d : double) : double
returns the cosine of d.
sin(d : double) : double
returns the sine of d.
atan2(y : double, x : double) : double
returns the arctangent of y/x in the range -pi to pi.
MIN(y : double, x : double) : double
returns the minimum of y and x.
MAX(y : double, x : double) : double
returns the maximum of y and x.
Associative Arrays
# arr : int
returns the number of elements in the array arr.
idx in arr : int
returns 1 if a value has been set for index idx in the array
arr. It returns 0 otherwise.
unset(v : array, idx) : int
removes the item indexed by idx. It returns 1 if the item
existed, 0 otherwise.
unset(v : array) : void
re-initializes the array.
Miscellaneous
exit(v : int) : void
causes gvpr to exit with the exit code v.
system(cmd : string) : int
provides the standard C function system(3). It executes cmd in
the user's shell environment, and returns the exit status of the
shell.
rand() : double
returns a pseudorandom double between 0 and 1.
srand() : int
srand(v : int) : int
sets a seed for the random number generator. The optional
argument gives the seed; if it is omitted, the current time is
used. The previous seed value is returned. srand should be
called before any calls to rand.
colorx(color : string, fmt : string) : string
translates a color from one format to another. The color
argument should be a color in one of the recognized string
representations. The fmt value should be one of "RGB", "RGBA",
"HSV", or "HSVA". An empty string is returned on error.
BUILTIN VARIABLES
gvpr provides certain special, builtin variables, whose values are set
automatically by gvpr depending on the context. Except as noted, the
user cannot modify their values.
$ : obj_t
denotes the current object (node, edge, graph) depending on the
context. It is not available in BEGIN or END clauses.
$F : string
is the name of the current input file.
$G : graph_t
denotes the current graph being processed. It is not available
in BEGIN or END clauses.
$NG : graph_t
denotes the next graph to be processed. If $NG is NULL, the
current graph $G is the last graph. Note that if the input comes
from stdin, the last graph cannot be determined until the input
pipe is closed. It is not available in BEGIN or END clauses, or
if the -n flag is used.
$O : graph_t
denotes the output graph. Before graph traversal, it is
initialized to the target graph. After traversal and any END_G
actions, if it refers to a nonempty graph, that graph is
printed onto the output stream. It is only valid in N, E and
END_G clauses. The output graph may be set by the user.
$T : graph_t
denotes the current target graph. It is a subgraph of $G and is
available only in N, E and END_G clauses.
$tgtname : string
denotes the name of the target graph. By default, it is set to
"gvpr_result". If used multiple times during the execution of
gvpr, the name will be appended with an integer. This variable
may be set by the user.
$tvroot : node_t
indicates the starting node for a (directed or undirected)
depthfirst or breadthfirst traversal of the graph (cf. $tvtype
below). The default value is NULL for each input graph. After
the traversal at the given root, if the value of $tvroot has
changed, a new traversal will begin with the new value of
$tvroot. Also, set $tvnext below.
$tvnext : node_t
indicates the next starting node for a (directed or undirected)
depthfirst or breadthfirst traversal of the graph (cf. $tvtype
below). If a traversal finishes and the $tvroot has not been
reset but the $tvnext has been set but not used, this node will
be used as the next choice for $tvroot. The default value is
NULL for each input graph.
$tvedge : edge_t
For BFS and DFS traversals, this is set to the edge used to
arrive at the current node or edge. At the beginning of a
traversal, or for other traversal types, the value is NULL.
$tvtype : tvtype_t
indicates how gvpr traverses a graph. It can only take one of
the constant values with the previx "TV_" described below.
TV_flat is the default.
In the underlying graph library cgraph(3), edges in undirected
graphs are given an arbitrary direction. This is used for
traversals, such as TV_fwd, requiring directed edges.
ARGC : int
denotes the number of arguments specified by the -a args
commandline argument.
ARGV : string array
denotes the array of arguments specified by the -a args command
line argument. The ith argument is given by ARGV[i].
BUILTIN CONSTANTS
There are several symbolic constants defined by gvpr.
NULL : obj_t
a null object reference, equivalent to 0.
TV_flat : tvtype_t
a simple, flat traversal, with graph objects visited in
seemingly arbitrary order.
TV_ne : tvtype_t
a traversal which first visits all of the nodes, then all of the
edges.
TV_en : tvtype_t
a traversal which first visits all of the edges, then all of the
nodes.
TV_dfs : tvtype_t
TV_postdfs : tvtype_t
TV_prepostdfs : tvtype_t
a traversal of the graph using a depthfirst search on the
underlying undirected graph. To do the traversal, gvpr will
check the value of $tvroot. If this has the same value that it
had previously (at the start, the previous value is initialized
to NULL.), gvpr will simply look for some unvisited node and
traverse its connected component. On the other hand, if $tvroot
has changed, its connected component will be toured, assuming it
has not been previously visited or, if $tvroot is NULL, the
traversal will stop. Note that using TV_dfs and $tvroot, it is
possible to create an infinite loop.
By default, the traversal is done in pre-order. That is, a node
is visited before all of its unvisited edges. For TV_postdfs,
all of a node's unvisited edges are visited before the node. For
TV_prepostdfs, a node is visited twice, before and after all of
its unvisited edges.
TV_fwd : tvtype_t
TV_postfwd : tvtype_t
TV_prepostfwd : tvtype_t
A traversal of the graph using a depthfirst search on the graph
following only forward arcs. The choice of roots for the
traversal is the same as described for TV_dfs above. The
different order of visitation specified by TV_fwd, TV_postfwd
and TV_prepostfwd are the same as those specified by the
analogous traversals TV_dfs, TV_postdfs and TV_prepostdfs.
TV_rev : tvtype_t
TV_postrev : tvtype_t
TV_prepostrev : tvtype_t
A traversal of the graph using a depthfirst search on the graph
following only reverse arcs. The choice of roots for the
traversal is the same as described for TV_dfs above. The
different order of visitation specified by TV_rev, TV_postrev
and TV_prepostrev are the same as those specified by the
analogous traversals TV_dfs, TV_postdfs and TV_prepostdfs.
TV_bfs : tvtype_t
A traversal of the graph using a breadthfirst search on the
graph ignoring edge directions. See the item on TV_dfs above for
the role of $tvroot.
EXAMPLES
gvpr -i 'N[color=="blue"]' file.gv
Generate the nodeinduced subgraph of all nodes with color blue.
gvpr -c 'N[color=="blue"]{color = "red"}' file.gv
Make all blue nodes red.
BEGIN { int n, e; int tot_n = 0; int tot_e = 0; }
BEG_G {
n = nNodes($G);
e = nEdges($G);
printf ("%d nodes %d edges %s\n", n, e, $G.name);
tot_n += n;
tot_e += e;
}
END { printf ("%d nodes %d edges total\n", tot_n, tot_e) }
Version of the program gc.
gvpr -c ""
Equivalent to nop.
BEG_G { graph_t g = graph ("merge", "S"); }
E {
node_t h = clone(g,$.head);
node_t t = clone(g,$.tail);
edge_t e = edge(t,h,"");
e.weight = e.weight + 1;
}
END_G { $O = g; }
Produces a strict version of the input graph, where the weight
attribute of an edge indicates how many edges from the input graph the
edge represents.
BEGIN {node_t n; int deg[]}
E{deg[head]++; deg[tail]++; }
END_G {
for (deg[n]) {
printf ("deg[%s] = %d\n", n.name, deg[n]);
}
}
Computes the degrees of nodes with edges.
BEGIN {
int i, indent;
int seen[string];
void prInd (int cnt) {
for (i = 0; i < cnt; i++) printf (" ");
}
}
BEG_G {
$tvtype = TV_prepostfwd;
$tvroot = node($,ARGV[0]);
}
N {
if (seen[$.name]) indent--;
else {
prInd(indent);
print ($.name);
seen[$.name] = 1;
indent++;
}
}
Prints the depth-first traversal of the graph, starting with the node
whose name is ARGV[0], as an indented list.
ENVIRONMENT
GVPRPATH
Colonseparated list of directories to be searched to find the
file specified by the -f option. gvpr has a default list built
in. If GVPRPATH is not defined, the default list is used. If
GVPRPATH starts with colon, the list is formed by appending
GVPRPATH to the default list. If GVPRPATH ends with colon, the
list is formed by appending the default list to GVPRPATH.
Otherwise, GVPRPATH is used for the list.
On Windows systems, replace ``colon'' with ``semicolon'' in the
previous paragraph.
BUGS AND WARNINGS
Scripts should be careful deleting nodes during N{} and E{} blocks
using BFS and DFS traversals as these rely on stacks and queues of
nodes.
When the program is given as a command line argument, the usual shell
interpretation takes place, which may affect some of the special names
in gvpr. To avoid this, it is best to wrap the program in single
quotes.
If string constants contain pattern metacharacters that you want to
escape to avoid pattern matching, two backslashes will probably be
necessary, as a single backslash will be lost when the string is
originally scanned. Usually, it is simpler to use strcmp to avoid
pattern matching.
As of 24 April 2008, gvpr switched to using a new, underlying graph
library, which uses the simpler model that there is only one copy of a
node, not one copy for each subgraph logically containing it. This
means that iterators such as nxtnode cannot traverse a subgraph using
just a node argument. For this reason, subgraph traversal requires new
functions ending in "_sg", which also take a subgraph argument. The
versions without that suffix will always traverse the root graph.
There is a single global scope, except for formal function parameters,
and even these can interfere with the type system. Also, the extent of
all variables is the entire life of the program. It might be
preferable for scope to reflect the natural nesting of the clauses, or
for the program to at least reset locally declared variables. For now,
it is advisable to use distinct names for all variables.
If a function ends with a complex statement, such as an IF statement,
with each branch doing a return, type checking may fail. Functions
should use a return at the end.
The expr library does not support string values of (char*)0. This
means we can't distinguish between "" and (char*)0 edge keys. For the
purposes of looking up and creating edges, we translate "" to be
(char*)0, since this latter value is necessary in order to look up any
edge with a matching head and tail.
Related to this, strings converted to integers act like char pointers,
getting the value 0 or 1 depending on whether the string consists
solely of zeroes or not. Thus, the ((int)"2") evaluates to 1.
The language inherits the usual C problems such as dangling references
and the confusion between '=' and '=='.
AUTHOR
Emden R. Gansner <erg@research.att.com>
SEE ALSO
awk(1), gc(1), dot(1), nop(1), expr(3), cgraph(3) 29 August 2013 GVPR(1)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
