time - overview of time and timers


   Real time and process time
   Real  time  is  defined  as time measured from some fixed point, either
   from a standard point in the past (see the description of the Epoch and
   calendar  time below), or from some point (e.g., the start) in the life
   of a process (elapsed time).

   Process time is defined as the amount of CPU time used  by  a  process.
   This  is  sometimes  divided into user and system components.  User CPU
   time is the time spent executing code in user mode.  System CPU time is
   the  time spent by the kernel executing in system mode on behalf of the
   process (e.g., executing system calls).  The  time(1)  command  can  be
   used  to determine the amount of CPU time consumed during the execution
   of a program.  A program can determine the amount of CPU  time  it  has
   consumed using times(2), getrusage(2), or clock(3).

   The hardware clock
   Most computers have a (battery-powered) hardware clock which the kernel
   reads at boot time in order to  initialize  the  software  clock.   For
   further details, see rtc(4) and hwclock(8).

   The software clock, HZ, and jiffies
   The  accuracy  of  various  system  calls  that  set  timeouts,  (e.g.,
   select(2), sigtimedwait(2)) and measure CPU time  (e.g.,  getrusage(2))
   is  limited by the resolution of the software clock, a clock maintained
   by the kernel which measures time in jiffies.  The size of a  jiffy  is
   determined by the value of the kernel constant HZ.

   The  value  of HZ varies across kernel versions and hardware platforms.
   On i386 the situation is as follows: on kernels  up  to  and  including
   2.4.x,  HZ was 100, giving a jiffy value of 0.01 seconds; starting with
   2.6.0, HZ was raised to 1000, giving a jiffy of 0.001  seconds.   Since
   kernel 2.6.13, the HZ value is a kernel configuration parameter and can
   be 100, 250 (the  default)  or  1000,  yielding  a  jiffies  value  of,
   respectively,  0.01,  0.004,  or 0.001 seconds.  Since kernel 2.6.20, a
   further frequency is available: 300, a number that divides  evenly  for
   the common video frame rates (PAL, 25 HZ; NTSC, 30 HZ).

   The  times(2)  system  call is a special case.  It reports times with a
   granularity  defined  by  the  kernel  constant  USER_HZ.    User-space
   applications   can   determine   the   value  of  this  constant  using

   High-resolution timers
   Before Linux 2.6.21, the accuracy of timer and sleep system calls  (see
   below) was also limited by the size of the jiffy.

   Since  Linux  2.6.21,  Linux  supports  high-resolution  timers (HRTs),
   optionally configurable via CONFIG_HIGH_RES_TIMERS.  On a  system  that
   supports  HRTs,  the  accuracy  of  sleep  and timer system calls is no
   longer constrained by the jiffy, but instead can be as accurate as  the
   hardware  allows  (microsecond accuracy is typical of modern hardware).
   You can determine  whether  high-resolution  timers  are  supported  by
   checking  the  resolution  returned  by  a  call  to clock_getres(2) or
   looking at the "resolution" entries in /proc/timer_list.

   HRTs are not supported on  all  hardware  architectures.   (Support  is
   provided on x86, arm, and powerpc, among others.)

   The Epoch
   UNIX  systems  represent  time  in  seconds since the Epoch, 1970-01-01
   00:00:00 +0000 (UTC).

   A program can determine the calendar time using gettimeofday(2),  which
   returns  time (in seconds and microseconds) that have elapsed since the
   Epoch; time(2) provides similar information, but only with accuracy  to
   the   nearest   second.    The   system   time  can  be  changed  using

   Broken-down time
   Certain library functions use a  structure  of  type  tm  to  represent
   broken-down  time,  which stores time value separated out into distinct
   components (year,  month,  day,  hour,  minute,  second,  etc.).   This
   structure is described in ctime(3), which also describes functions that
   convert between calendar time  and  broken-down  time.   Functions  for
   converting    between    broken-down    time   and   printable   string
   representations of the time are described in ctime(3), strftime(3), and

   Sleeping and setting timers
   Various  system  calls  and functions allow a program to sleep (suspend
   execution)  for  a  specified  period  of   time;   see   nanosleep(2),
   clock_nanosleep(2), and sleep(3).

   Various  system  calls  allow  a process to set a timer that expires at
   some point in the future, and optionally  at  repeated  intervals;  see
   alarm(2), getitimer(2), timerfd_create(2), and timer_create(2).

   Timer slack
   Since  Linux  2.6.28, it is possible to control the "timer slack" value
   for a thread.  The timer slack is the  length  of  time  by  which  the
   kernel  may delay the wake-up of certain system calls that block with a
   timeout.  Permitting this delay allows the kernel to  coalesce  wake-up
   events, thus possibly reducing the number of system wake-ups and saving
   power.  For more details, see the description of  PR_SET_TIMERSLACK  in


   date(1), time(1), timeout(1), adjtimex(2), alarm(2), clock_gettime(2),
   clock_nanosleep(2), getitimer(2), getrlimit(2), getrusage(2),
   gettimeofday(2), nanosleep(2), stat(2), time(2), timer_create(2),
   timerfd_create(2), times(2), utime(2), adjtime(3), clock(3),
   clock_getcpuclockid(3), ctime(3), ntp_adjtime(3), ntp_gettime(3),
   pthread_getcpuclockid(3), sleep(3), strftime(3), strptime(3),
   timeradd(3), usleep(3), rtc(4), hwclock(8)


   This page is part of release 4.09 of the Linux man-pages project.  A
   description of the project, information about reporting bugs, and the
   latest version of this page, can be found at


Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.

Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.

Free Software

Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.

Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.

Free Books

The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.

Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.


Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.

Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.