systemd.time(7)
NAME
systemd.time - Time and date specifications
DESCRIPTION
In systemd, timestamps, time spans, and calendar events are displayed and may be specified in closely related syntaxes.
DISPLAYING TIME SPANS
Time spans refer to time durations. On display, systemd will present
time spans as a space-separated series of time values each suffixed by
a time unit. Example:
2h 30min
All specified time values are meant to be added up. The above hence
refers to 150 minutes. Display is locale-independent, only English
names for the time units are used.
PARSING TIME SPANS
When parsing, systemd will accept the same time span syntax. Separating
spaces may be omitted. The following time units are understood:
* usec, us
* msec, ms
* seconds, second, sec, s
* minutes, minute, min, m
* hours, hour, hr, h
* days, day, d
* weeks, week, w
* months, month, M (defined as 30.44 days)
* years, year, y (defined as 365.25 days)
If no time unit is specified, generally seconds are assumed, but some
exceptions exist and are marked as such. In a few cases "ns", "nsec" is
accepted too, where the granularity of the time span permits this.
Parsing is generally locale-independent, non-English names for the time
units are not accepted.
Examples for valid time span specifications:
2 h
2hours
48hr
1y 12month
55s500ms
300ms20s 5day
DISPLAYING TIMESTAMPS
Timestamps refer to specific, unique points in time. On display,
systemd will format these in the local timezone as follows:
Fri 2012-11-23 23:02:15 CET
The weekday is printed in the abbreviated English language form. The
formatting is locale-independent.
In some cases timestamps are shown in the UTC timezone instead of the
local timezone, which is indicated via the "UTC" timezone specifier in
the output.
In some cases timestamps are shown with microsecond granularity. In
this case the sub-second remainder is separated by a full stop from the
seconds component.
PARSING TIMESTAMPS
When parsing, systemd will accept a similar syntax, but expects no
timezone specification, unless it is given as the literal string "UTC"
(for the UTC timezone) or is specified to be the locally configured
timezone. Other timezones than the local and UTC are not supported. The
weekday specification is optional, but when the weekday is specified,
it must either be in the abbreviated ("Wed") or non-abbreviated
("Wednesday") English language form (case does not matter), and is not
subject to the locale choice of the user. Either the date, or the time
part may be omitted, in which case the current date or 00:00:00,
respectively, is assumed. The seconds component of the time may also be
omitted, in which case ":00" is assumed. Year numbers may be specified
in full or may be abbreviated (omitting the century).
A timestamp is considered invalid if a weekday is specified and the
date does not match the specified day of the week.
When parsing, systemd will also accept a few special placeholders
instead of timestamps: "now" may be used to refer to the current time
(or of the invocation of the command that is currently executed).
"today", "yesterday", and "tomorrow" refer to 00:00:00 of the current
day, the day before, or the next day, respectively.
When parsing, systemd will also accept relative time specifications. A
time span (see above) that is prefixed with "+" is evaluated to the
current time plus the specified time span. Correspondingly, a time span
that is prefixed with "-" is evaluated to the current time minus the
specified time span. Instead of prefixing the time span with "+" or
"-", it may also be suffixed with a space and the word "left" or "ago".
Finally, a timespan prefixed with "@" is evaluated relative to the UNIX
time epoch 1st Jan, 1970, 00:00.
Examples for valid timestamps and their normalized form (assuming the
current time was 2012-11-23 18:15:22 and the timezone was UTC+8, for
example TZ=Asia/Shanghai):
Fri 2012-11-23 11:12:13 Fri 2012-11-23 11:12:13
2012-11-23 11:12:13 Fri 2012-11-23 11:12:13
2012-11-23 11:12:13 UTC Fri 2012-11-23 19:12:13
2012-11-23 Fri 2012-11-23 00:00:00
12-11-23 Fri 2012-11-23 00:00:00
11:12:13 Fri 2012-11-23 11:12:13
11:12 Fri 2012-11-23 11:12:00
now Fri 2012-11-23 18:15:22
today Fri 2012-11-23 00:00:00
today UTC Fri 2012-11-23 16:00:00
yesterday Fri 2012-11-22 00:00:00
tomorrow Fri 2012-11-24 00:00:00
+3h30min Fri 2012-11-23 21:45:22
-5s Fri 2012-11-23 18:15:17
11min ago Fri 2012-11-23 18:04:22
@1395716396 Tue 2014-03-25 03:59:56
Note that timestamps displayed by remote systems with a non-matching
timezone are usually not parsable locally, as the timezone component is
not understood (unless it happens to be "UTC").
Timestamps may also be specified with microsecond granularity. The
sub-second remainder is expected separated by a full stop from the
seconds component. Example:
2014-03-25 03:59:56.654563
In some cases, systemd will display a relative timestamp (relative to
the current time, or the time of invocation of the command) instead of
or in addition to an absolute timestamp as described above. A relative
timestamp is formatted as follows:
2 months 5 days ago
Note that a relative timestamp is also accepted where a timestamp is
expected (see above).
CALENDAR EVENTS
Calendar events may be used to refer to one or more points in time in a
single expression. They form a superset of the absolute timestamps
explained above:
Thu,Fri 2012-*-1,5 11:12:13
The above refers to 11:12:13 of the first or fifth day of any month of
the year 2012, but only if that day is a Thursday or Friday.
The weekday specification is optional. If specified, it should consist
of one or more English language weekday names, either in the
abbreviated (Wed) or non-abbreviated (Wednesday) form (case does not
matter), separated by commas. Specifying two weekdays separated by ".."
refers to a range of continuous weekdays. "," and ".." may be
combined freely.
In the date and time specifications, any component may be specified as
"*" in which case any value will match. Alternatively, each component
can be specified as a list of values separated by commas. Values may
also be suffixed with "/" and a repetition value, which indicates that
the value itself and the value plus all multiples of the repetition
value are matched. Each component may also contain a range of values
separated by "..".
The seconds component may contain decimal fractions both in the value
and the repetition. All fractions are rounded to 6 decimal places.
Either time or date specification may be omitted, in which case the
current day and 00:00:00 is implied, respectively. If the second
component is not specified, ":00" is assumed.
A timezone specification is not expected, unless it is given as the
literal string "UTC", or the local timezone, similar to the supported
syntax of timestamps (see above). Non-local timezones except for UTC
are not supported.
The special expressions "minutely", "hourly", "daily", "monthly",
"weekly", "yearly", "quarterly", "semiannually" may be used as calendar
events which refer to "*-*-* *:*:00", "*-*-* *:00:00",
"*-*-* 00:00:00", "*-*-01 00:00:00", "Mon *-*-* 00:00:00",
"*-01-01 00:00:00", "*-01,04,07,10-01 00:00:00" and "*-01,07-01
00:00:00", respectively.
Examples for valid timestamps and their normalized form:
Sat,Thu,Mon..Wed,Sat..Sun Mon..Thu,Sat,Sun *-*-* 00:00:00
Mon,Sun 12-*-* 2,1:23 Mon,Sun 2012-*-* 01,02:23:00
Wed *-1 Wed *-*-01 00:00:00
Wed..Wed,Wed *-1 Wed *-*-01 00:00:00
Wed, 17:48 Wed *-*-* 17:48:00
Wed..Sat,Tue 12-10-15 1:2:3 Tue..Sat 2012-10-15 01:02:03
*-*-7 0:0:0 *-*-07 00:00:00
10-15 *-10-15 00:00:00
monday *-12-* 17:00 Mon *-12-* 17:00:00
Mon,Fri *-*-3,1,2 *:30:45 Mon,Fri *-*-01,02,03 *:30:45
12,14,13,12:20,10,30 *-*-* 12,13,14:10,20,30:00
12..14:10,20,30 *-*-* 12,13,14:10,20,30:00
mon,fri *-1/2-1,3 *:30:45 Mon,Fri *-01/2-01,03 *:30:45
03-05 08:05:40 *-03-05 08:05:40
08:05:40 *-*-* 08:05:40
05:40 *-*-* 05:40:00
Sat,Sun 12-05 08:05:40 Sat,Sun *-12-05 08:05:40
Sat,Sun 08:05:40 Sat,Sun *-*-* 08:05:40
2003-03-05 05:40 2003-03-05 05:40:00
05:40:23.4200004/3.1700005 05:40:23.420000/3.170001
2003-02..04-05 2003-02,03,04-05 00:00:00
2003-03-05 05:40 UTC 2003-03-05 05:40:00 UTC
2003-03-05 2003-03-05 00:00:00
03-05 *-03-05 00:00:00
hourly *-*-* *:00:00
daily *-*-* 00:00:00
daily UTC *-*-* 00:00:00 UTC
monthly *-*-01 00:00:00
weekly Mon *-*-* 00:00:00
yearly *-01-01 00:00:00
annually *-01-01 00:00:00
*:2/3 *-*-* *:02/3:00
Calendar events are used by timer units, see systemd.timer(5) for
details.
SEE ALSO
systemd(1), journalctl(1), systemd.timer(5), systemd.unit(5), systemd.directives(7)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
