setfont(8)
NAME
setfont - load EGA/VGA console screen font
SYNOPSIS
setfont [-O font+umap.orig] [-o font.orig] [-om cmap.orig] [-ou umap.orig] [-N] [font.new ...] [-m cmap] [-u umap] [-C console] [-hH] [-v] [-V]
DESCRIPTION
The setfont command reads a font from the file font.new and loads it
into the EGA/VGA character generator, and optionally outputs the
previous font. It can also load various mapping tables and output the
previous versions.
If no args are given (or only the option -N for some number N), then a
default (8xN) font is loaded (see below). One may give several small
fonts, all containing a Unicode table, and setfont will combine them
and load the union. Typical use:
setfont
Load a default font.
setfont drdos8x16
Load a given font (here the 448-glyph drdos font).
setfont cybercafe -u cybercafe
Load a given font that does not have a Unicode map and provide
one explicitly.
setfont LatArCyrHeb-19 -m 8859-2
Load a given font (here a 512-glyph font combining several
character sets) and indicate that one's local character set is
ISO 8859-2.
Note: if a font has more than 256 glyphs, only 8 out of 16 colors can
be used simultaneously. It can make console perception worse (loss of
intensity and even some colors).
FONT FORMATS
The standard Linux font format is the PSF font. It has a header describing font properties like character size, followed by the glyph bitmaps, optionally followed by a Unicode mapping table giving the Unicode value for each glyph. Several other (obsolete) font formats are recognized. If the input file has code page format (probably with suffix .cp), containing three fonts with sizes e.g. 8x8, 8x14 and 8x16, then one of the options -8 or -14 or -16 must be used to select one. Raw font files are binary files of size 256*N bytes, containing bit images for each of 256 characters, one byte per scan line, and N bytes per character (0 < N <= 32). Most fonts have a width of 8 bits, but with the framebuffer device (fb) other widths can be used.
FONT HEIGHT
The program setfont has no built-in knowledge of VGA video modes, but just asks the kernel to load the character ROM of the video card with certain bitmaps. However, since Linux 1.3.1 the kernel knows enough about EGA/VGA video modes to select a different line distance. The default character height will be the number N inferred from the font or specified by option. However, the user can specify a different character height H using the -h option.
CONSOLE MAPS
Several mappings are involved in the path from user program output to console display. If the console is in utf8 mode (see unicode_start(1)) then the kernel expects that user program output is coded as UTF-8 (see utf-8(7)), and converts that to Unicode (ucs2). Otherwise, a translation table is used from the 8-bit program output to 16-bit Unicode values. Such a translation table is called a Unicode console map. There are four of them: three built into the kernel, the fourth settable using the -m option of setfont. An escape sequence chooses between these four tables; after loading a cmap, setfont will output the escape sequence Esc ( K that makes it the active translation. Suitable arguments for the -m option are for example 8859-1, 8859-2, ..., 8859-15, cp437, ..., cp1250. Given the Unicode value of the symbol to be displayed, the kernel finds the right glyph in the font using the Unicode mapping info of the font and displays it. Old fonts do not have Unicode mapping info, and in order to handle them there are direct-to-font maps (also loaded using -m) that give a correspondence between user bytes and font positions. The most common correspondence is the one given in the file trivial (where user byte values are used directly as font positions). Other correspondences are sometimes preferable since the PC video hardware expects line drawing characters in certain font positions. Giving a -m none argument inhibits the loading and activation of a mapping table. The previous console map can be saved to a file using the -om file option. These options of setfont render mapscrn(8) obsolete. (However, it may be useful to read that man page.)
UNICODE FONT MAPS
The correspondence between the glyphs in the font and Unicode values is described by a Unicode mapping table. Many fonts have a Unicode mapping table included in the font file, and an explicit table can be indicated using the -u option. The program setfont will load such a Unicode mapping table, unless a -u none argument is given. The previous Unicode mapping table will be saved as part of the saved font file when the -O option is used. It can be saved to a separate file using the -ou file option. These options of setfont render loadunimap(8) obsolete. The Unicode mapping table should assign some glyph to the `missing character' value U+fffd, otherwise missing characters are not translated, giving a usually very confusing result. Usually no mapping table is needed, and a Unicode mapping table is already contained in the font (sometimes this is indicated by the .psfu extension), so that most users need not worry about the precise meaning and functioning of these mapping tables. One may add a Unicode mapping table to a psf font using psfaddtable(1).
OPTIONS
-h H Override font height.
-m file
Load console map or Unicode console map from file.
-o file
Save previous font in file.
-O file
Save previous font and Unicode map in file.
-om file
Store console map in file.
-ou file
Save previous Unicode map in file.
-u file
Load Unicode table describing the font from file.
-C console
Set the font for the indicated console. (May require root
permissions.)
-v Be verbose.
-V Print version and exit.
NOTE
PC video hardware allows one to use the "intensity" bit either to indicate brightness, or to address 512 (instead of 256) glyphs in the font. So, if the font has more than 256 glyphs, the console will be reduced to 8 (instead of 16) colors.
FILES
/usr/share/consolefonts is the default font directory. /usr/share/unimaps is the default directory for Unicode maps. /usr/share/consoletrans is the default directory for screen mappings. The default font is a file default (or default8xN if the -N option was given for some number N) perhaps with suitable extension (like .psf).
SEE ALSO
psfaddtable(1), unicode_start(1), loadunimap(8), utf-8(7), mapscrn(8) 11 Feb 2001 SETFONT(8)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
