sane-net(5)


NAME

   sane-net - SANE network backend

DESCRIPTION

   The  sane-net  library  implements  a  SANE  (Scanner  Access Now Easy)
   backend that provides access to image  acquisition  devices  through  a
   network connection.  This makes it possible to control devices attached
   to a remote host and also provides a means to  grant  users  access  to
   protected resources.

DEVICE NAMES

   This backend expects device names of the form:

          host:device

   Where  host is the name (or IP address) of the (remote) host and device
   is the name of the device on this host that should  be  addressed.   If
   the device name does not contain a colon (:), then the entire string is
   treated as the device string for the default host.  The default host is
   the host listed last in the configuration file (see below).

   An IPv6 address can be specified enclosed in square brackets:

          [::1]:device

CONFIGURATION

   The  net.conf  file  contains  both  backend options and a list of host
   names (or IP addresses) that should be  contacted  for  scan  requests.
   Anything  that isn't one of the options listed below will be treated as
   an host name.

   connect_timeout = nsecs
          Timeout (in seconds) for the initial  connection  to  the  saned
          server.  This will prevent the backend from blocking for several
          minutes trying to connect to an unresponsive saned host (network
          outage,    host    down,    ...).   The   environment   variable
          SANE_NET_TIMEOUT can also be used  to  specify  the  timeout  at
          runtime.

   Empty  lines and lines starting with a hash mark (#) are ignored.  Note
   that IPv6 addresses in this file do not need to be enclosed  in  square
   brackets.  A sample configuration file is shown below:

          scan-server.somedomain.firm
          192.168.0.1
          # this is a comment
          localhost
          ::1

   The  above  list of hosts can be extended at run-time using environment
   variable  SANE_NET_HOSTS.   This  environment  variable  is  a   colon-
   separated list of hostnames or IP addresses that should be contacted in
   addition to  the  hosts  mentioned  in  the  configuration  file.   For
   example, a user could set the environment variable to the string:

          new.scanner.com:[::1]:192.168.0.2:scanner.univ.edu

   To  request  that  hosts  new.scanner.com  ,  [::1]  ,  192.168.0.2 and
   scanner.univ.edu are contacted in addition to the hosts listed above.

   For this backend to function properly, it is also necessary  to  define
   the  sane-port  service  in  /etc/services.  The sane service should be
   defined using a line of the following form:

          sane-port 6566/tcp # SANE network scanner daemon

FILES

   /etc/sane.d/net.conf
          The  backend  configuration  file  (see  also   description   of
          SANE_CONFIG_DIR below).

   /usr/lib/arch_triplet/sane/libsane-net.a
          The static library implementing this backend.

   /usr/lib/arch_triplet/sane/libsane-net.so
          The shared library implementing this backend (present on systems
          that support dynamic loading).

ENVIRONMENT

   SANE_CONFIG_DIR
          This environment variable specifies the list of directories that
          may contain the configuration file.  Under UNIX, the directories
          are separated by a colon (`:'), under OS/2, they  are  separated
          by  a  semi-colon  (`;').   If  this  variable  is  not set, the
          configuration file  is  searched  in  two  default  directories:
          first,   the   current  working  directory  (".")  and  then  in
          /etc/sane.d.  If the value of the environment variable ends with
          the  directory separator character, then the default directories
          are searched after the explicitly  specified  directories.   For
          example,  setting SANE_CONFIG_DIR to "/tmp/config:" would result
          in  directories  "tmp/config",  ".",  and  "/etc/sane.d"   being
          searched (in this order).

   SANE_NET_HOSTS
          A  colon-separated  list  of  host  names  or IP addresses to be
          contacted by this backend.

   SANE_NET_TIMEOUT
          Number of seconds to wait for a response from the  saned  server
          for the initial connection request.

   SANE_DEBUG_NET
          If  the  library  was  compiled with debug support enabled, this
          environment variable controls the debug level for this  backend.
          E.g.,  a  value  of 128 requests all debug output to be printed.
          Smaller levels reduce verbosity.

BUGS

   If saned has timed out, the net backend  may  loop  with  authorization
   requests.

SEE ALSO

   sane(7), saned(8), sane-dll(5), scanimage(1)

   http://www.penguin-breeder.org/?page=sane-net

AUTHOR

   David Mosberger and Andreas Beck

                              14 Jul 2008                      sane-net(5)





Opportunity


Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.

Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.





Free Software


Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.


Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.





Free Books


The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.


Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.





Education


Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.


Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.