sane-gt68xx(5)
NAME
sane-gt68xx - SANE backend for GT-68XX based USB flatbed scanners
DESCRIPTION
The sane-gt68xx library implements a SANE (Scanner Access Now Easy) backend that provides access to USB flatbed scanners based on the Grandtech GT-6801 and GT-6816 chips. A list of supported scanners can be found on the gt68xx backend homepage: http://www.meier-geinitz.de/sane/gt68xx-backend/. This is BETA software. Especially if you test new or untested scanners, keep your hand at the scanner's plug and unplug it, if the head bumps at the end of the scan area. If you own a scanner other than the ones listed on the gt68xx homepage that works with this backend, please let me know this by sending the scanner's exact model name and the USB vendor and device ids (e.g. from sane-find-scanner or syslog) to me. Even if the scanner's name is only slightly different from the models already listed as supported, please let me know. If you own a scanner that isn't detected by the gt68xx backend but has a GT-6801 or GT-6816 chipset, you can try to add it to the backend. Have a look at the following web page: http://www.meier-geinitz.de/sane/gt68xx-backend/adding.html
LIBUSB ISSUES
Please use libusb-0.1.8 or later. Without libusb or with older libusb versions all kinds of trouble can be expected. The scanner should be found by sane-find-scanner without further actions. For setting permissions and general USB information looks at sane-usb(5).
FIRMWARE FILE
You need a firmware file for your scanner. That's a small file containing software that will be uploaded to the scanner's memory. It's usually named *.usb, e.g. PS1fw.usb. It comes on the installation CD that was provided by the manufacturer, but it may be packaged together with the installation program in an .exe file. For Mustek scanners, the file can be downloaded from the gt68xx backend homepage. For other scanners, check the CD for .usb files. If you only find *.cab files, try cabextract to unpack. If everything else fails, you must install the Windows driver and get the firmware from there (usually in the windows/system or system32 directories). Put that firmware file into /usr/share/sane/gt68xx/. Make sure that it's readable by everyone.
CONFIGURATION
The contents of the gt68xx.conf file is a list of usb lines containing
vendor and product ids that correspond to USB scanners. The file can
also contain option lines. Empty lines and lines starting with a hash
mark (#) are ignored. The scanners are autodetected by usb vendor_id
product_id statements which are already included into gt68xx.conf.
"vendor_id" and "product_id" are hexadecimal numbers that identify the
scanner.
The override, firmware, vendor, model, and afe options must be placed
after the usb line they refer to.
Option override is used to override the default model parameters.
That's necessary for some scanners that use the same vendor/product ids
but are different. For these scanners there are already commented out
override lines in the configuration file. override
mustek-scanexpress-1200-ub-plus is necessary for the Mustek Scanexpress
1200 UB Plus, the Medion/Lifetec/Tevion LT 9452, and the Trust Compact
Scan USB 19200. override artec-ultima-2000 is used for the Artec
Ultima 2000, the Boeder SmartScan Slim Edition, the Medion/ Lifetec/
Tevion/ Cytron MD/LT 9385, the Medion/ Lifetec/ Tevion MD 9458, and the
Trust Flat Scan USB 19200. override mustek-bearpaw-2400-cu is
necessary for the Mustek BearPaw 2400 CU and the Fujitsu 1200CUS. The
override option must be the first one after the usb line.
Option firmware selects the name and path of the firmware file. It's
only necessary if the default (or override) doesn't work. The default
firmware directory is /usr/share/sane/gt68xx/. You may need to create
this directory. If you want to place the firmware files at a different
path, use a firmware line.
The vendor and model options are not absolutely necessary but for
convenience. Quite a lot of scanners from different manufacturers share
the same vendor/product ids so you can set the "correct" name here.
The afe option allows one to set custom offset and gain values for the
Analog FrontEnd of the scanner. This option can be either used to
select the AFE values if automatic coarse calibration is disabled, or
to make automatic coarse calibration faster. For the latter usage,
enable debug level 3 (see below), scan an image and look for debug line
string with "afe". Copy this line to gt68xx.conf. The option has six
parameters: red offset, red gain, green offset, green gain, blue
offset, and blue gain.
A sample configuration file is shown below:
usb 0x05d8 0x4002
override "mustek-scanexpress-1200-ub-plus"
firmware "/opt/gt68xx/SBfw.usb"
vendor "Trust"
model "Compact Scan USB 19200"
afe 0x20 0x02 0x22 0x03 0x1f 0x04
FILES
/etc/sane.d/gt68xx.conf
The backend configuration file (see also description of
SANE_CONFIG_DIR below).
/usr/lib/arch_triplet/sane/libsane-gt68xx.a
The static library implementing this backend.
/usr/lib/arch_triplet/sane/libsane-gt68xx.so
The shared library implementing this backend (present on systems
that support dynamic loading).
ENVIRONMENT
SANE_CONFIG_DIR
This environment variable specifies the list of directories that
may contain the configuration file. Under UNIX, the directories
are separated by a colon (`:'), under OS/2, they are separated
by a semi-colon (`;'). If this variable is not set, the
configuration file is searched in two default directories:
first, the current working directory (".") and then in
/etc/sane.d. If the value of the environment variable ends with
the directory separator character, then the default directories
are searched after the explicitly specified directories. For
example, setting SANE_CONFIG_DIR to "/tmp/config:" would result
in directories "tmp/config", ".", and "/etc/sane.d" being
searched (in this order).
SANE_DEBUG_GT68XX
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend.
Higher debug levels increase the verbosity of the output. If the
debug level is set to 1 or higher, some debug options become
available that are normally hidden. Handle them with care.
Example: export SANE_DEBUG_GT68XX=4
SEE ALSO
sane(7), sane-usb(5), sane-artec_eplus48u(5) sane-plustek(5), sane-ma1509(5), sane-mustek_usb(5), sane-mustek(5), sane-mustek_pp(5) /usr/share/doc/libsane/gt68xx/gt68xx.CHANGES http://www.meier-geinitz.de/sane/gt68xx
AUTHOR
Henning Meier-Geinitz <[email protected]> The original gt68xx driver was written by Sergey Vlasov, Andreas Nowack, and David Stevenson. Thanks for sending patches and answering questions to them and all the other contributors.
BUGS
The first few lines of the image are garbage for the 2400 TA Plus. Interpolation should be used instead of just copying data, when the X- and Y-resolution differ. Support for buttons is missing. More detailed bug information is available at the gt68xx backend homepage http://www.meier-geinitz.de/sane/gt68xx-backend/. Please contact us if you find a bug or missing feature: <[email protected]>. Please send a debug log if your scanner isn't detected correctly (see SANE_DEBUG_GT68XX above). 13 Jul 2008 sane-gt68xx(5)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
