postsuper(1)
NAME
postsuper - Postfix superintendent
SYNOPSIS
postsuper [-psSv] [-c config_dir] [-d queue_id]
[-h queue_id] [-H queue_id]
[-r queue_id] [directory ...]
DESCRIPTION
The postsuper(1) command does maintenance jobs on the Postfix queue. Use of the command is restricted to the superuser. See the postqueue(1) command for unprivileged queue operations such as listing or flushing the mail queue. By default, postsuper(1) performs the operations requested with the -s and -p command-line options on all Postfix queue directories - this includes the incoming, active and deferred directories with mail files and the bounce, defer, trace and flush directories with log files. Options: -c config_dir The main.cf configuration file is in the named directory instead of the default configuration directory. See also the MAIL_CONFIG environment setting below. -d queue_id Delete one message with the named queue ID from the named mail queue(s) (default: hold, incoming, active and deferred). If a queue_id of - is specified, the program reads queue IDs from standard input. For example, to delete all mail with exactly one recipient user@example.com: mailq | tail +2 | grep -v '^ *(' | awk BEGIN { RS = "" } # $7=sender, $8=recipient1, $9=recipient2 { if ($8 == "user@example.com" && $9 == "") print $1 } | tr -d '*!' | postsuper -d - Specify "-d ALL" to remove all messages; for example, specify "-d ALL deferred" to delete all mail in the deferred queue. As a safety measure, the word ALL must be specified in upper case. Warning: Postfix queue IDs are reused (always with Postfix <= 2.8; and with Postfix >= 2.9 when enable_long_queue_ids=no). There is a very small possibility that postsuper deletes the wrong message file when it is executed while the Postfix mail system is delivering mail. The scenario is as follows: 1) The Postfix queue manager deletes the message that postsuper(1) is asked to delete, because Postfix is finished with the message (it is delivered, or it is returned to the sender). 2) New mail arrives, and the new message is given the same queue ID as the message that postsuper(1) is supposed to delete. The probability for reusing a deleted queue ID is about 1 in 2**15 (the number of different microsecond values that the system clock can distinguish within a second). 3) postsuper(1) deletes the new message, instead of the old message that it should have deleted. -h queue_id Put mail "on hold" so that no attempt is made to deliver it. Move one message with the named queue ID from the named mail queue(s) (default: incoming, active and deferred) to the hold queue. If a queue_id of - is specified, the program reads queue IDs from standard input. Specify "-h ALL" to hold all messages; for example, specify "-h ALL deferred" to hold all mail in the deferred queue. As a safety measure, the word ALL must be specified in upper case. Note: while mail is "on hold" it will not expire when its time in the queue exceeds the maximal_queue_lifetime or bounce_queue_lifetime setting. It becomes subject to expiration after it is released from "hold". This feature is available in Postfix 2.0 and later. -H queue_id Release mail that was put "on hold". Move one message with the named queue ID from the named mail queue(s) (default: hold) to the deferred queue. If a queue_id of - is specified, the program reads queue IDs from standard input. Note: specify "postsuper -r" to release mail that was kept on hold for a significant fraction of $maximal_queue_lifetime or $bounce_queue_lifetime, or longer. Specify "-H ALL" to release all mail that is "on hold". As a safety measure, the word ALL must be specified in upper case. This feature is available in Postfix 2.0 and later. -p Purge old temporary files that are left over after system or software crashes. -r queue_id Requeue the message with the named queue ID from the named mail queue(s) (default: hold, incoming, active and deferred). To requeue multiple messages, specify multiple -r command-line options. Alternatively, if a queue_id of - is specified, the program reads queue IDs from standard input. Specify "-r ALL" to requeue all messages. As a safety measure, the word ALL must be specified in upper case. A requeued message is moved to the maildrop queue, from where it is copied by the pickup(8) and cleanup(8) daemons to a new queue file. In many respects its handling differs from that of a new local submission. * The message is not subjected to the smtpd_milters or non_smtpd_milters settings. When mail has passed through an external content filter, this would produce incorrect results with Milter applications that depend on original SMTP connection state information. * The message is subjected again to mail address rewriting and substitution. This is useful when rewriting rules or virtual mappings have changed. The address rewriting context (local or remote) is the same as when the message was received. * The message is subjected to the same content_filter settings (if any) as used for new local mail submissions. This is useful when content_filter settings have changed. Warning: Postfix queue IDs are reused (always with Postfix <= 2.8; and with Postfix >= 2.9 when enable_long_queue_ids=no). There is a very small possibility that postsuper(1) requeues the wrong message file when it is executed while the Postfix mail system is running, but no harm should be done. This feature is available in Postfix 1.1 and later. -s Structure check and structure repair. This should be done once before Postfix startup. * Rename files whose name does not match the message file inode number. This operation is necessary after restoring a mail queue from a different machine or from backup, when queue files were created with Postfix <= 2.8 or with "enable_long_queue_ids = no". * Move queue files that are in the wrong place in the file system hierarchy and remove subdirectories that are no longer needed. File position rearrangements are necessary after a change in the hash_queue_names and/or hash_queue_depth configuration parameters. * Rename queue files created with "enable_long_queue_ids = yes" to short names, for migration to Postfix <= 2.8. The procedure is as follows: # postfix stop # postconf enable_long_queue_ids=no # postsuper Run postsuper(1) repeatedly until it stops reporting file name changes. -S A redundant version of -s that requires that long file names also match the message file inode number. This option exists for testing purposes, and is available with Postfix 2.9 and later. -v Enable verbose logging for debugging purposes. Multiple -v options make the software increasingly verbose.
DIAGNOSTICS
Problems are reported to the standard error stream and to syslogd(8). postsuper(1) reports the number of messages deleted with -d, the number of messages requeued with -r, and the number of messages whose queue file name was fixed with -s. The report is written to the standard error stream and to syslogd(8).
ENVIRONMENT
MAIL_CONFIG
Directory with the main.cf file.
BUGS
Mail that is not sanitized by Postfix (i.e. mail in the maildrop queue) cannot be placed "on hold".
CONFIGURATION PARAMETERS
The following main.cf parameters are especially relevant to this program. The text below provides only a parameter summary. See postconf(5) for more details including examples. config_directory (see 'postconf -d' output) The default location of the Postfix main.cf and master.cf configuration files. hash_queue_depth (1) The number of subdirectory levels for queue directories listed with the hash_queue_names parameter. hash_queue_names (deferred, defer) The names of queue directories that are split across multiple subdirectory levels. queue_directory (see 'postconf -d' output) The location of the Postfix top-level queue directory. syslog_facility (mail) The syslog facility of Postfix logging. syslog_name (see 'postconf -d' output) The mail system name that is prepended to the process name in syslog records, so that "smtpd" becomes, for example, "postfix/smtpd". Available in Postfix version 2.9 and later: enable_long_queue_ids (no) Enable long, non-repeating, queue IDs (queue file names).
SEE ALSO
sendmail(1), Sendmail-compatible user interface postqueue(1), unprivileged queue operations
LICENSE
The Secure Mailer license must be distributed with this software.
AUTHOR(S)
Wietse Venema
IBM T.J. Watson Research
P.O. Box 704
Yorktown Heights, NY 10598, USA
Wietse Venema
Google, Inc.
111 8th Avenue
New York, NY 10011, USA
POSTSUPER(1)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
