nmblookup(1)
NAME
nmblookup - NetBIOS over TCP/IP client used to lookup NetBIOS names
SYNOPSIS
nmblookup [-M|--master-browser] [-R|--recursion] [-S|--status]
[-r|--root-port] [-A|--lookup-by-ip]
[-B|--broadcast <broadcast address>] [-U|--unicast <unicast address>]
[-d <debug level>] [-s <smb config file>] [-i <NetBIOS scope>]
[-T|--translate] [-f|--flags] {name}
DESCRIPTION
This tool is part of the samba(7) suite. nmblookup is used to query NetBIOS names and map them to IP addresses in a network using NetBIOS over TCP/IP queries. The options allow the name queries to be directed at a particular IP broadcast area or to a particular machine. All queries are done over UDP.
OPTIONS
-M|--master-browser
Searches for a master browser by looking up the NetBIOS name with a
type of 0x1d. If
name is "-" then it does a lookup on the special name
__MSBROWSE__. Please note that in order to use the name "-", you
need to make sure "-" isn't parsed as an argument, e.g. use :
nmblookup -M -- -.
-R|--recursion
Set the recursion desired bit in the packet to do a recursive
lookup. This is used when sending a name query to a machine running
a WINS server and the user wishes to query the names in the WINS
server. If this bit is unset the normal (broadcast responding)
NetBIOS processing code on a machine is used instead. See RFC1001,
RFC1002 for details.
-S|--status
Once the name query has returned an IP address then do a node
status query as well. A node status query returns the NetBIOS names
registered by a host.
-r|--root-port
Try and bind to UDP port 137 to send and receive UDP datagrams. The
reason for this option is a bug in Windows 95 where it ignores the
source port of the requesting packet and only replies to UDP port
137. Unfortunately, on most UNIX systems root privilege is needed
to bind to this port, and in addition, if the nmbd(8) daemon is
running on this machine it also binds to this port.
-A|--lookup-by-ip
Interpret name as an IP Address and do a node status query on this
address.
-n|--netbiosname <primary NetBIOS name>
This option allows you to override the NetBIOS name that Samba uses
for itself. This is identical to setting the netbios name parameter
in the smb.conf file. However, a command line setting will take
precedence over settings in smb.conf.
-i|--scope <scope>
This specifies a NetBIOS scope that nmblookup will use to
communicate with when generating NetBIOS names. For details on the
use of NetBIOS scopes, see rfc1001.txt and rfc1002.txt. NetBIOS
scopes are very rarely used, only set this parameter if you are the
system administrator in charge of all the NetBIOS systems you
communicate with.
-W|--workgroup=domain
Set the SMB domain of the username. This overrides the default
domain which is the domain defined in smb.conf. If the domain
specified is the same as the servers NetBIOS name, it causes the
client to log on using the servers local SAM (as opposed to the
Domain SAM).
-O|--socket-options socket options
TCP socket options to set on the client socket. See the socket
options parameter in the smb.conf manual page for the list of valid
options.
-?|--help
Print a summary of command line options.
--usage
Display brief usage message.
-B|--broadcast <broadcast address>
Send the query to the given broadcast address. Without this option
the default behavior of nmblookup is to send the query to the
broadcast address of the network interfaces as either auto-detected
or defined in the interfaces parameter of the smb.conf(5) file.
-U|--unicast <unicast address>
Do a unicast query to the specified address or host unicast
address. This option (along with the -R option) is needed to query
a WINS server.
-d|--debuglevel=level
level is an integer from 0 to 10. The default value if this
parameter is not specified is 0.
The higher this value, the more detail will be logged to the log
files about the activities of the server. At level 0, only critical
errors and serious warnings will be logged. Level 1 is a reasonable
level for day-to-day running - it generates a small amount of
information about operations carried out.
Levels above 1 will generate considerable amounts of log data, and
should only be used when investigating a problem. Levels above 3
are designed for use only by developers and generate HUGE amounts
of log data, most of which is extremely cryptic.
Note that specifying this parameter here will override the log
level parameter in the smb.conf file.
-V|--version
Prints the program version number.
-s|--configfile=<configuration file>
The file specified contains the configuration details required by
the server. The information in this file includes server-specific
information such as what printcap file to use, as well as
descriptions of all the services that the server is to provide. See
smb.conf for more information. The default configuration file name
is determined at compile time.
-l|--log-basename=logdirectory
Base directory name for log/debug files. The extension ".progname"
will be appended (e.g. log.smbclient, log.smbd, etc...). The log
file is never removed by the client.
--option=<name>=<value>
Set the smb.conf(5) option "<name>" to value "<value>" from the
command line. This overrides compiled-in defaults and options read
from the configuration file.
-T|--translate
This causes any IP addresses found in the lookup to be looked up
via a reverse DNS lookup into a DNS name, and printed out before
each
IP address .... NetBIOS name
pair that is the normal output.
-f|--flags
Show which flags apply to the name that has been looked up.
Possible answers are zero or more of: Response, Authoritative,
Truncated, Recursion_Desired, Recursion_Available, Broadcast.
name
This is the NetBIOS name being queried. Depending upon the previous
options this may be a NetBIOS name or IP address. If a NetBIOS name
then the different name types may be specified by appending
'#<type>' to the name. This name may also be '*', which will return
all registered names within a broadcast area.
EXAMPLES
nmblookup can be used to query a WINS server (in the same way nslookup is used to query DNS servers). To query a WINS server, nmblookup must be called like this: nmblookup -U server -R 'name' For example, running : nmblookup -U samba.org -R 'IRIX#1B' would query the WINS server samba.org for the domain master browser (1B name type) for the IRIX workgroup.
VERSION
This man page is correct for version 3 of the Samba suite.
SEE ALSO
nmbd(8), samba(7), and smb.conf(5).
AUTHOR
The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed. The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another excellent piece of Open Source software, available at ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
