mount(2)
NAME
mount - mount filesystem
SYNOPSIS
#include <sys/mount.h>
int mount(const char *source, const char *target,
const char *filesystemtype, unsigned long mountflags,
const void *data);
DESCRIPTION
mount() attaches the filesystem specified by source (which is often a pathname referring to a device, but can also be the pathname of a directory or file, or a dummy string) to the location (a directory or file) specified by the pathname in target. Appropriate privilege (Linux: the CAP_SYS_ADMIN capability) is required to mount filesystems. Values for the filesystemtype argument supported by the kernel are listed in /proc/filesystems (e.g., "btrfs", "ext4", "jfs", "xfs", "vfat", "fuse", "tmpfs", "cgroup", "proc", "mqueue", "nfs", "cifs", "iso9660"). Further types may become available when the appropriate modules are loaded. The data argument is interpreted by the different filesystems. Typically it is a string of comma-separated options understood by this filesystem. See mount(8) for details of the options available for each filesystem type. A call to mount() performs one of a number of general types of operation, depending on the bits specified in mountflags. The choice of which operation to perform is determined by testing the bits set in mountflags, with the tests being conducted in the order listed here: * Remount an existing mount: mountflags includes MS_REMOUNT. * Create a bind mount: mountflags includes MS_BIND. * Change the propagation type of an existing mount: mountflags includes one of MS_SHARED, MS_PRIVATE, MS_SLAVE, or MS_UNBINDABLE. * Move an existing mount to a new location: mountflags includes MS_MOVE. * Create a new mount: mountflags includes none of the above flags. Each of these operations is detailed later in this page. Further flags may be specified in mountflags to modify the behavior of mount(), as described below. Additional mount flags The list below describes the additional flags that can be specified in mountflags. Note that some operation types ignore some or all of these flags, as described later in this page. MS_DIRSYNC (since Linux 2.5.19) Make directory changes on this filesystem synchronous. (This property can be obtained for individual directories or subtrees using chattr(1).) MS_LAZYTIME (since Linux 4.0) Reduce on-disk updates of inode timestamps (atime, mtime, ctime) by maintaining these changes only in memory. The on-disk timestamps are updated only when: (a) the inode needs to be updated for some change unrelated to file timestamps; (b) the application employs fsync(2), syncfs(2), or sync(2); (c) an undeleted inode is evicted from memory; or (d) more than 24 hours have passed since the inode was written to disk. This mount option significantly reduces writes needed to update the inode's timestamps, especially mtime and atime. However, in the event of a system crash, the atime and mtime fields on disk might be out of date by up to 24 hours. Examples of workloads where this option could be of significant benefit include frequent random writes to preallocated files, as well as cases where the MS_STRICTATIME mount option is also enabled. (The advantage of combining MS_STRICTATIME and MS_LAZYTIME is that stat(2) will return the correctly updated atime, but the atime updates will be flushed to disk only in the cases listed above.) MS_MANDLOCK Permit mandatory locking on files in this filesystem. (Mandatory locking must still be enabled on a per-file basis, as described in fcntl(2).) Since Linux 4.5, this mount option requires the CAP_SYS_ADMIN capability. MS_NOATIME Do not update access times for (all types of) files on this filesystem. MS_NODEV Do not allow access to devices (special files) on this filesystem. MS_NODIRATIME Do not update access times for directories on this filesystem. This flag provides a subset of the functionality provided by MS_NOATIME; that is, MS_NOATIME implies MS_NODIRATIME. MS_NOEXEC Do not allow programs to be executed from this filesystem. MS_NOSUID Do not honor set-user-ID and set-group-ID bits or file capabilities when executing programs from this filesystem. MS_RDONLY Mount filesystem read-only. MS_REC (since Linux 2.4.11) Used in conjunction with MS_BIND to create a recursive bind mount, and in conjunction with the propagation type flags to recursively change the propagation type of all of the mounts in a subtree. See below for further details. MS_RELATIME (since Linux 2.6.20) When a file on this filesystem is accessed, update the file's last access time (atime) only if the current value of atime is less than or equal to the file's last modification time (mtime) or last status change time (ctime). This option is useful for programs, such as mutt(1), that need to know when a file has been read since it was last modified. Since Linux 2.6.30, the kernel defaults to the behavior provided by this flag (unless MS_NOATIME was specified), and the MS_STRICTATIME flag is required to obtain traditional semantics. In addition, since Linux 2.6.30, the file's last access time is always updated if it is more than 1 day old. MS_SILENT (since Linux 2.6.17) Suppress the display of certain (printk()) warning messages in the kernel log. This flag supersedes the misnamed and obsolete MS_VERBOSE flag (available since Linux 2.4.12), which has the same meaning. MS_STRICTATIME (since Linux 2.6.30) Always update the last access time (atime) when files on this filesystem are accessed. (This was the default behavior before Linux 2.6.30.) Specifying this flag overrides the effect of setting the MS_NOATIME and MS_RELATIME flags. MS_SYNCHRONOUS Make writes on this filesystem synchronous (as though the O_SYNC flag to open(2) was specified for all file opens to this filesystem). From Linux 2.4 onward, the MS_NODEV, MS_NOEXEC, and MS_NOSUID flags are settable on a per-mount-point basis. From kernel 2.6.16 onward, MS_NOATIME and MS_NODIRATIME are also settable on a per-mount-point basis. The MS_RELATIME flag is also settable on a per-mount-point basis. Remounting an existing mount An existing mount may be remounted by specifying MS_REMOUNT in mountflags. This allows you to change the mountflags and data of an existing mount without having to unmount and remount the filesystem. target should be the same value specified in the initial mount() call. The source and filesystemtype arguments are ignored. The mountflags and data arguments should match the values used in the original mount() call, except for those parameters that are being deliberately changed. The following mountflags can be changed: MS_LAZYTIME, MS_MANDLOCK, MS_NOATIME, MS_NODEV, MS_NODIRATIME, MS_NOEXEC, MS_NOSUID, MS_RELATIME, MS_RDONLY, and MS_SYNCHRONOUS. Attempts to change the setting of the MS_DIRSYNC flag during a remount are silently ignored. Since Linux 3.17, if none of MS_NOATIME, MS_NODIRATIME, MS_RELATIME, or MS_STRICTATIME is specified in mountflags, then the remount operation preserves the existing values of these flags (rather than defaulting to MS_RELATIME). Since Linux 2.6.26, this flag can also be used to make an existing bind mount read-only by specifying mountflags as: MS_REMOUNT | MS_BIND | MS_RDONLY Note that only the MS_RDONLY setting of the bind mount can be changed in this manner. Creating a bind mount If mountflags includes MS_BIND (available since Linux 2.4), then perform a bind mount. A bind mount makes a file or a directory subtree visible at another point within the single directory hierarchy. Bind mounts may cross filesystem boundaries and span chroot(2) jails. The filesystemtype and data arguments are ignored. The remaining bits in the mountflags argument are also ignored, with the exception of MS_REC. (The bind mount has the same mount options as the underlying mount point.) However, see the discussion of remounting above, for a method of making an existing bind mount read-only. By default, when a directory is bind mounted, only that directory is mounted; if there are any submounts under the directory tree, they are not bind mounted. If the MS_REC flag is also specified, then a recursive bind mount operation is performed: all submounts under the source subtree (other than unbindable mounts) are also bind mounted at the corresponding location in the target subtree. Changing the propagation type of an existing mount If mountflags includes one of MS_SHARED, MS_PRIVATE, MS_SLAVE, or MS_UNBINDABLE (all available since Linux 2.6.15), then the propagation type of an existing mount is changed. If more than one of these flags is specified, an error results. The only flags that can be used with changing the propagation type are MS_REC and MS_SILENT. The source, filesystemtype, and data arguments are ignored. The meanings of the propagation type flags are as follows: MS_SHARED Make this mount point shared. Mount and unmount events immediately under this mount point will propagate to the other mount points that are members of this mount's peer group. Propagation here means that the same mount or unmount will automatically occur under all of the other mount points in the peer group. Conversely, mount and unmount events that take place under peer mount points will propagate to this mount point. MS_PRIVATE Make this mount point private. Mount and unmount events do not propagate into or out of this mount point. This is the default propagation type for newly created mount points. MS_SLAVE If this is a shared mount point that is a member of a peer group that contains other members, convert it to a slave mount. If this is a shared mount point that is a member of a peer group that contains no other members, convert it to a private mount. Otherwise, the propagation type of the mount point is left unchanged. When a mount point is a slave, mount and unmount events propagate into this mount point from the (master) shared peer group of which it was formerly a member. Mount and unmount events under this mount point do not propagate to any peer. A mount point can be the slave of another peer group while at the same time sharing mount and unmount events with a peer group of which it is a member. MS_UNBINDABLE Make this mount unbindable. This is like a private mount, and in addition this mount can't be bind mounted. When a recursive bind mount (mount() with the MS_BIND and MS_REC flags) is performed on a directory subtree, any bind mounts within the subtree are automatically pruned (i.e., not replicated) when replicating that subtree to produce the target subtree. By default, changing the propagation type affects only the target mount point. If the MS_REC flag is also specified in mountflags, then the propagation type of all mount points under target is also changed. For further details regarding mount propagation types, see mount_namespaces(7). Moving a mount If mountflags contains the flag MS_MOVE (available since Linux 2.4.18), then move a subtree: source specifies an existing mount point and target specifies the new location to which that mount point is to be relocated. The move is atomic: at no point is the subtree unmounted. The remaining bits in the mountflags argument are ignored, as are the filesystemtype and data arguments. Creating a new mount point If none of MS_REMOUNT, MS_BIND, MS_MOVE, MS_SHARED, MS_PRIVATE, MS_SLAVE, or MS_UNBINDABLE is specified in mountflags, then mount() performs its default action: creating a new mount point. source specifies the source for the new mount point, and target specifies the directory at which to create the mount point. The filesystemtype and data arguments are employed, and further bits may be specified in mountflags to modify the behavior of the call.
RETURN VALUE
On success, zero is returned. On error, -1 is returned, and errno is set appropriately.
ERRORS
The error values given below result from filesystem type independent
errors. Each filesystem type may have its own special errors and its
own special behavior. See the Linux kernel source code for details.
EACCES A component of a path was not searchable. (See also
path_resolution(7).)
EACCES Mounting a read-only filesystem was attempted without giving the
MS_RDONLY flag.
EACCES The block device source is located on a filesystem mounted with
the MS_NODEV option.
EBUSY source is already mounted.
EBUSY source cannot be remounted read-only, because it still holds
files open for writing.
EBUSY source cannot be mounted on target because target is still busy
(it is the working directory of some thread, the mount point of
another device, has open files, etc.).
EFAULT One of the pointer arguments points outside the user address
space.
EINVAL source had an invalid superblock.
EINVAL A remount operation (MS_REMOUNT) was attempted, but source was
not already mounted on target.
EINVAL A move operation (MS_MOVE) was attempted, but source was not a
mount point, or was '/'.
EINVAL mountflags includes more than one of MS_SHARED, MS_PRIVATE,
MS_SLAVE, or MS_UNBINDABLE.
EINVAL mountflags includes MS_SHARED, MS_PRIVATE, MS_SLAVE, or
MS_UNBINDABLE and also includes a flag other than MS_REC or
MS_SILENT.
EINVAL An attempt was made to bind mount an unbindable mount.
ELOOP Too many links encountered during pathname resolution.
ELOOP A move operation was attempted, and target is a descendant of
source.
EMFILE (In case no block device is required:) Table of dummy devices is
full.
ENAMETOOLONG
A pathname was longer than MAXPATHLEN.
ENODEV filesystemtype not configured in the kernel.
ENOENT A pathname was empty or had a nonexistent component.
ENOMEM The kernel could not allocate a free page to copy filenames or
data into.
ENOTBLK
source is not a block device (and a device was required).
ENOTDIR
target, or a prefix of source, is not a directory.
ENXIO The major number of the block device source is out of range.
EPERM The caller does not have the required privileges.
VERSIONS
The definitions of MS_DIRSYNC, MS_MOVE, MS_PRIVATE, MS_REC, MS_RELATIME, MS_SHARED, MS_SLAVE, MS_STRICTATIME and MS_UNBINDABLE were added to glibc headers in version 2.12.
CONFORMING TO
This function is Linux-specific and should not be used in programs intended to be portable.
NOTES
Since Linux 2.4 a single filesystem can be mounted at multiple mount points, and multiple mounts can be stacked on the same mount point. The mountflags argument may have the magic number 0xC0ED (MS_MGC_VAL) in the top 16 bits. (All of the other flags discussed in DESCRIPTION occupy the low order 16 bits of mountflags.) Specifying MS_MGC_VAL was required in kernel versions prior to 2.4, but since Linux 2.4 is no longer required and is ignored if specified. The original MS_SYNC flag was renamed MS_SYNCHRONOUS in 1.1.69 when a different MS_SYNC was added to <mman.h>. Before Linux 2.4 an attempt to execute a set-user-ID or set-group-ID program on a filesystem mounted with MS_NOSUID would fail with EPERM. Since Linux 2.4 the set-user-ID and set-group-ID bits are just silently ignored in this case. Per-process namespaces Starting with kernel 2.4.19, Linux provides per-process mount namespaces. A mount namespace is the set of filesystem mounts that are visible to a process. Mount-point namespaces can be (and usually are) shared between multiple processes, and changes to the namespace (i.e., mounts and unmounts) by one process are visible to all other processes sharing the same namespace. (The pre-2.4.19 Linux situation can be considered as one in which a single namespace was shared by every process on the system.) A child process created by fork(2) shares its parent's mount namespace; the mount namespace is preserved across an execve(2). A process can obtain a private mount namespace if: it was created using the clone(2) CLONE_NEWNS flag, in which case its new namespace is initialized to be a copy of the namespace of the process that called clone(2); or it calls unshare(2) with the CLONE_NEWNS flag, which causes the caller's mount namespace to obtain a private copy of the namespace that it was previously sharing with other processes, so that future mounts and unmounts by the caller are invisible to other processes (except child processes that the caller subsequently creates) and vice versa. The Linux-specific /proc/[pid]/mounts file exposes the list of mount points in the mount namespace of the process with the specified ID; see proc(5) for details.
SEE ALSO
mountpoint(1), umount(2), mount_namespaces(7), path_resolution(7), findmnt(8), lsblk(8), mount(8), umount(8)
COLOPHON
This page is part of release 4.09 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
