git-show(1)
NAME
git-show - Show various types of objects
SYNOPSIS
git show [options] <object>...
DESCRIPTION
Shows one or more objects (blobs, trees, tags and commits). For commits it shows the log message and textual diff. It also presents the merge commit in a special format as produced by git diff-tree --cc. For tags, it shows the tag message and the referenced objects. For trees, it shows the names (equivalent to git ls-tree with --name-only). For plain blobs, it shows the plain contents. The command takes options applicable to the git diff-tree command to control how the changes the commit introduces are shown. This manual page describes only the most frequently used options.
OPTIONS
<object>...
The names of objects to show. For a more complete list of ways to
spell object names, see "SPECIFYING REVISIONS" section in
gitrevisions(7).
--pretty[=<format>], --format=<format>
Pretty-print the contents of the commit logs in a given format,
where <format> can be one of oneline, short, medium, full, fuller,
email, raw, format:<string> and tformat:<string>. When <format> is
none of the above, and has %placeholder in it, it acts as if
--pretty=tformat:<format> were given.
See the "PRETTY FORMATS" section for some additional details for
each format. When =<format> part is omitted, it defaults to medium.
Note: you can specify the default pretty format in the repository
configuration (see git-config(1)).
--abbrev-commit
Instead of showing the full 40-byte hexadecimal commit object name,
show only a partial prefix. Non default number of digits can be
specified with "--abbrev=<n>" (which also modifies diff output, if
it is displayed).
This should make "--pretty=oneline" a whole lot more readable for
people using 80-column terminals.
--no-abbrev-commit
Show the full 40-byte hexadecimal commit object name. This negates
--abbrev-commit and those options which imply it such as
"--oneline". It also overrides the log.abbrevCommit variable.
--oneline
This is a shorthand for "--pretty=oneline --abbrev-commit" used
together.
--encoding=<encoding>
The commit objects record the encoding used for the log message in
their encoding header; this option can be used to tell the command
to re-code the commit log message in the encoding preferred by the
user. For non plumbing commands this defaults to UTF-8. Note that
if an object claims to be encoded in X and we are outputting in X,
we will output the object verbatim; this means that invalid
sequences in the original commit may be copied to the output.
--expand-tabs=<n>, --expand-tabs, --no-expand-tabs
Perform a tab expansion (replace each tab with enough spaces to
fill to the next display column that is multiple of <n>) in the log
message before showing it in the output. --expand-tabs is a
short-hand for --expand-tabs=8, and --no-expand-tabs is a
short-hand for --expand-tabs=0, which disables tab expansion.
By default, tabs are expanded in pretty formats that indent the log
message by 4 spaces (i.e. medium, which is the default, full, and
fuller).
--notes[=<treeish>]
Show the notes (see git-notes(1)) that annotate the commit, when
showing the commit log message. This is the default for git log,
git show and git whatchanged commands when there is no --pretty,
--format, or --oneline option given on the command line.
By default, the notes shown are from the notes refs listed in the
core.notesRef and notes.displayRef variables (or corresponding
environment overrides). See git-config(1) for more details.
With an optional <treeish> argument, use the treeish to find the
notes to display. The treeish can specify the full refname when it
begins with refs/notes/; when it begins with notes/, refs/ and
otherwise refs/notes/ is prefixed to form a full name of the ref.
Multiple --notes options can be combined to control which notes are
being displayed. Examples: "--notes=foo" will show only notes from
"refs/notes/foo"; "--notes=foo --notes" will show both notes from
"refs/notes/foo" and from the default notes ref(s).
--no-notes
Do not show notes. This negates the above --notes option, by
resetting the list of notes refs from which notes are shown.
Options are parsed in the order given on the command line, so e.g.
"--notes --notes=foo --no-notes --notes=bar" will only show notes
from "refs/notes/bar".
--show-notes[=<treeish>], --[no-]standard-notes
These options are deprecated. Use the above --notes/--no-notes
options instead.
--show-signature
Check the validity of a signed commit object by passing the
signature to gpg --verify and show the output.
PRETTY FORMATS
If the commit is a merge, and if the pretty-format is not oneline,
email or raw, an additional line is inserted before the Author: line.
This line begins with "Merge: " and the sha1s of ancestral commits are
printed, separated by spaces. Note that the listed commits may not
necessarily be the list of the direct parent commits if you have
limited your view of history: for example, if you are only interested
in changes related to a certain directory or file.
There are several built-in formats, and you can define additional
formats by setting a pretty.<name> config option to either another
format name, or a format: string, as described below (see git-
config(1)). Here are the details of the built-in formats:
* oneline
<sha1> <title line>
This is designed to be as compact as possible.
* short
commit <sha1>
Author: <author>
<title line>
* medium
commit <sha1>
Author: <author>
Date: <author date>
<title line>
<full commit message>
* full
commit <sha1>
Author: <author>
Commit: <committer>
<title line>
<full commit message>
* fuller
commit <sha1>
Author: <author>
AuthorDate: <author date>
Commit: <committer>
CommitDate: <committer date>
<title line>
<full commit message>
* email
From <sha1> <date>
From: <author>
Date: <author date>
Subject: [PATCH] <title line>
<full commit message>
* raw
The raw format shows the entire commit exactly as stored in the
commit object. Notably, the SHA-1s are displayed in full,
regardless of whether --abbrev or --no-abbrev are used, and parents
information show the true parent commits, without taking grafts or
history simplification into account. Note that this format affects
the way commits are displayed, but not the way the diff is shown
e.g. with git log --raw. To get full object names in a raw diff
format, use --no-abbrev.
* format:<string>
The format:<string> format allows you to specify which information
you want to show. It works a little bit like printf format, with
the notable exception that you get a newline with %n instead of \n.
E.g, format:"The author of %h was %an, %ar%nThe title was >>%s<<%n"
would show something like this:
The author of fe6e0ee was Junio C Hamano, 23 hours ago
The title was >>t4119: test autocomputing -p<n> for traditional diff input.<<
The placeholders are:
* %H: commit hash
* %h: abbreviated commit hash
* %T: tree hash
* %t: abbreviated tree hash
* %P: parent hashes
* %p: abbreviated parent hashes
* %an: author name
* %aN: author name (respecting .mailmap, see git-shortlog(1) or
git-blame(1))
* %ae: author email
* %aE: author email (respecting .mailmap, see git-shortlog(1) or
git-blame(1))
* %ad: author date (format respects --date= option)
* %aD: author date, RFC2822 style
* %ar: author date, relative
* %at: author date, UNIX timestamp
* %ai: author date, ISO 8601-like format
* %aI: author date, strict ISO 8601 format
* %cn: committer name
* %cN: committer name (respecting .mailmap, see git-shortlog(1)
or git-blame(1))
* %ce: committer email
* %cE: committer email (respecting .mailmap, see git-shortlog(1)
or git-blame(1))
* %cd: committer date (format respects --date= option)
* %cD: committer date, RFC2822 style
* %cr: committer date, relative
* %ct: committer date, UNIX timestamp
* %ci: committer date, ISO 8601-like format
* %cI: committer date, strict ISO 8601 format
* %d: ref names, like the --decorate option of git-log(1)
* %D: ref names without the " (", ")" wrapping.
* %e: encoding
* %s: subject
* %f: sanitized subject line, suitable for a filename
* %b: body
* %B: raw body (unwrapped subject and body)
* %N: commit notes
* %GG: raw verification message from GPG for a signed commit
* %G?: show "G" for a good (valid) signature, "B" for a bad
signature, "U" for a good signature with unknown validity and
"N" for no signature
* %GS: show the name of the signer for a signed commit
* %GK: show the key used to sign a signed commit
* %gD: reflog selector, e.g., refs/stash@{1} or refs/stash@{2
minutes ago}; the format follows the rules described for the -g
option. The portion before the @ is the refname as given on the
command line (so git log -g refs/heads/master would yield
refs/heads/master@{0}).
* %gd: shortened reflog selector; same as %gD, but the refname
portion is shortened for human readability (so
refs/heads/master becomes just master).
* %gn: reflog identity name
* %gN: reflog identity name (respecting .mailmap, see git-
shortlog(1) or git-blame(1))
* %ge: reflog identity email
* %gE: reflog identity email (respecting .mailmap, see git-
shortlog(1) or git-blame(1))
* %gs: reflog subject
* %Cred: switch color to red
* %Cgreen: switch color to green
* %Cblue: switch color to blue
* %Creset: reset color
* %C(...): color specification, as described under Values in the
"CONFIGURATION FILE" section of git-config(1); adding auto, at
the beginning will emit color only when colors are enabled for
log output (by color.diff, color.ui, or --color, and respecting
the auto settings of the former if we are going to a terminal).
auto alone (i.e. %C(auto)) will turn on auto coloring on the
next placeholders until the color is switched again.
* %m: left (<), right (>) or boundary (-) mark
* %n: newline
* %%: a raw %
* %x00: print a byte from a hex code
* %w([<w>[,<i1>[,<i2>]]]): switch line wrapping, like the -w
option of git-shortlog(1).
* %<(<N>[,trunc|ltrunc|mtrunc]): make the next placeholder take
at least N columns, padding spaces on the right if necessary.
Optionally truncate at the beginning (ltrunc), the middle
(mtrunc) or the end (trunc) if the output is longer than N
columns. Note that truncating only works correctly with N >= 2.
* %<|(<N>): make the next placeholder take at least until Nth
columns, padding spaces on the right if necessary
* %>(<N>), %>|(<N>): similar to %<(<N>), %<|(<N>) respectively,
but padding spaces on the left
* %>>(<N>), %>>|(<N>): similar to %>(<N>), %>|(<N>) respectively,
except that if the next placeholder takes more spaces than
given and there are spaces on its left, use those spaces
* %><(<N>), %><|(<N>): similar to % <(<N>), %<|(<N>)
respectively, but padding both sides (i.e. the text is
centered)
Note
Some placeholders may depend on other options given to the revision
traversal engine. For example, the %g* reflog options will insert
an empty string unless we are traversing reflog entries (e.g., by
git log -g). The %d and %D placeholders will use the "short"
decoration format if --decorate was not already provided on the
command line.
If you add a + (plus sign) after % of a placeholder, a line-feed is
inserted immediately before the expansion if and only if the
placeholder expands to a non-empty string.
If you add a - (minus sign) after % of a placeholder, line-feeds that
immediately precede the expansion are deleted if and only if the
placeholder expands to an empty string.
If you add a ` ` (space) after % of a placeholder, a space is inserted
immediately before the expansion if and only if the placeholder expands
to a non-empty string.
* tformat:
The tformat: format works exactly like format:, except that it
provides "terminator" semantics instead of "separator" semantics.
In other words, each commit has the message terminator character
(usually a newline) appended, rather than a separator placed
between entries. This means that the final entry of a single-line
format will be properly terminated with a new line, just as the
"oneline" format does. For example:
$ git log -2 --pretty=format:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973 -- NO NEWLINE
$ git log -2 --pretty=tformat:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973
In addition, any unrecognized string that has a % in it is
interpreted as if it has tformat: in front of it. For example,
these two are equivalent:
$ git log -2 --pretty=tformat:%h 4da45bef
$ git log -2 --pretty=%h 4da45bef
COMMON DIFF OPTIONS
-p, -u, --patch
Generate patch (see section on generating patches).
-s, --no-patch
Suppress diff output. Useful for commands like git show that show
the patch by default, or to cancel the effect of --patch.
-U<n>, --unified=<n>
Generate diffs with <n> lines of context instead of the usual
three. Implies -p.
--raw
For each commit, show a summary of changes using the raw diff
format. See the "RAW OUTPUT FORMAT" section of git-diff(1). This is
different from showing the log itself in raw format, which you can
achieve with --format=raw.
--patch-with-raw
Synonym for -p --raw.
--compaction-heuristic, --no-compaction-heuristic
These are to help debugging and tuning an experimental heuristic
(which is off by default) that shifts the hunk boundary in an
attempt to make the resulting patch easier to read.
--minimal
Spend extra time to make sure the smallest possible diff is
produced.
--patience
Generate a diff using the "patience diff" algorithm.
--histogram
Generate a diff using the "histogram diff" algorithm.
--diff-algorithm={patience|minimal|histogram|myers}
Choose a diff algorithm. The variants are as follows:
default, myers
The basic greedy diff algorithm. Currently, this is the
default.
minimal
Spend extra time to make sure the smallest possible diff is
produced.
patience
Use "patience diff" algorithm when generating patches.
histogram
This algorithm extends the patience algorithm to "support
low-occurrence common elements".
For instance, if you configured diff.algorithm variable to a
non-default value and want to use the default one, then you have to
use --diff-algorithm=default option.
--stat[=<width>[,<name-width>[,<count>]]]
Generate a diffstat. By default, as much space as necessary will be
used for the filename part, and the rest for the graph part.
Maximum width defaults to terminal width, or 80 columns if not
connected to a terminal, and can be overridden by <width>. The
width of the filename part can be limited by giving another width
<name-width> after a comma. The width of the graph part can be
limited by using --stat-graph-width=<width> (affects all commands
generating a stat graph) or by setting diff.statGraphWidth=<width>
(does not affect git format-patch). By giving a third parameter
<count>, you can limit the output to the first <count> lines,
followed by ... if there are more.
These parameters can also be set individually with
--stat-width=<width>, --stat-name-width=<name-width> and
--stat-count=<count>.
--numstat
Similar to --stat, but shows number of added and deleted lines in
decimal notation and pathname without abbreviation, to make it more
machine friendly. For binary files, outputs two - instead of saying
0 0.
--shortstat
Output only the last line of the --stat format containing total
number of modified files, as well as number of added and deleted
lines.
--dirstat[=<param1,param2,...>]
Output the distribution of relative amount of changes for each
sub-directory. The behavior of --dirstat can be customized by
passing it a comma separated list of parameters. The defaults are
controlled by the diff.dirstat configuration variable (see git-
config(1)). The following parameters are available:
changes
Compute the dirstat numbers by counting the lines that have
been removed from the source, or added to the destination. This
ignores the amount of pure code movements within a file. In
other words, rearranging lines in a file is not counted as much
as other changes. This is the default behavior when no
parameter is given.
lines
Compute the dirstat numbers by doing the regular line-based
diff analysis, and summing the removed/added line counts. (For
binary files, count 64-byte chunks instead, since binary files
have no natural concept of lines). This is a more expensive
--dirstat behavior than the changes behavior, but it does count
rearranged lines within a file as much as other changes. The
resulting output is consistent with what you get from the other
--*stat options.
files
Compute the dirstat numbers by counting the number of files
changed. Each changed file counts equally in the dirstat
analysis. This is the computationally cheapest --dirstat
behavior, since it does not have to look at the file contents
at all.
cumulative
Count changes in a child directory for the parent directory as
well. Note that when using cumulative, the sum of the
percentages reported may exceed 100%. The default
(non-cumulative) behavior can be specified with the
noncumulative parameter.
<limit>
An integer parameter specifies a cut-off percent (3% by
default). Directories contributing less than this percentage of
the changes are not shown in the output.
Example: The following will count changed files, while ignoring
directories with less than 10% of the total amount of changed
files, and accumulating child directory counts in the parent
directories: --dirstat=files,10,cumulative.
--summary
Output a condensed summary of extended header information such as
creations, renames and mode changes.
--patch-with-stat
Synonym for -p --stat.
-z
Separate the commits with NULs instead of with new newlines.
Also, when --raw or --numstat has been given, do not munge
pathnames and use NULs as output field terminators.
Without this option, each pathname output will have TAB, LF, double
quotes, and backslash characters replaced with \t, \n, \", and \\,
respectively, and the pathname will be enclosed in double quotes if
any of those replacements occurred.
--name-only
Show only names of changed files.
--name-status
Show only names and status of changed files. See the description of
the --diff-filter option on what the status letters mean.
--submodule[=<format>]
Specify how differences in submodules are shown. When --submodule
or --submodule=log is given, the log format is used. This format
lists the commits in the range like git-submodule(1) summary does.
Omitting the --submodule option or specifying --submodule=short,
uses the short format. This format just shows the names of the
commits at the beginning and end of the range. Can be tweaked via
the diff.submodule configuration variable.
--color[=<when>]
Show colored diff. --color (i.e. without =<when>) is the same as
--color=always. <when> can be one of always, never, or auto.
--no-color
Turn off colored diff. It is the same as --color=never.
--word-diff[=<mode>]
Show a word diff, using the <mode> to delimit changed words. By
default, words are delimited by whitespace; see --word-diff-regex
below. The <mode> defaults to plain, and must be one of:
color
Highlight changed words using only colors. Implies --color.
plain
Show words as [-removed-] and {+added+}. Makes no attempts to
escape the delimiters if they appear in the input, so the
output may be ambiguous.
porcelain
Use a special line-based format intended for script
consumption. Added/removed/unchanged runs are printed in the
usual unified diff format, starting with a +/-/` ` character at
the beginning of the line and extending to the end of the line.
Newlines in the input are represented by a tilde ~ on a line of
its own.
none
Disable word diff again.
Note that despite the name of the first mode, color is used to
highlight the changed parts in all modes if enabled.
--word-diff-regex=<regex>
Use <regex> to decide what a word is, instead of considering runs
of non-whitespace to be a word. Also implies --word-diff unless it
was already enabled.
Every non-overlapping match of the <regex> is considered a word.
Anything between these matches is considered whitespace and
ignored(!) for the purposes of finding differences. You may want to
append |[^[:space:]] to your regular expression to make sure that
it matches all non-whitespace characters. A match that contains a
newline is silently truncated(!) at the newline.
For example, --word-diff-regex=. will treat each character as a
word and, correspondingly, show differences character by character.
The regex can also be set via a diff driver or configuration
option, see gitattributes(5) or git-config(1). Giving it explicitly
overrides any diff driver or configuration setting. Diff drivers
override configuration settings.
--color-words[=<regex>]
Equivalent to --word-diff=color plus (if a regex was specified)
--word-diff-regex=<regex>.
--no-renames
Turn off rename detection, even when the configuration file gives
the default to do so.
--check
Warn if changes introduce conflict markers or whitespace errors.
What are considered whitespace errors is controlled by
core.whitespace configuration. By default, trailing whitespaces
(including lines that solely consist of whitespaces) and a space
character that is immediately followed by a tab character inside
the initial indent of the line are considered whitespace errors.
Exits with non-zero status if problems are found. Not compatible
with --exit-code.
--ws-error-highlight=<kind>
Highlight whitespace errors on lines specified by <kind> in the
color specified by color.diff.whitespace. <kind> is a comma
separated list of old, new, context. When this option is not given,
only whitespace errors in new lines are highlighted. E.g.
--ws-error-highlight=new,old highlights whitespace errors on both
deleted and added lines. all can be used as a short-hand for
old,new,context.
--full-index
Instead of the first handful of characters, show the full pre- and
post-image blob object names on the "index" line when generating
patch format output.
--binary
In addition to --full-index, output a binary diff that can be
applied with git-apply.
--abbrev[=<n>]
Instead of showing the full 40-byte hexadecimal object name in
diff-raw format output and diff-tree header lines, show only a
partial prefix. This is independent of the --full-index option
above, which controls the diff-patch output format. Non default
number of digits can be specified with --abbrev=<n>.
-B[<n>][/<m>], --break-rewrites[=[<n>][/<m>]]
Break complete rewrite changes into pairs of delete and create.
This serves two purposes:
It affects the way a change that amounts to a total rewrite of a
file not as a series of deletion and insertion mixed together with
a very few lines that happen to match textually as the context, but
as a single deletion of everything old followed by a single
insertion of everything new, and the number m controls this aspect
of the -B option (defaults to 60%). -B/70% specifies that less
than 30% of the original should remain in the result for Git to
consider it a total rewrite (i.e. otherwise the resulting patch
will be a series of deletion and insertion mixed together with
context lines).
When used with -M, a totally-rewritten file is also considered as
the source of a rename (usually -M only considers a file that
disappeared as the source of a rename), and the number n controls
this aspect of the -B option (defaults to 50%). -B20% specifies
that a change with addition and deletion compared to 20% or more of
the file's size are eligible for being picked up as a possible
source of a rename to another file.
-M[<n>], --find-renames[=<n>]
If generating diffs, detect and report renames for each commit. For
following files across renames while traversing history, see
--follow. If n is specified, it is a threshold on the similarity
index (i.e. amount of addition/deletions compared to the file's
size). For example, -M90% means Git should consider a delete/add
pair to be a rename if more than 90% of the file hasn't changed.
Without a % sign, the number is to be read as a fraction, with a
decimal point before it. I.e., -M5 becomes 0.5, and is thus the
same as -M50%. Similarly, -M05 is the same as -M5%. To limit
detection to exact renames, use -M100%. The default similarity
index is 50%.
-C[<n>], --find-copies[=<n>]
Detect copies as well as renames. See also --find-copies-harder. If
n is specified, it has the same meaning as for -M<n>.
--find-copies-harder
For performance reasons, by default, -C option finds copies only if
the original file of the copy was modified in the same changeset.
This flag makes the command inspect unmodified files as candidates
for the source of copy. This is a very expensive operation for
large projects, so use it with caution. Giving more than one -C
option has the same effect.
-D, --irreversible-delete
Omit the preimage for deletes, i.e. print only the header but not
the diff between the preimage and /dev/null. The resulting patch is
not meant to be applied with patch or git apply; this is solely for
people who want to just concentrate on reviewing the text after the
change. In addition, the output obviously lack enough information
to apply such a patch in reverse, even manually, hence the name of
the option.
When used together with -B, omit also the preimage in the deletion
part of a delete/create pair.
-l<num>
The -M and -C options require O(n^2) processing time where n is the
number of potential rename/copy targets. This option prevents
rename/copy detection from running if the number of rename/copy
targets exceeds the specified number.
--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]
Select only files that are Added (A), Copied (C), Deleted (D),
Modified (M), Renamed (R), have their type (i.e. regular file,
symlink, submodule, ...) changed (T), are Unmerged (U), are Unknown
(X), or have had their pairing Broken (B). Any combination of the
filter characters (including none) can be used. When *
(All-or-none) is added to the combination, all paths are selected
if there is any file that matches other criteria in the comparison;
if there is no file that matches other criteria, nothing is
selected.
Also, these upper-case letters can be downcased to exclude. E.g.
--diff-filter=ad excludes added and deleted paths.
-S<string>
Look for differences that change the number of occurrences of the
specified string (i.e. addition/deletion) in a file. Intended for
the scripter's use.
It is useful when you're looking for an exact block of code (like a
struct), and want to know the history of that block since it first
came into being: use the feature iteratively to feed the
interesting block in the preimage back into -S, and keep going
until you get the very first version of the block.
-G<regex>
Look for differences whose patch text contains added/removed lines
that match <regex>.
To illustrate the difference between -S<regex> --pickaxe-regex and
-G<regex>, consider a commit with the following diff in the same
file:
+ return !regexec(regexp, two->ptr, 1, ®match, 0);
...
- hit = !regexec(regexp, mf2.ptr, 1, ®match, 0);
While git log -G"regexec\(regexp" will show this commit, git log
-S"regexec\(regexp" --pickaxe-regex will not (because the number of
occurrences of that string did not change).
See the pickaxe entry in gitdiffcore(7) for more information.
--pickaxe-all
When -S or -G finds a change, show all the changes in that
changeset, not just the files that contain the change in <string>.
--pickaxe-regex
Treat the <string> given to -S as an extended POSIX regular
expression to match.
-O<orderfile>
Output the patch in the order specified in the <orderfile>, which
has one shell glob pattern per line. This overrides the
diff.orderFile configuration variable (see git-config(1)). To
cancel diff.orderFile, use -O/dev/null.
-R
Swap two inputs; that is, show differences from index or on-disk
file to tree contents.
--relative[=<path>]
When run from a subdirectory of the project, it can be told to
exclude changes outside the directory and show pathnames relative
to it with this option. When you are not in a subdirectory (e.g. in
a bare repository), you can name which subdirectory to make the
output relative to by giving a <path> as an argument.
-a, --text
Treat all files as text.
--ignore-space-at-eol
Ignore changes in whitespace at EOL.
-b, --ignore-space-change
Ignore changes in amount of whitespace. This ignores whitespace at
line end, and considers all other sequences of one or more
whitespace characters to be equivalent.
-w, --ignore-all-space
Ignore whitespace when comparing lines. This ignores differences
even if one line has whitespace where the other line has none.
--ignore-blank-lines
Ignore changes whose lines are all blank.
--inter-hunk-context=<lines>
Show the context between diff hunks, up to the specified number of
lines, thereby fusing hunks that are close to each other.
-W, --function-context
Show whole surrounding functions of changes.
--ext-diff
Allow an external diff helper to be executed. If you set an
external diff driver with gitattributes(5), you need to use this
option with git-log(1) and friends.
--no-ext-diff
Disallow external diff drivers.
--textconv, --no-textconv
Allow (or disallow) external text conversion filters to be run when
comparing binary files. See gitattributes(5) for details. Because
textconv filters are typically a one-way conversion, the resulting
diff is suitable for human consumption, but cannot be applied. For
this reason, textconv filters are enabled by default only for git-
diff(1) and git-log(1), but not for git-format-patch(1) or diff
plumbing commands.
--ignore-submodules[=<when>]
Ignore changes to submodules in the diff generation. <when> can be
either "none", "untracked", "dirty" or "all", which is the default.
Using "none" will consider the submodule modified when it either
contains untracked or modified files or its HEAD differs from the
commit recorded in the superproject and can be used to override any
settings of the ignore option in git-config(1) or gitmodules(5).
When "untracked" is used submodules are not considered dirty when
they only contain untracked content (but they are still scanned for
modified content). Using "dirty" ignores all changes to the work
tree of submodules, only changes to the commits stored in the
superproject are shown (this was the behavior until 1.7.0). Using
"all" hides all changes to submodules.
--src-prefix=<prefix>
Show the given source prefix instead of "a/".
--dst-prefix=<prefix>
Show the given destination prefix instead of "b/".
--no-prefix
Do not show any source or destination prefix.
For more detailed explanation on these common options, see also
gitdiffcore(7).
GENERATING PATCHES WITH -P
When "git-diff-index", "git-diff-tree", or "git-diff-files" are run
with a -p option, "git diff" without the --raw option, or "git log"
with the "-p" option, they do not produce the output described above;
instead they produce a patch file. You can customize the creation of
such patches via the GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS
environment variables.
What the -p option produces is slightly different from the traditional
diff format:
1. It is preceded with a "git diff" header that looks like this:
diff --git a/file1 b/file2
The a/ and b/ filenames are the same unless rename/copy is
involved. Especially, even for a creation or a deletion, /dev/null
is not used in place of the a/ or b/ filenames.
When rename/copy is involved, file1 and file2 show the name of the
source file of the rename/copy and the name of the file that
rename/copy produces, respectively.
2. It is followed by one or more extended header lines:
old mode <mode>
new mode <mode>
deleted file mode <mode>
new file mode <mode>
copy from <path>
copy to <path>
rename from <path>
rename to <path>
similarity index <number>
dissimilarity index <number>
index <hash>..<hash> <mode>
File modes are printed as 6-digit octal numbers including the file
type and file permission bits.
Path names in extended headers do not include the a/ and b/
prefixes.
The similarity index is the percentage of unchanged lines, and the
dissimilarity index is the percentage of changed lines. It is a
rounded down integer, followed by a percent sign. The similarity
index value of 100% is thus reserved for two equal files, while
100% dissimilarity means that no line from the old file made it
into the new one.
The index line includes the SHA-1 checksum before and after the
change. The <mode> is included if the file mode does not change;
otherwise, separate lines indicate the old and the new mode.
3. TAB, LF, double quote and backslash characters in pathnames are
represented as \t, \n, \" and \\, respectively. If there is need
for such substitution then the whole pathname is put in double
quotes.
4. All the file1 files in the output refer to files before the commit,
and all the file2 files refer to files after the commit. It is
incorrect to apply each change to each file sequentially. For
example, this patch will swap a and b:
diff --git a/a b/b
rename from a
rename to b
diff --git a/b b/a
rename from b
rename to a
COMBINED DIFF FORMAT
Any diff-generating command can take the -c or --cc option to produce a combined diff when showing a merge. This is the default format when showing merges with git-diff(1) or git-show(1). Note also that you can give the -m option to any of these commands to force generation of diffs with individual parents of a merge. A combined diff format looks like this: diff --combined describe.c index fabadb8,cc95eb0..4866510 --- a/describe.c +++ b/describe.c @@@ -98,20 -98,12 +98,20 @@@ return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1; } - static void describe(char *arg) -static void describe(struct commit *cmit, int last_one) ++static void describe(char *arg, int last_one) { + unsigned char sha1[20]; + struct commit *cmit; struct commit_list *list; static int initialized = 0; struct commit_name *n; + if (get_sha1(arg, sha1) < 0) + usage(describe_usage); + cmit = lookup_commit_reference(sha1); + if (!cmit) + usage(describe_usage); + if (!initialized) { initialized = 1; for_each_ref(get_name); 1. It is preceded with a "git diff" header, that looks like this (when -c option is used): diff --combined file or like this (when --cc option is used): diff --cc file 2. It is followed by one or more extended header lines (this example shows a merge with two parents): index <hash>,<hash>..<hash> mode <mode>,<mode>..<mode> new file mode <mode> deleted file mode <mode>,<mode> The mode <mode>,<mode>..<mode> line appears only if at least one of the <mode> is different from the rest. Extended headers with information about detected contents movement (renames and copying detection) are designed to work with diff of two <tree-ish> and are not used by combined diff format. 3. It is followed by two-line from-file/to-file header --- a/file +++ b/file Similar to two-line header for traditional unified diff format, /dev/null is used to signal created or deleted files. 4. Chunk header format is modified to prevent people from accidentally feeding it to patch -p1. Combined diff format was created for review of merge commit changes, and was not meant for apply. The change is similar to the change in the extended index header: @@@ <from-file-range> <from-file-range> <to-file-range> @@@ There are (number of parents + 1) @ characters in the chunk header for combined diff format. Unlike the traditional unified diff format, which shows two files A and B with a single column that has - (minus --- appears in A but removed in B), + (plus --- missing in A but added to B), or " " (space --- unchanged) prefix, this format compares two or more files file1, file2,... with one file X, and shows how X differs from each of fileN. One column for each of fileN is prepended to the output line to note how X's line is different from it. A - character in the column N means that the line appears in fileN but it does not appear in the result. A + character in the column N means that the line appears in the result, and fileN does not have that line (in other words, the line was added, from the point of view of that parent). In the above example output, the function signature was changed from both files (hence two - removals from both file1 and file2, plus ++ to mean one line that was added does not appear in either file1 or file2). Also eight other lines are the same from file1 but do not appear in file2 (hence prefixed with +). When shown by git diff-tree -c, it compares the parents of a merge commit with the merge result (i.e. file1..fileN are the parents). When shown by git diff-files -c, it compares the two unresolved merge parents with the working tree file (i.e. file1 is stage 2 aka "our version", file2 is stage 3 aka "their version").
EXAMPLES
git show v1.0.0
Shows the tag v1.0.0, along with the object the tags points at.
git show v1.0.0^{tree}
Shows the tree pointed to by the tag v1.0.0.
git show -s --format=%s v1.0.0^{commit}
Shows the subject of the commit pointed to by the tag v1.0.0.
git show next~10:Documentation/README
Shows the contents of the file Documentation/README as they were
current in the 10th last commit of the branch next.
git show master:Makefile master:t/Makefile
Concatenates the contents of said Makefiles in the head of the
branch master.
DISCUSSION
Git is to some extent character encoding agnostic.
* The contents of the blob objects are uninterpreted sequences of
bytes. There is no encoding translation at the core level.
* Path names are encoded in UTF-8 normalization form C. This applies
to tree objects, the index file, ref names, as well as path names
in command line arguments, environment variables and config files
(.git/config (see git-config(1)), gitignore(5), gitattributes(5)
and gitmodules(5)).
Note that Git at the core level treats path names simply as
sequences of non-NUL bytes, there are no path name encoding
conversions (except on Mac and Windows). Therefore, using non-ASCII
path names will mostly work even on platforms and file systems that
use legacy extended ASCII encodings. However, repositories created
on such systems will not work properly on UTF-8-based systems (e.g.
Linux, Mac, Windows) and vice versa. Additionally, many Git-based
tools simply assume path names to be UTF-8 and will fail to display
other encodings correctly.
* Commit log messages are typically encoded in UTF-8, but other
extended ASCII encodings are also supported. This includes
ISO-8859-x, CP125x and many others, but not UTF-16/32, EBCDIC and
CJK multi-byte encodings (GBK, Shift-JIS, Big5, EUC-x, CP9xx etc.).
Although we encourage that the commit log messages are encoded in
UTF-8, both the core and Git Porcelain are designed not to force UTF-8
on projects. If all participants of a particular project find it more
convenient to use legacy encodings, Git does not forbid it. However,
there are a few things to keep in mind.
1. git commit and git commit-tree issues a warning if the commit log
message given to it does not look like a valid UTF-8 string, unless
you explicitly say your project uses a legacy encoding. The way to
say this is to have i18n.commitencoding in .git/config file, like
this:
[i18n]
commitencoding = ISO-8859-1
Commit objects created with the above setting record the value of
i18n.commitencoding in its encoding header. This is to help other
people who look at them later. Lack of this header implies that the
commit log message is encoded in UTF-8.
2. git log, git show, git blame and friends look at the encoding
header of a commit object, and try to re-code the log message into
UTF-8 unless otherwise specified. You can specify the desired
output encoding with i18n.logoutputencoding in .git/config file,
like this:
[i18n]
logoutputencoding = ISO-8859-1
If you do not have this configuration variable, the value of
i18n.commitencoding is used instead.
Note that we deliberately chose not to re-code the commit log message
when a commit is made to force UTF-8 at the commit object level,
because re-coding to UTF-8 is not necessarily a reversible operation.
GIT
Part of the git(1) suite
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
