git-interpret-trailers(1)
NAME
git-interpret-trailers - help add structured information into commit messages
SYNOPSIS
git interpret-trailers [--in-place] [--trim-empty] [(--trailer <token>[(=|:)<value>])...] [<file>...]
DESCRIPTION
Help adding trailers lines, that look similar to RFC 822 e-mail
headers, at the end of the otherwise free-form part of a commit
message.
This command reads some patches or commit messages from either the
<file> arguments or the standard input if no <file> is specified. Then
this command applies the arguments passed using the --trailer option,
if any, to the commit message part of each input file. The result is
emitted on the standard output.
Some configuration variables control the way the --trailer arguments
are applied to each commit message and the way any existing trailer in
the commit message is changed. They also make it possible to
automatically add some trailers.
By default, a <token>=<value> or <token>:<value> argument given using
--trailer will be appended after the existing trailers only if the last
trailer has a different (<token>, <value>) pair (or if there is no
existing trailer). The <token> and <value> parts will be trimmed to
remove starting and trailing whitespace, and the resulting trimmed
<token> and <value> will appear in the message like this:
token: value
This means that the trimmed <token> and <value> will be separated by ':
' (one colon followed by one space).
By default the new trailer will appear at the end of all the existing
trailers. If there is no existing trailer, the new trailer will appear
after the commit message part of the output, and, if there is no line
with only spaces at the end of the commit message part, one blank line
will be added before the new trailer.
Existing trailers are extracted from the input message by looking for a
group of one or more lines that contain a colon (by default), where the
group is preceded by one or more empty (or whitespace-only) lines. The
group must either be at the end of the message or be the last
non-whitespace lines before a line that starts with ---. Such three
minus signs start the patch part of the message.
When reading trailers, there can be whitespaces before and after the
token, the separator and the value. There can also be whitespaces
inside the token and the value.
Note that trailers do not follow and are not intended to follow many
rules for RFC 822 headers. For example they do not follow the line
folding rules, the encoding rules and probably many other rules.
OPTIONS
--in-place
Edit the files in place.
--trim-empty
If the <value> part of any trailer contains only whitespace, the
whole trailer will be removed from the resulting message. This
applies to existing trailers as well as new trailers.
--trailer <token>[(=|:)<value>]
Specify a (<token>, <value>) pair that should be applied as a
trailer to the input messages. See the description of this command.
CONFIGURATION VARIABLES
trailer.separators
This option tells which characters are recognized as trailer
separators. By default only : is recognized as a trailer separator,
except that = is always accepted on the command line for
compatibility with other git commands.
The first character given by this option will be the default
character used when another separator is not specified in the
config for this trailer.
For example, if the value for this option is "%=$", then only lines
using the format <token><sep><value> with <sep> containing %, = or
$ and then spaces will be considered trailers. And % will be the
default separator used, so by default trailers will appear like:
<token>% <value> (one percent sign and one space will appear
between the token and the value).
trailer.where
This option tells where a new trailer will be added.
This can be end, which is the default, start, after or before.
If it is end, then each new trailer will appear at the end of the
existing trailers.
If it is start, then each new trailer will appear at the start,
instead of the end, of the existing trailers.
If it is after, then each new trailer will appear just after the
last trailer with the same <token>.
If it is before, then each new trailer will appear just before the
first trailer with the same <token>.
trailer.ifexists
This option makes it possible to choose what action will be
performed when there is already at least one trailer with the same
<token> in the message.
The valid values for this option are: addIfDifferentNeighbor (this
is the default), addIfDifferent, add, overwrite or doNothing.
With addIfDifferentNeighbor, a new trailer will be added only if no
trailer with the same (<token>, <value>) pair is above or below the
line where the new trailer will be added.
With addIfDifferent, a new trailer will be added only if no trailer
with the same (<token>, <value>) pair is already in the message.
With add, a new trailer will be added, even if some trailers with
the same (<token>, <value>) pair are already in the message.
With replace, an existing trailer with the same <token> will be
deleted and the new trailer will be added. The deleted trailer will
be the closest one (with the same <token>) to the place where the
new one will be added.
With doNothing, nothing will be done; that is no new trailer will
be added if there is already one with the same <token> in the
message.
trailer.ifmissing
This option makes it possible to choose what action will be
performed when there is not yet any trailer with the same <token>
in the message.
The valid values for this option are: add (this is the default) and
doNothing.
With add, a new trailer will be added.
With doNothing, nothing will be done.
trailer.<token>.key
This key will be used instead of <token> in the trailer. At the end
of this key, a separator can appear and then some space characters.
By default the only valid separator is :, but this can be changed
using the trailer.separators config variable.
If there is a separator, then the key will be used instead of both
the <token> and the default separator when adding the trailer.
trailer.<token>.where
This option takes the same values as the trailer.where
configuration variable and it overrides what is specified by that
option for trailers with the specified <token>.
trailer.<token>.ifexist
This option takes the same values as the trailer.ifexist
configuration variable and it overrides what is specified by that
option for trailers with the specified <token>.
trailer.<token>.ifmissing
This option takes the same values as the trailer.ifmissing
configuration variable and it overrides what is specified by that
option for trailers with the specified <token>.
trailer.<token>.command
This option can be used to specify a shell command that will be
called to automatically add or modify a trailer with the specified
<token>.
When this option is specified, the behavior is as if a special
<token>=<value> argument were added at the beginning of the command
line, where <value> is taken to be the standard output of the
specified command with any leading and trailing whitespace trimmed
off.
If the command contains the $ARG string, this string will be
replaced with the <value> part of an existing trailer with the same
<token>, if any, before the command is launched.
If some <token>=<value> arguments are also passed on the command
line, when a trailer.<token>.command is configured, the command
will also be executed for each of these arguments. And the <value>
part of these arguments, if any, will be used to replace the $ARG
string in the command.
EXAMPLES
* Configure a sign trailer with a Signed-off-by key, and then add two
of these trailers to a message:
$ git config trailer.sign.key "Signed-off-by"
$ cat msg.txt
subject
message
$ cat msg.txt | git interpret-trailers --trailer 'sign: Alice <alice@example.com>' --trailer 'sign: Bob <bob@example.com>'
subject
message
Signed-off-by: Alice <alice@example.com>
Signed-off-by: Bob <bob@example.com>
* Use the --in-place option to edit a message file in place:
$ cat msg.txt
subject
message
Signed-off-by: Bob <bob@example.com>
$ git interpret-trailers --trailer 'Acked-by: Alice <alice@example.com>' --in-place msg.txt
$ cat msg.txt
subject
message
Signed-off-by: Bob <bob@example.com>
Acked-by: Alice <alice@example.com>
* Extract the last commit as a patch, and add a Cc and a Reviewed-by
trailer to it:
$ git format-patch -1
0001-foo.patch
$ git interpret-trailers --trailer 'Cc: Alice <alice@example.com>' --trailer 'Reviewed-by: Bob <bob@example.com>' 0001-foo.patch >0001-bar.patch
* Configure a sign trailer with a command to automatically add a
'Signed-off-by: ' with the author information only if there is no
'Signed-off-by: ' already, and show how it works:
$ git config trailer.sign.key "Signed-off-by: "
$ git config trailer.sign.ifmissing add
$ git config trailer.sign.ifexists doNothing
$ git config trailer.sign.command 'echo "$(git config user.name) <$(git config user.email)>"'
$ git interpret-trailers <<EOF
> EOF
Signed-off-by: Bob <bob@example.com>
$ git interpret-trailers <<EOF
> Signed-off-by: Alice <alice@example.com>
> EOF
Signed-off-by: Alice <alice@example.com>
* Configure a fix trailer with a key that contains a # and no space
after this character, and show how it works:
$ git config trailer.separators ":#"
$ git config trailer.fix.key "Fix #"
$ echo "subject" | git interpret-trailers --trailer fix=42
subject
Fix #42
* Configure a see trailer with a command to show the subject of a
commit that is related, and show how it works:
$ git config trailer.see.key "See-also: "
$ git config trailer.see.ifExists "replace"
$ git config trailer.see.ifMissing "doNothing"
$ git config trailer.see.command "git log -1 --oneline --format=\"%h (%s)\" --abbrev-commit --abbrev=14 \$ARG"
$ git interpret-trailers <<EOF
> subject
>
> message
>
> see: HEAD~2
> EOF
subject
message
See-also: fe3187489d69c4 (subject of related commit)
* Configure a commit template with some trailers with empty values
(using sed to show and keep the trailing spaces at the end of the
trailers), then configure a commit-msg hook that uses git
interpret-trailers to remove trailers with empty values and to add
a git-version trailer:
$ sed -e 's/ Z$/ /' >commit_template.txt <<EOF
> ***subject***
>
> ***message***
>
> Fixes: Z
> Cc: Z
> Reviewed-by: Z
> Signed-off-by: Z
> EOF
$ git config commit.template commit_template.txt
$ cat >.git/hooks/commit-msg <<EOF
> #!/bin/sh
> git interpret-trailers --trim-empty --trailer "git-version: \$(git describe)" "\$1" > "\$1.new"
> mv "\$1.new" "\$1"
> EOF
$ chmod +x .git/hooks/commit-msg
SEE ALSO
git-commit(1), git-format-patch(1), git-config(1)
GIT
Part of the git(1) suite
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
