fig2dev(1)
NAME
fig2dev - translates Fig code to various graphics languages
SYNOPSIS
fig2dev -L language [-m mag] [-s fsize] [-Z maxdimension]
[-D +/-rangelist [-K]] [other options] [fig-file
[out-file]]
DESCRIPTION
fig2dev translates fig code in the named fig-file into the specified graphics language and puts them in out-file. The default fig-file and out-file are standard input and standard output, respectively Xfig (Facility for Interactive Generation of figures) is a screen- oriented tool which runs under the X Window System, and allows the user to draw and manipulate objects interactively. This version of fig2dev is compatible with xfig versions 1.3, 1.4, 2.0, 2.1, 3.0, 3.1 and 3.2. Xfig version 3.2.3 and later saves and allows the user to edit comments for each Fig object. These comments are output with several of the output languages, such as PostScript, CGM, EMF, LaTeX, MetaFont, PicTeX, (as % comments), tk (as # comments), and pic (as .\" comments).
GENERAL OPTIONS (all drivers)
-L language
Set the output graphics language. Valid languages are box, cgm,
dxf, epic, eepic, eepicemu, emf, eps, gbx (Gerber beta driver),
gif, ibmgl, jpeg, latex, map (HTML image map), mf (MetaFont), mp
(MetaPost), mmp (Multi-MetaPost), pcx, pdf, pdftex, pdftex_t,
pic, pict2e, pictex, png, ppm, ps, pstex, pstex_t, pstricks, ptk
(Perl/tk), shape (LaTeX shaped paragraphs), sld (AutoCad slide
format), svg (beta driver), textyl, tiff, tikz, tk (tcl/tk),
tpic, xbm and xpm.
Notes:
dvips and xdvi must be compiled with the tpic support (-DTPIC)
for epic, eepic and tpic to work.
You must have ghostscript and ps2pdf, which comes with the
ghostscript distribution to get the pdf output and the bitmap
formats (png, jpeg, etc.), and the netpbm (pbmplus) package to
get gif, xbm, xpm, and sld output.
-h Print help message with all options for all output languages
then exit.
-V Print the program version number and exit.
-D +/-rangelist
With +rangelist, keep only those depths in the list. With
-rangelist, keep all depths except those in the list. The
rangelist may be a list of comma-separated numbers or ranges
separated by colon (:). For example, -D +10,40,55:70,80 means
keep only layers 10, 40, 55 through 70, and 80.
-K The selection of the depths with the -D +/-rangelist option does
normally not affect the calculation of the bounding box. Thus
the generated document might have a much larger bounding box
than necessary. If -K is given then the bounding box is adjusted
to include only those objects in the selected depths.
-G minor[:major][:unit]
Draws a grid on the page. Specify thin, or thin and thick line
spacing in one of several units. For example, -G .25:1cm draws
a thin, gray line every .25 cm and a thicker gray line every 1
cm. Specifying -G 1in draws a thin line every 1 inch.
Fractions may be used, e.g. -G 1/16:1/2in will draw a thin line
every 1/16 inch (0.0625 inch) and a thick line every 1/2 inch.
Allowable units are: i, in, inch, f, ft, feet, c, cm, mm, and m.
Only allowed for PostScript, EPS, PDF, and bitmap (GIF, JPEG,
etc) drivers for now.
-j Enable the I18N internationalization facility.
-m mag Set the magnification at which the figure is rendered to mag.
The default is 1.0. This may not be used with the maxdimension
option (-Z).
-s fsize
Set the default font size (in points, 1/72 inch) for text
objects to fsize. The default is 11*mag, and thus is scaled by
the -m option. If there is no scaling, the default font is
eleven point Roman.
-Z maxdimension
Scale the figure so that the maximum dimension (width or height)
is maxdimension inches or cm, depending on whether the figure
was saved with imperial or metric units. This may not be used
with the magnification option (-m).
other options
The other options are specific to the choice of graphics
language, as described below.
OPTIONS COMMON TO ALL BITMAP FORMATS
-b borderwidth
Make blank border around figure of width borderwidth.
-F Use correct font sizes (points, 1/72 inch) instead of the
traditional size that xfig/fig2dev uses, which is 1/80 inch.
The corresponding xfig command-line option is
-correct_font_size.
-g color
Use color for the background.
-N Convert all colors to grayscale.
-S smoothfactor
This will smooth the output by passing smoothfactor to
ghostscript in the -dTextAlphaBits and -dGraphicsAlphaBits
options to improve font rendering and graphic smoothing. A
value of 2 for smoothfactor provides some smoothing and 4
provides more.
GIF OPTIONS
-t color
Use color for the transparent color in the GIF file. This must
be specified in the same format that ppmmake(1) allows. It may
allow an X11 color name, but at least you may use a six-digit
hexadecimal RGBvalue using the # sign, e.g. #ff0000 (Red).
JPEG OPTIONS
-q image_quality
use the integer value image_quality for the JPEG "Quality"
factor. Valid values are 0 - 100, with the default being 75.
CGM OPTIONS
CGM is Computer Graphics Metafile, developed by ISO and ANSI and is a
vector-based plus bitmap language. Microsoft WORD, PowerPoint and
probably other products can import this format and display it on the
screen, something that they won't do with EPS files that have an ASCII
preview.
-b dummyarg
Generate binary output (dummy argument required after the -b).
-r Position arrowheads for CGM viewers that display rounded
arrowheads. Normally, arrowheads are pointed, so fig2dev
compensates for this by moving the endpoint of the line back so
the tip of the arrowhead ends where the original endpoint of the
line was. If the -r option is used, the position of arrows will
NOT be corrected for compensating line width effects, because
the rounded arrowhead doesn't extend beyond the endpoint of the
line.
DXF OPTIONS
DXF is the Drawing Interchange File Format. The output to DXF is
experimental.
-a Select ANSI A paper size instead of the default ISO A4.
-d xll,yll,xur,yur
Restrict plotting to a rectangular area of the plotter paper
which has a lower left hand corner at (xll,yll) and a upper
right hand corner at (xur,yur). All four numbers are in inches
and follow -d in a comma-separated list - xll,yll,xur,yur - with
no spaces between them.
-P Rotate the figure to portrait mode. The default is landscape
mode.
-v Plot the figure upside-down in portrait mode or backwards in
landscape mode.
EMF OPTIONS
EMF is Enhanced Metafile, developed by Microsoft and is a vector-based plus bitmap language. Microsoft WORD, PowerPoint and probably other products can import this format and display it on the screen, something that they won't do with EPS files that have an ASCII preview.
EPIC OPTIONS
EPIC is an enhancement to LaTeX picture drawing environment.
EEPIC is an extension to EPIC and LaTeX picture drawing environment
which uses tpic specials as a graphics mechanism. It was written by
Conrad Kwok of Division of Computer Science at University of
California, Davis. Conrad Kwok has also written the EEPIC driver of
fig2dev.
EEPIC-EMU is an EEPIC emulation package which does not use tpic
specials.
-A factor
Scale arrowheads by factor. The width and height of arrowheads
is divided by this factor. This is because EPIC arrowheads are
normally about double the size of TeX arrowheads.
-E num Set encoding for text translation (0 = none, 1 = ISO-8859-1, 2 =
ISO-8859-2).
-F Don't set the font face, series, and style; only set it's size
and the baselineskip. By default, fig2dev sets all 5 font
parameters when it puts some text. The disadvantage is that you
can't set the font from your LaTeX document. With this option
on, you can set the font from your LaTeX document.
If any of the pictures included in your LaTeX document has been
generated with -F, then all pictures must be generated with this
option.
-f font
Set the default font used for text objects to font, where font
is one of rm, bf, it, sf or tt. The default is rm.
-l lwidth
Use "\thicklines" when the width of the line is equal or wider
than lwidth. The default is 2.
-P Generate a complete LaTeX file. In other words, the output file
can be formatted without requiring any changes.
-R Allow rotated text. Rotated text will be set using the
\rotatebox command. So, you will need to include
"\usepackage{graphics}" in the preamble of your LaTeX document.
If this option is not set, then rotated text will be set
horizontally.
-S scale
Set the scale to which the figure is rendered. This option
automatically sets the magnification and fsize to scale/12 and
scale respectively.
-t stretch
Set the stretch factor of dashed lines to stretch. The default
is 30.
-v Include comments in the output file.
-W Enable variable line width. By default, only two line widths
are available: The normal line width ("\thinlines"), and thick
lines ("\thicklines"). See also the -l option above.
-w Disable variable line width. Only "\thicklines" and/or
"\thinlines" commands will be generated in the output file.
When variable line width option is enabled, the "\thinlines"
command is still used when the line width is less than
LineThick. One potential problem is that the width of
"\thinlines" is 0.4pt but the resolution of Fig is 1/80 inch
(approx. 1pt). If LineThick is set to 2, normal lines will be
drawn in 0.4pt wide lines but the next line width is already
2pt. One possible solution is to set LineThick to 1 and set the
width of those lines you want to be drawn in "\thinlines" to 0.
Due to this problem, variable line width is disabled by default
(-w).
IBM-GL (HP/GL) OPTIONS
IBM-GL (IBM Graphics Language) is compatible with HP-GL (Hewlett-
Packard Graphics Language).
-a Select ANSI A paper size instead of the default ISO A4.
-c Generate instructions for an IBM 6180 Color Plotter without an
IBM Graphics Enhancement Cartridge (IBM-GEC).
-d xll,yll,xur,yur
Restrict plotting to a rectangular area of the plotter paper
which has a lower left hand corner at (xll,yll) and a upper
right hand corner at (xur,yur). All four numbers are in inches
and follow -d in a comma-separated list - xll,yll,xur,yur - with
no spaces between them.
-f fontfile
Load text character specifications from the table in the file
fontfile. The table must have 36 entries - one for each font
plus a default. Each entry consists of 5 numbers which specify
the
1.) standard character set (0 - 4, 6 - 9, 30 - 39),
2.) alternate character set (0 - 4, 6 - 9, 30 - 39),
3.) character slant angle (degrees),
4.) character width scale factor and
5.) character height scale factor.
-k Precede output with PCL command to use HP/GL.
-l pattfile
Load area fill line patterns from the table in the pattfile
file. The table must have 21 entries - one for each of the area
fill patterns. Each entry consists of 5 numbers which specify
the
1.) pattern number (-1 - 6),
2.) pattern length (inches),
3.) fill type (1 - 5),
4.) fill spacing (inches) and
5.) fill angle (degrees).
-m mag,x0,y0
The magnification may appear as the first element in a comma
separated list - mag,x0,y0 - where the second and third
parameters specify an offset in inches.
-P Rotate the figure to portrait mode. The default is landscape
mode.
-p penfile
Load plotter pen specifications from the table in the penfile
file. The table must have 9 entries - one for each color plus a
default. Each entry consists of 2 numbers which specify the
1.) pen number (1 - 8) and
2.) pen thickness (millimeters).
-S speed
Set the pen speed to speed (centimeters/second).
-v Plot the figure upside-down in portrait mode or backwards in
landscape mode. This allows you to write on the top surface of
overhead transparencies without disturbing the plotter ink on
the bottom surface.
Fig2dev may be installed with either ANSI A or ISO A4 default paper
size. The -a option selects the alternate paper size. Fig2dev does
not fill closed splines. The IBM-GEC is required to fill other
polygons. Fig2dev may be installed for plotters with or without the
IBM-GEC. The -c option selects the alternate instruction set.
LATEX OPTIONS
-d dmag
Set a separate magnification for the length of line dashes to
dmag.
-E num Set encoding for latex text translation (0 = no translation, 1 =
ISO-8859-1, 2 = ISO-8859-2).
-F Don't set the font face, series, and style; only set it's size
and the baselineskip. By default, fig2dev sets all 5 font
parameters when it puts some text. The disadvantage is that you
can't set the font from your LaTeX document. With this option
on, you can set the font from your LaTeX document.
If any of the pictures included in your LaTeX document has been
generated with -F, then all pictures must be generated with this
option.
-f font
Set the default font used for text objects to font, where font
is one of rm, bf, it, sf or tt. The default is rm.
-l lwidth
Sets the threshold between LaTeX thin and thick lines to lwidth
pixels. LaTeX supports only two different line widths:
\thinlines and \thicklines. Lines of width greater than lwidth
pixels are drawn as \thicklines. Also affects the size of dots
in dotted line style. The default is 1.
-v Verbose mode.
LaTeX cannot accurately represent all the graphics objects which can be
described by Fig. For example, the possible slopes which lines may
have are limited. Some objects, such as spline curves, cannot be drawn
at all. Fig2latex chooses the closest possible line slope, and prints
error messages when objects cannot be drawn accurately.
MAP (HTML image map) OPTIONS
Xfig version 3.2.3 and later saves and allows the user to edit comments
for each Fig object. The fig2dev map output language will produce an
HTML image map using Fig objects that have href="some_html_reference"
in their comments. Any Fig object except compound objects may used for
this. Usually, besides generating the map file, you would also
generate a PNG file, which is the image to which the map refers.
For example, you may have an xfig drawing with an imported image that
has the comment href="go_here.html" and a box object with a comment
href="go_away.html". This will produce an image map file such the user
may click on the image and the browser will load the "go_here.html"
page, or click on the box and the browser will load the "go_away.html"
page.
After the map file is generated by fig2dev you will need to edit it to
fill out any additional information it may need.
-b borderwidth
Make blank border around figure of width borderwidth.
METAFONT OPTIONS
fig2dev scales the figure by 1/8 before generating METAFONT code. The
magnification can be further changed with the -m option or by giving
magnification options to mf.
In order to process the generated METAFONT code, the mfpic macros must
be installed where mf can find them. The mfpic macro package is
available at any CTAN cite under the subdirectory: graphics/mfpic
-C code
specifies the starting METAFONT font code. The default is 32.
-n name
specifies the name to use in the output file.
-p pen_magnification
specifies how much the line width should be magnified compared
to the original figure. The default is 1.
-t top specifies the top of the whole coordinate system. The default
is ypos.
-x xmin
specifies the minimum x coordinate value of the figure (inches).
The default is 0.
-y ymin
specifies the minimum y coordinate value of the figure (inches).
The default is 0.
-X xmax
specifies the maximum x coordinate value of the figure (inches).
The default is 8.
-Y ymax
specifies the maximum y coordinate value of the figure (inches).
The default is 8.
METAPOST OPTIONS
-i file
Include file content via \input-command.
-I file
Include file content as additional header.
-o Old mode (no latex).
-p number
Adds the line "prologues:=number" to the output.
PIC OPTIONS
-f font
Set the default font used for text objects to font, where font
is one of R (roman), B (bold), I (italic), H (sans serif) or C
(typewriter). The default is R.
-p ext Enables the use of certain PIC extensions which are known to
work with the groff package; compatibility with DWB PIC is
unknown. The extensions enabled by each option are:
arc Allow ARC_BOX i.e. use rounded corners
line Use the 'line_thickness' value
fill Allow ellipses to be filled
all Use all of the above
psfont Don't convert PostScript fonts generic type
(useful for files going to be Ditroff'ed for
and printed on PS printer). DWB-compatible.
allps Use all of the above (i.e. "all" + "psfont")
PICT2E OPTIONS
PICT2E is an enhancement to the LaTeX picture environment. It is
enabled by inserting "\usepackage{pict2e}" in the document preamble.
Depending on the content of the figure, it may be necessary to also
include "\usepackage{color}" and "\usepackage{graphics}". Figures
produced with the PICT2E driver can be processed with any LaTeX engine,
e.g., LaTeX + dvips, LaTeX + dvipdfm, pdflatex, xelatex, or ConTeX.
Pattern fills are not supported by the PICT2E output language. The
PICT2E driver renders patterns by filling the respective area with the
pen-color at 25% intensity, i.e., a 75% tint of the pen-color. The
PICT2E driver allows one to choose any font available to the LaTeX
engine, including PostScript fonts. Apart from patterns and, possibly,
text fonts, figures produced with PICT2E are identical to figures
produced with the PostScript driver.
-b borderwidth
Make blank border around figure of width borderwidth*(1/72)
inches.
-C num Do not emit a \color-command for the color number num. (0 =
black, 1 = blue, 2 = green - see the color chooser widget in
Xfig). By default, fig2dev does not issue a \color-command for
objects which have the color set to "Default" in xfig. With
this option, the "\color"-command is also omitted for objects
having the color num. The color of these objects, as well as of
those having the color set to "Default", is picked up from the
including LaTeX-document.
The option -C 0 is particularly useful. By default, xfig starts
with the color set to black. Then, fig2dev emits
"\color{black}" commands, and the color-package must be included
in the document preamble. For black text and black-and-white
drawings, this is superfluous.
-e Do not try to be compatible with epic/eepic. By default, you
can include "\usepackage{pict2e, epic, eepic}" (in this order!)
in the document preamble and mix LaTeX pictures using the
epic/eepic command set and pictures produced with the PICT2E
output language within one document. With this option on, epic
or eepic pictures can not be mixed with PICT2E-pictures.
By default, fig2dev avoids the use of the "\circle" and
"\oval"-commands, which are defined by epic, in lieu of the
"\circlearc"-command exclusive to pict2e. In addition, line
widths are not only set using "\linethickness", but also with
the eepic-command "
llinethickness" (if it is defined).
-E num Set encoding for text translation (0 = no translation, 1 =
ISO-8859-1, 2 = ISO-8859-2). For instance, to use utf8-encoded
text, first create a text object, then edit the text using the
edit-button in xfig. Convert the fig-file to pict2e with the
option -E 0 and include "\usepackage[utf8]{inputenc}" in the
LaTeX file (not necessary when using xelatex). In xfig, the
text typed in may not be displayed correctly, but the document
produced from the LaTeX file will show the same text as was
typed in.
-F Do not set the font family, series or shape. By default,
fig2dev sets the font family, series, shape, font size and
baselineskip. With this option on, the text font can be set
from the including LaTeX-document, e.g., "\itshape
\input{fig1.pict2e}". See also -o (no font size).
-f font
Set the default font used for text objects to font. The string
font may be one of rm, bf, it, sf, tt, \rmfamily, fseries,
\itshape, \sffamily, \ttfamily, or one of the 35 standard
PostScript font names. The default is \rmfamily.
-i dir Prepend the string dir to graphics files included in the pict2e-
picture. For instance, having imported "image.jpg" in xfig,
with - i '$HOME/Figures/' the code
"\incudegraphics{$HOME/Figures/image.jpg}" will be generated.
-o Do not set the font size or baselineskip. Text will be rendered
at the size that is in force where the pict2e-code is inserted
into the LaTeX-document, e.g., "\small \input{fig1.pict2e}".
See also -F (no font properties).
-O Do not quote characters special to TeX/LaTeX. Useful to get,
e.g., an italic x, not $x$, because it was forgotten to set the
text-flag "special-text" in xfig. This option effectively sets
the "special-text" flag for all text.
-P Pagemode, generate a stand-alone LaTeX-file as out-file. The
document produced from the LaTeX-file will have the paper size
equal to the figure's bounding box (but see the -b option to add
a margin). The generated LaTeX-file calls the package
"geometry.sty" to set the paper size.
-R num Replace arrowheads num by LaTeX-arrows ("\vector"). The number
of an arrowhead ("Arrow Type" in xfig) can be found by opening
the arrow chooser widget in xfig and counting the arrows,
starting from 1. For instance, to replace filled triangle
arrowheads with LaTeX \vector-commands, use -R 3.
-r Replace all arrows by LaTeX-arrows.
-T Only use TeX fonts, even where PostScript-fonts are specified.
-v Verbose mode. Write comment lines into the output file, usually
naming the type of the object that is drawn.
-w Remove the suffix from included graphics-files. With this
option on, fig2dev generates code that contains, e.g.,
"\includegraphics{fig1}", instead of
"\includegraphics{fig1.eps}".
PICTEX OPTIONS
In order to include PiCTeX pictures into a document, it is necessary to
load the PiCTeX macros.
PiCTeX uses TeX integer register arithmetic to generate curves, and so
it is very slow. PiCTeX draws curves by \put-ing the psymbol
repeatedly, and so requires a large amount of TeX's internal memory,
and generates large DVI files. The size of TeX's memory limits the
number of plot symbols in a picture. As a result, it is best to use
PiCTeX to generate small pictures.
-a Anonymous mode. Do not write the user name into the output file.
-E num Set encoding for latex text translation (0 = no translation, 1 =
ISO-8859-1, 2 = ISO-8859-2).
-f font
Set the default font used for text objects to font, where font
is one of rm, bf, it, sf or tt. The default is rm.
-l dimen
Set line thickness to dimen. Default "1pt".
-p psymbol
Set the psymbol. Default
"\makebox(0,0)[l]{\tencirc\symbol{'160}}".
-r Do not allow rotated text. Otherwise, files with PiCTeX macros
and rotated text need to be processed with dvips.
GBX OPTIONS (Gerber, RS-247-X)
Typically you will wish to set the y scale to -1. See -g for more
information.
-d [mm|in]
Output dimensions should be assumed to be millimeters (mm) or
inches (in). The default is millimeters.
-p [pos|neg]
Select the image polarity. For positive images lines drawn in
the fig file will generate lines of material. For negative
images lines drawn in the fig file will result in removed
material. Consider etching a chrome on glass transmission mask.
Drawing lines in the fig file and choosing 'neg' will result in
these lines being etched through the chrome, leaving transparent
lines.
-g <x scale>x<y scale>+<x offset>+<y offset>
This controls the geometry of the output, scaling the dimensions
as shown and applying the given offset. Typically you will wish
to set the y scale to -1, mirroring about the x axis. This is
because Gerber assumes the origin to be bottom left, while xfig
selects top left.
-f <n digits>.<n digits>
This controls the number of digits of precision before and after
the implied decimal point. With -f 5.3 the following number
12345678 corresponds to 12345.678. Whereas with -f 3.5 it
corresponds to 123.45678. The default is for 3 places before
the decimal point and 5 after. This corresponds, to a range of
0 to 1m in 10 micron increments.
-i [on|off]
Controls the output of comments describing the type of objects
being output. The text appears as comments starting with ## on
each line in the output file. By default this is on.
POSTSCRIPT, ENCAPSULATED POSTSCRIPT (EPS), and PDF OPTIONS
With PostScript, xfig can be used to create multiple page figures
Specify the -M option to produce a multi-page output. For posters, add
-O to overlap the pages slightly to get around the problem of the
unprintable area in most printers, then cut and paste the pages
together. Due to memory limitations of most laser printers, the figure
should not have large imported images (bitmaps). Great for text with
very big letters.
The EPS driver has the following differences from PostScript:
o No showpage is generated because the output is meant to be
imported into another program or document and not printed
o The landscape/portrait options are ignored
o The centering option is ignored
o The multiple-page option is ignored
o The paper size option is ignored
o The x/y offset options are ignored
The EPS driver has the following two special options:
-B 'Wx [Wy X0 Y0]'
This specifies that the bounding box of the EPS file should have
the width Wx and the height Wy. Note that it doesn't scale the
figure to this size, it merely sets the bounding box. If a
value less than or equal to 0 is specified for Wx or Wy, these
are set to the width/height respectively of the figure. Origin
is relative to screen (0,0) (upper-left). Wx, Wy, X0 and Y0 are
interpreted in centimeters or inches depending on the measure
given in the fig-file. Remember to put either quotes (") or
apostrophes (') to group the arguments to -B.
-R 'Wx [Wy X0 Y0]'
Same as the -B option except that X0 and Y0 is relative to the
lower left corner of the figure. Remember to put either quotes
(") or apostrophes (') to group the arguments to -R.
The PDF driver uses all the PostScript options.
Text can now include various ISO-character codes above 0x7f, which is
useful for language specific characters to be printed directly. Not
all ISO-characters are implemented.
Color support: Colored objects created by Fig can be printed on a color
postscript printer. There are 32 standard colors: black, yellow, white,
gold, five shades of blue, four shades of green, four shades of cyan,
four shades of red, five shades of magenta, four shades of brown, and
four shades of pink. In addition there may be user-defined colors in
the file. See the xfig FORMAT3.2 file for the definition of these
colors. On a monochrome printer, colored objects will be mapped into
different grayscales by the printer. Filled objects are printed using
the given area fill and color. There are 21 "shades" going from black
to full saturation of the fill color, and 21 more "tints" from full
saturation + 1 to white. In addition, there are 16 patterns such as
bricks, diagonal lines, crosshatch, etc.
-A Add an ASCII (EPSI) preview.
-b borderwidth
Make blank border around figure of width borderwidth.
Not available in EPS.
-C dummy_arg
Add a color *binary* TIFF preview for Microsoft products that
need a binary preview. See also -T (monochrome preview). A
dummy argument must be supplied for historical reasons.
-c option centers the figure on the page. The centering may not be
accurate if there are texts in the fig_file that extends too far
to the right of other objects.
-e option puts the figure against the edge (not centered) of the
page. Not available in EPS.
-F Use correct font sizes (points, 1/72 inch) instead of the
traditional size that xfig/fig2dev uses, which is 1/80 inch.
The corresponding xfig command-line option is
-correct_font_size.
-f font
Set the default font used for text objects to font, where font
is one of the 35 standard PostScript font names. The default is
Times-Roman.
-g color
Use color for the background.
-l dummy_arg
Generate figure in landscape mode. The dummy argument is
ignored, but must appear on the command line for reasons of
compatibility. This option will override the orientation
specification in the file (for file versions 3.0 and higher).
Not available in EPS.
-M Generate multiple pages if figure exceeds paper size.
Not available in EPS.
-N Convert all colors to grayscale.
-n name
Set the Title part of the PostScript output to name. This is
useful when the input to fig2dev comes from standard input.
-O When used with -M, overlaps the pages slightly to get around the
problem of the unprintable area in most printers.
Not available in EPS.
-p dummy_arg
Generate figure in portrait mode. The dummy argument is
ignored, but must appear on the command line for reasons of
compatibility. This option will override the orientation
specification in the file (for file versions 3.0 and higher).
This is the default for Fig files of version 2.1 or lower.
Not available in EPS.
-T Add a monochrome *binary* TIFF preview for Microsoft products
that need a binary preview. See also -C (color preview).
-x offset
Shift the figure in the X direction by offset PostScript points
(1/72 inch). A negative value shifts the figure to the left and
a positive value to the right.
Not available in EPS.
-y offset
Shift the figure in the Y direction by offset points (1/72
inch). A negative value shifts the figure up and a positive
value down.
Not available in EPS.
-z papersize
Set the papersize. Not available in EPS.
Available paper sizes are:
Letter (8.5" x 11" also A),
Legal ( 11" x 14")
Ledger ( 11" x 17"),
Tabloid ( 17" x 11", really Ledger in Landscape mode),
A (8.5" x 11" also Letter),
B ( 11" x 17" also Ledger),
C ( 17" x 22"),
D ( 22" x 34"),
E ( 34" x 44"),
A9 ( 37 mm x 52 mm),
A8 ( 52 mm x 74 mm),
A7 ( 74 mm x 105 mm),
A6 (105 mm x 148 mm),
A5 (148 mm x 210 mm),
A4 (210 mm x 297 mm),
A3 (297 mm x 420 mm),
A2 (420 mm x 594 mm),
A1 (594 mm x 841 mm),
A0 (841 mm x1189 mm),
B10 ( 32 mm x 45 mm),
B9 ( 45 mm x 64 mm),
B8 ( 64 mm x 91 mm),
B7 ( 91 mm x 128 mm),
B6 (128 mm x 182 mm),
B5 (182 mm x 257 mm),
B4 (257 mm x 364 mm),
B3 (364 mm x 515 mm),
B2 (515 mm x 728 mm),
B1 (728 mm x1030 mm),
B0 (1030mm x1456 mm).
PSTEX OPTIONS
The pstex language is a variant of ps which suppresses formatted
(special) text. The pstex_t language has the complementary behavior:
it generates only the LaTeX special text and the commands necessary to
position special text, and to overlay the PostScript file generated
using pstex. These two drivers can be used to generate a figure which
combines the flexibility of PostScript graphics with LaTeX text
formatting of special text.
-F Use correct font sizes (points) instead of the traditional size
that xfig/fig2dev uses, which is 1/80 inch. The corresponding
xfig command-line option is -correct_font_size.
-g color
Use color for the background.
-n name
Set the Title part of the PostScript output to name. This is
useful when the input to fig2dev comes from standard input.
PSTEX_T OPTIONS
The pstex_t language produces only the LaTeX special text and the
commands necessary to position special text, and to overlay the
PostScript file generated using pstex. (see above)
-E num Set encoding for latex text translation (0 no translation, 1
ISO-8859-1, 2 ISO-8859-2)
-F Don't set the font face, series, and style; only set it's size
and the baselineskip. By default, fig2dev sets all 5 font
parameters when it puts some text. The disadvantage is that you
can't set the font from your LaTeX document. With this option
on, you can set the font from your LaTeX document (like
"\sfshape \input picture.eepic").
-p file
specifies the name of the PostScript file to be overlaid. If
not set or its value is null then no PS file will be inserted.
PSTricks OPTIONS
The PSTricks driver provides full LaTeX text and math formatting for
XFig drawings without overlaying separate outputs as in the PSTEX
methods. The output matches the quality of output of the PostScript
driver except for text, where the Latex font selection mechanism is
used as for other fig2dev LaTeX drivers. In addition, text is rendered
black, although font color-changing LaTex code can be embedded in the
drawing. The generated PSTricks code is meant to be readable. Each
command stands alone, not relying on global option state variables.
Thus the user can easily use XFig to rough out a PSTricks drawing, then
finish by hand editing.
To use the driver's output, give the command "\usepackage{pstricks}" in
your document preamble. The graphicx and pstricks-add packages may
also be required. The former is used for bitmap graphics and the
second for complex line styles and/or hollow PSTricks arrows (with the
-R 1 option). The driver will tell you which packages are needed. In
the document body, include the figure with "\input{pstfile}" where
pstfile.tex is the output file. Use the XFig special flag to have text
passed as-is to LaTeX. For non-special text, the same mechanism as the
LaTeX and epic driver mechanism is used to match font specs, but this
is imprecise.
Known bugs and limitations.
PSTricks support for join styles is version dependent. Raw
postscript is inserted with "\pstVerb" for old versions when
other than angle joins are needed. The -t option controls this
behavior. PSTricks does not support rotated ellipses directly,
so a rput command is emitted that rotates and locates a
horizontal ellipse. This makes a problem with hatch patterns,
which are moved and rotated along with the ellipse. Hatch
rotation is fixed by a counter-rotation, but the origin is not
adjusted, so registration with adjacent hatch patterns will be
incorrect. Flipped bitmap graphics use an undocumented feature
of the graphicx package: a negative height flips the image
vertically. This appears to work reliably. However, you may
want to flip graphics with another program before including them
in Xfig drawings just to be sure. With the -p option, the
driver attempts to convert non-EPS pictures to EPS with the TeX
distribution's bmeps program, but bmeps does not know about very
many file formats including gif.
-f font
Set the default font used for text objects to font, where font
is one of rm, bf, it, sf or tt. The default is rm.
-G dummy_arg
Draws a standard PSTricks grid in light gray, ignoring the size
parameters, numbered in PSTricks units.
-l weight
Sets a line weight factor that is multiplied by the actual Fig
line width. The default value 0.5 roughly matches the output of
the PS driver.
-n 0|1|2|3
Sets environment type. Default 0 creates a \picture environment
with bounding box exactly enclosing the picture (but see -x and
-y ). A 1 emits bare PSTricks commands with no environment at
all, which can be used with \input{commands} inside an existing
\pspicture. A 2 emits a complete LaTeX document. A 3 also
emits a complete LaTeX document but attempts to set the PSTricks
unit to fit a 7.5 by 10 inch (portrait aspect) box.
-P Shorthand for -n 3.
-p dir Attempts to run the bmeps program to translate picture files to
EPS, which is required by PSTricks. The translated files go in
dir , which must already exist (the driver will not create it).
Moreover, (BIG CAVEAT HERE) the driver overwrites files with
impunity in this directory! Don't put your stuff here. The
includegraphics commands in the output file refer to this
directory. Even if the -p option is not used, includegraphics
commands follow this convention with the default directory ./eps
. In this case, the user must do the conversions independently.
The bmeps program is part of the standard TeX distribution. It
converts the following formats to EPS: png jpg pnm tif. You can
see the bmeps command with the -v option.
-R 0|1|2
Sets arrow style. With the default style 0, Fig arrows are
converted to lines and polygons. With style 1, the Fig
arrowhead dimensions are converted to PSTricks arrowhead
dimensions and PSTricks arrowhead options are emitted. Hollow
arrows will require the additional package pstricks-add. With
style 2, PSTricks arrowhead options are emitted with no
dimensions at all, and arrowhead size may be controlled globally
with psset.
-S scale
Scales the image according to the same convention as the EPIC
driver, i.e., to size scale/12.
-t version
Provides the driver with PSTricks version number so output can
match expected LaTeX input.
-v Print verbose warnings and extra comments in the output file.
Information provided includes font substitution details, the
bmeps commands used for picture conversion, if any, and one
comment per Fig object in the output.
-x marginsize
Adds marginsize on the left and right of the PStricks bounding
box. By default, the box exactly encloses the image.
-y marginsize
Adds marginsize on the top and bottom of the PStricks bounding
box. By default, the box exactly encloses the image.
-z 0|1|2
Sets font handling option. Default option 0 attempts to honor
Fig font names and sizes, finding the best match with a standard
LaTeX font. Option 1 sets LaTeX font size only. Option 2
issues no font commands at all.
TEXTYL OPTIONS
-f font
Set the default font used for text objects to font, where font
is one of rm, bf, it, sf or tt. The default is rm.
-l lwidth
Set the line thickness. lwidth must be a value between 1 and 12.
TIKZ OPTIONS
TIKZ is a powerful frontend to the Portable Graphics Format (PGF)
developed by Till Tantau, now at the University of Lbeck. TIKZ was
developed to be as platform-independent as possible, i.e., tikz-code
can be processed with plain TeX, pdftex, xetex, LaTeX, ConTeX,
pdflatex, lualatex, or combinations of LaTeX + dvips, LaTeX + dvipdfm
or others. The TIKZ-code emitted by fig2dev tries to maintain this
portability. For instance, a tikz-picture is commenced with
\tikzpicture (TeX-style), to not exclude any processing engine.
However, the stand-alone file produced with the -P option must be
processed with a LaTeX-engine. In addition, font-commands may require
a LaTeX engine.
-b borderwidth
Make blank border around figure of width borderwidth*(1/72)
inches.
-C num Do not emit a \color-command for the color number num. (0 =
black, 1 = blue, 2 = green - see the color chooser widget in
Xfig). By default, fig2dev does not issue a \color-command for
objects which have the color set to "Default" in xfig. With
this option, the "\color"-command is also omitted for objects
having the color num. The color of these objects, as well as of
those having the color set to "Default", is picked up from the
including document.
-E num Set encoding for text translation (0 = no translation, 1 =
ISO-8859-1, 2 = ISO-8859-2). For instance, to use utf8-encoded
text, first create a text object, then edit the text using the
edit-button in xfig. Convert the fig-file to tikz with the
option -E 0 and include "\usepackage[utf8]{inputenc}" in the
LaTeX file (not necessary when using xelatex). In xfig, the
text typed in may not be displayed correctly, but the document
produced from the LaTeX file will show the same text as was
typed in.
-F Do not set the font family, series or shape. By default,
fig2dev sets the font family, series, shape, font size and
baselineskip. As a side effect, this requires the New Font
Selection Scheme (NFSS) of LaTeX. With this option on, the text
font can be set from the including document, which may be TeX or
LaTeX. See also -o (no font size).
-f font
Set the default font used for text objects to font. The string
font may be one of rm, bf, it, sf, tt, \rmfamily, fseries,
\itshape, \sffamily, \ttfamily, or one of the 35 standard
PostScript font names. The default is \rmfamily.
-i dir Prepend the string dir to graphics files included in the tikz-
picture. For instance, having imported "image.jpg" in xfig,
with - i '$HOME/Figures/' the code "\pgfimage[width=...,
height=...]{$HOME/Figures/image.jpg}" will be generated.
-o Do not set the font size or baselineskip. Text will be rendered
at the size that is in force where the tikz-code is inserted
into the document, e.g., "\small\input fig1.tikz". See also -F
(no font properties).
-O Do not quote characters special to TeX/LaTeX. Useful to get,
e.g., an italic x, not $x$, because it was forgotten to set the
text-flag "special-text" in xfig. This option effectively sets
the "special-text" flag for all text.
-P Pagemode, generate a stand-alone LaTeX-file as out-file. The
document produced from the LaTeX-file will have the paper size
equal to the figure's bounding box (but see the -b option to add
a margin). The generated LaTeX-file calls the package
"geometry.sty" to set the paper size.
-T Only use TeX fonts, even where PostScript-fonts are specified.
-v Verbose mode. Write comment lines into the output file, usually
naming the type of the object that is drawn.
-w Remove the suffix from included graphics-files. With this
option on, fig2dev generates code that contains, e.g.,
"\pgfimage{fig1}", instead of "\pgfimage{fig1.pdf}".
TK and PTK OPTIONS (tcl/tk and Perl/tk)
-l dummy_arg
Generate figure in landscape mode. The dummy argument is
ignored, but must appear on the command line for reasons of
compatibility. This option will override the orientation
specification in the file (for file versions 3.0 and higher).
-p dummy_arg
Generate figure in portrait mode. The dummy argument is
ignored, but must appear on the command line for reasons of
compatibility. This option will override the orientation
specification in the file (for file versions 3.0 and higher).
This is the default for Fig files of version 2.1 or lower.
-P Generate canvas of full page size instead of using the bounding
box of the figure's objects. The default is to use only the
bounding box.
-z papersize
Set the paper size. See the POSTSCRIPT OPTIONS for available
paper sizes. This is only used when the -P option (use full
page) is used.
TPIC OPTIONS
-f font
Set the default font used for text objects to font. The default
is rm. The string font can be one of rm, bf, it, sf, tt, avant,
avantcsc, avantd, avantdi, avanti, bookd, bookdi, bookl,
booklcsc, bookli, chanc, cour, courb, courbi, couri, helv,
helvb, helvbi, helvc, helvcb, helvcbi, helvci, helvcsc, helvi,
pal, palb, palbi, palbu, palc, palcsc, pali, palsl, palu, palx,
times, timesb, timesbi, timesc, timescsc, timesi, timessl or
timesx.
SEE ALSO
[x]fig(1), pic(1), pic2fig(1), transfig(1)
BUGS and RESTRICTIONS
Please send bug reports, fixes, new features etc. to: [email protected] Arc-boxes are not supported for the tk output language, and only X bitmap pictures are supported because of the canvas limitation in tk. Picture objects are not scaled with the magnification factor for tk output. Because tk scales canvas items according to the X display resolution, polygons, lines, etc. may be scaled differently than imported pictures (bitmaps) which aren't scaled at all. Rotated text is only supported in the IBM-GL (HP/GL) and PostScript (including eps) languages.
COPYRIGHT
Copyright (c) 1991 Micah Beck Parts Copyright (c) 1985 Supoj Sutantavibul Parts Copyright (c) 1989-1999 Brian V. Smith Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. The authors make no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. THE AUTHORS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
AUTHORS
Micah Beck Cornell University Sept 28 1990 and Frank Schmuck (then of Cornell University) and Conrad Kwok (then of U.C. Davis). Drivers contributed by Jose Alberto Fernandez R. (U. of Maryland) and Gary Beihl (MCC) Color support, ISO-character encoding and poster support by Herbert Bauer ([email protected]) Modified from f2p (fig to PIC), by the author of Fig Supoj Sutanthavibul ([email protected]) University of Texas at Austin. MetaFont driver by Anthony Starks ([email protected]) X-splines code by Carole Blanc ([email protected]) Christophe Schlick ([email protected]) The initial implementation was done by C. Feuille, S. Grobois, L. Maziere and L. Minihot as a student practice (Universite Bordeaux, France). Japanese text support for LaTeX output written by T. Sato ([email protected]) The tk driver was written by Mike Markowski ([email protected]) with a little touch-up by Brian Smith The CGM driver (Computer Graphics Metafile) was written by Philippe Bekaert ([email protected]) The EMF driver (Enhanced Metafile) was written by Michael Schrick ([email protected]) The GBX (Gerber) driver was written by Edward Grace ([email protected]).
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
