wtmp(5)
NAME
utmp, wtmp - login records
SYNOPSIS
#include <utmp.h>
DESCRIPTION
The utmp file allows one to discover information about who is currently
using the system. There may be more users currently using the system,
because not all programs use utmp logging.
Warning: utmp must not be writable by the user class "other", because
many system programs (foolishly) depend on its integrity. You risk
faked system logfiles and modifications of system files if you leave
utmp writable to any user other than the owner and group owner of the
file.
The file is a sequence of utmp structures, declared as follows in
<utmp.h> (note that this is only one of several definitions around;
details depend on the version of libc):
/* Values for ut_type field, below */
#define EMPTY 0 /* Record does not contain valid info
(formerly known as UT_UNKNOWN on Linux) */
#define RUN_LVL 1 /* Change in system run-level (see
init(8)) */
#define BOOT_TIME 2 /* Time of system boot (in ut_tv) */
#define NEW_TIME 3 /* Time after system clock change
(in ut_tv) */
#define OLD_TIME 4 /* Time before system clock change
(in ut_tv) */
#define INIT_PROCESS 5 /* Process spawned by init(8) */
#define LOGIN_PROCESS 6 /* Session leader process for user login */
#define USER_PROCESS 7 /* Normal process */
#define DEAD_PROCESS 8 /* Terminated process */
#define ACCOUNTING 9 /* Not implemented */
#define UT_LINESIZE 32
#define UT_NAMESIZE 32
#define UT_HOSTSIZE 256
struct exit_status { /* Type for ut_exit, below */
short int e_termination; /* Process termination status */
short int e_exit; /* Process exit status */
};
struct utmp {
short ut_type; /* Type of record */
pid_t ut_pid; /* PID of login process */
char ut_line[UT_LINESIZE]; /* Device name of tty - "/dev/" */
char ut_id[4]; /* Terminal name suffix,
or inittab(5) ID */
char ut_user[UT_NAMESIZE]; /* Username */
char ut_host[UT_HOSTSIZE]; /* Hostname for remote login, or
kernel version for run-level
messages */
struct exit_status ut_exit; /* Exit status of a process
marked as DEAD_PROCESS; not
used by Linux init (1 */
/* The ut_session and ut_tv fields must be the same size when
compiled 32- and 64-bit. This allows data files and shared
memory to be shared between 32- and 64-bit applications. */
#if __WORDSIZE == 64 && defined __WORDSIZE_COMPAT32
int32_t ut_session; /* Session ID (getsid(2)),
used for windowing */
struct {
int32_t tv_sec; /* Seconds */
int32_t tv_usec; /* Microseconds */
} ut_tv; /* Time entry was made */
#else
long ut_session; /* Session ID */
struct timeval ut_tv; /* Time entry was made */
#endif
int32_t ut_addr_v6[4]; /* Internet address of remote
host; IPv4 address uses
just ut_addr_v6[0] */
char __unused[20]; /* Reserved for future use */
};
/* Backward compatibility hacks */
#define ut_name ut_user
#ifndef _NO_UT_TIME
#define ut_time ut_tv.tv_sec
#endif
#define ut_xtime ut_tv.tv_sec
#define ut_addr ut_addr_v6[0]
This structure gives the name of the special file associated with the
user's terminal, the user's login name, and the time of login in the
form of time(2). String fields are terminated by a null byte ('\0') if
they are shorter than the size of the field.
The first entries ever created result from init(1) processing
inittab(5). Before an entry is processed, though, init(1) cleans up
utmp by setting ut_type to DEAD_PROCESS, clearing ut_user, ut_host, and
ut_time with null bytes for each record which ut_type is not
DEAD_PROCESS or RUN_LVL and where no process with PID ut_pid exists.
If no empty record with the needed ut_id can be found, init(1) creates
a new one. It sets ut_id from the inittab, ut_pid and ut_time to the
current values, and ut_type to INIT_PROCESS.
mingetty(8) (or agetty(8)) locates the entry by the PID, changes
ut_type to LOGIN_PROCESS, changes ut_time, sets ut_line, and waits for
connection to be established. login(1), after a user has been
authenticated, changes ut_type to USER_PROCESS, changes ut_time, and
sets ut_host and ut_addr. Depending on mingetty(8) (or agetty(8)) and
login(1), records may be located by ut_line instead of the preferable
ut_pid.
When init(1) finds that a process has exited, it locates its utmp entry
by ut_pid, sets ut_type to DEAD_PROCESS, and clears ut_user, ut_host
and ut_time with null bytes.
xterm(1) and other terminal emulators directly create a USER_PROCESS
record and generate the ut_id by using the string that suffix part of
the terminal name (the characters following /dev/[pt]ty). If they find
a DEAD_PROCESS for this ID, they recycle it, otherwise they create a
new entry. If they can, they will mark it as DEAD_PROCESS on exiting
and it is advised that they null ut_line, ut_time, ut_user, and ut_host
as well.
telnetd(8) sets up a LOGIN_PROCESS entry and leaves the rest to
login(1) as usual. After the telnet session ends, telnetd(8) cleans up
utmp in the described way.
The wtmp file records all logins and logouts. Its format is exactly
like utmp except that a null username indicates a logout on the
associated terminal. Furthermore, the terminal name ~ with username
shutdown or reboot indicates a system shutdown or reboot and the pair
of terminal names |/} logs the old/new system time when date(1) changes
it. wtmp is maintained by login(1), init(1), and some versions of
getty(8) (e.g., mingetty(8) or agetty(8)). None of these programs
creates the file, so if it is removed, record-keeping is turned off.
FILES
/var/run/utmp /var/log/wtmp
CONFORMING TO
POSIX.1 does not specify a utmp structure, but rather one named utmpx, with specifications for the fields ut_type, ut_pid, ut_line, ut_id, ut_user, and ut_tv. POSIX.1 does not specify the lengths of the ut_line and ut_user fields. Linux defines the utmpx structure to be the same as the utmp structure. Comparison with historical systems Linux utmp entries conform neither to v7/BSD nor to System V; they are a mix of the two. v7/BSD has fewer fields; most importantly it lacks ut_type, which causes native v7/BSD-like programs to display (for example) dead or login entries. Further, there is no configuration file which allocates slots to sessions. BSD does so because it lacks ut_id fields. In Linux (as in System V), the ut_id field of a record will never change once it has been set, which reserves that slot without needing a configuration file. Clearing ut_id may result in race conditions leading to corrupted utmp entries and potential security holes. Clearing the abovementioned fields by filling them with null bytes is not required by System V semantics, but makes it possible to run many programs which assume BSD semantics and which do not modify utmp. Linux uses the BSD conventions for line contents, as documented above. System V has no ut_host or ut_addr_v6 fields.
NOTES
Unlike various other systems, where utmp logging can be disabled by removing the file, utmp must always exist on Linux. If you want to disable who(1), then do not make utmp world readable. The file format is machine-dependent, so it is recommended that it be processed only on the machine architecture where it was created. Note that on biarch platforms, that is, systems which can run both 32-bit and 64-bit applications (x86-64, ppc64, s390x, etc.), ut_tv is the same size in 32-bit mode as in 64-bit mode. The same goes for ut_session and ut_time if they are present. This allows data files and shared memory to be shared between 32-bit and 64-bit applications. This is achieved by changing the type of ut_session to int32_t, and that of ut_tv to a struct with two int32_t fields tv_sec and tv_usec. Since ut_tv may not be the same as struct timeval, then instead of the call: gettimeofday((struct timeval *) &ut.ut_tv, NULL); the following method of setting this field is recommended: struct utmp ut; struct timeval tv; gettimeofday(&tv, NULL); ut.ut_tv.tv_sec = tv.tv_sec; ut.ut_tv.tv_usec = tv.tv_usec;
SEE ALSO
ac(1), date(1), init(1), last(1), login(1), logname(1), lslogins(1), users(1), utmpdump(1), who(1), getutent(3), getutmp(3), login(3), logout(3), logwtmp(3), updwtmp(3)
COLOPHON
This page is part of release 4.09 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
