urandom(4)
NAME
random, urandom - kernel random number source devices
SYNOPSIS
#include <linux/random.h> int ioctl(fd, RNDrequest, param);
DESCRIPTION
The character special files /dev/random and /dev/urandom (present since Linux 1.3.30) provide an interface to the kernel's random number generator. The file /dev/random has major device number 1 and minor device number 8. The file /dev/urandom has major device number 1 and minor device number 9. The random number generator gathers environmental noise from device drivers and other sources into an entropy pool. The generator also keeps an estimate of the number of bits of noise in the entropy pool. From this entropy pool, random numbers are created. Linux 3.17 and later provides the simpler and safer getrandom(2) interface which requires no special files; see the getrandom(2) manual page for details. When read, the /dev/urandom device returns random bytes using a pseudorandom number generator seeded from the entropy pool. Reads from this device do not block (i.e., the CPU is not yielded), but can incur an appreciable delay when requesting large amounts of data. When read during early boot time, /dev/urandom may return data prior to the entropy pool being initialized. If this is of concern in your application, use getrandom(2) or /dev/random instead. The /dev/random device is a legacy interface which dates back to a time where the cryptographic primitives used in the implementation of /dev/urandom were not widely trusted. It will return random bytes only within the estimated number of bits of fresh noise in the entropy pool, blocking if necessary. /dev/random is suitable for applications that need high quality randomness, and can afford indeterminate delays. When the entropy pool is empty, reads from /dev/random will block until additional environmental noise is gathered. If open(2) is called for /dev/random with the O_NONBLOCK flag, a subsequent read(2) will not block if the requested number of bytes is not available. Instead, the available bytes are returned. If no byte is available, read(2) will return -1 and errno will be set to EAGAIN. The O_NONBLOCK flag has no effect when opening /dev/urandom. When calling read(2) for the device /dev/urandom, reads of up to 256 bytes will return as many bytes as are requested and will not be interrupted by a signal handler. Reads with a buffer over this limit may return less than the requested number of bytes or fail with the error EINTR, if interrupted by a signal handler. Since Linux 3.16, a read(2) from /dev/urandom will return at most 32 MB. A read(2) from /dev/random will return at most 512 bytes (340 bytes on Linux kernels before version 2.6.12). Writing to /dev/random or /dev/urandom will update the entropy pool with the data written, but this will not result in a higher entropy count. This means that it will impact the contents read from both files, but it will not make reads from /dev/random faster. Usage The /dev/random interface is considered a legacy interface, and /dev/urandom is preferred and sufficient in all use cases, with the exception of applications which require randomness during early boot time; for these applications, getrandom(2) must be used instead, because it will block until the entropy pool is initialized. If a seed file is saved across reboots as recommended below (all major Linux distributions have done this since 2000 at least), the output is cryptographically secure against attackers without local root access as soon as it is reloaded in the boot sequence, and perfectly adequate for network encryption session keys. Since reads from /dev/random may block, users will usually want to open it in nonblocking mode (or perform a read with timeout), and provide some sort of user notification if the desired entropy is not immediately available. Configuration If your system does not have /dev/random and /dev/urandom created already, they can be created with the following commands: mknod -m 666 /dev/random c 1 8 mknod -m 666 /dev/urandom c 1 9 chown root:root /dev/random /dev/urandom When a Linux system starts up without much operator interaction, the entropy pool may be in a fairly predictable state. This reduces the actual amount of noise in the entropy pool below the estimate. In order to counteract this effect, it helps to carry entropy pool information across shut-downs and start-ups. To do this, add the lines to an appropriate script which is run during the Linux system start-up sequence: echo "Initializing random number generator..." random_seed=/var/run/random-seed # Carry a random seed from start-up to start-up # Load and then save the whole entropy pool if [ -f $random_seed ]; then cat $random_seed >/dev/urandom else touch $random_seed fi chmod 600 $random_seed poolfile=/proc/sys/kernel/random/poolsize [ -r $poolfile ] && bits=$(cat $poolfile) || bits=4096 bytes=$(expr $bits / 8) dd if=/dev/urandom of=$random_seed count=1 bs=$bytes Also, add the following lines in an appropriate script which is run during the Linux system shutdown: # Carry a random seed from shut-down to start-up # Save the whole entropy pool echo "Saving random seed..." random_seed=/var/run/random-seed touch $random_seed chmod 600 $random_seed poolfile=/proc/sys/kernel/random/poolsize [ -r $poolfile ] && bits=$(cat $poolfile) || bits=4096 bytes=$(expr $bits / 8) dd if=/dev/urandom of=$random_seed count=1 bs=$bytes In the above examples, we assume Linux 2.6.0 or later, where /proc/sys/kernel/random/poolsize returns the size of the entropy pool in bits (see below). /proc interfaces The files in the directory /proc/sys/kernel/random (present since 2.3.16) provide additional information about the /dev/random device: entropy_avail This read-only file gives the available entropy. Normally, this will be 4096 (bits), a full entropy pool. poolsize This file gives the size of the entropy pool. The semantics of this file vary across kernel versions: Linux 2.4: This file gives the size of the entropy pool in bytes. Normally, this file will have the value 512, but it is writable, and can be changed to any value for which an algorithm is available. The choices are 32, 64, 128, 256, 512, 1024, or 2048. Linux 2.6 and later This file is read-only, and gives the size of the entropy pool in bits. It contains the value 4096. read_wakeup_threshold This file contains the number of bits of entropy required for waking up processes that sleep waiting for entropy from /dev/random. The default is 64. write_wakeup_threshold This file contains the number of bits of entropy below which we wake up processes that do a select(2) or poll(2) for write access to /dev/random. These values can be changed by writing to the files. uuid and boot_id These read-only files contain random strings like 6fd5a44b-35f4-4ad4-a9b9-6b9be13e1fe9. The former is generated afresh for each read, the latter was generated once. ioctl(2) interface The following ioctl(2) requests are defined on file descriptors connected to either /dev/random or /dev/urandom. All requests performed will interact with the input entropy pool impacting both /dev/random and /dev/urandom. The CAP_SYS_ADMIN capability is required for all requests except RNDGETENTCNT. RNDGETENTCNT Retrieve the entropy count of the input pool, the contents will be the same as the entropy_avail file under proc. The result will be stored in the int pointed to by the argument. RNDADDTOENTCNT Increment or decrement the entropy count of the input pool by the value pointed to by the argument. RNDGETPOOL Removed in Linux 2.6.9. RNDADDENTROPY Add some additional entropy to the input pool, incrementing the entropy count. This differs from writing to /dev/random or /dev/urandom, which only adds some data but does not increment the entropy count. The following structure is used: struct rand_pool_info { int entropy_count; int buf_size; __u32 buf[0]; }; Here entropy_count is the value added to (or subtracted from) the entropy count, and buf is the buffer of size buf_size which gets added to the entropy pool. RNDZAPENTCNT, RNDCLEARPOOL Zero the entropy count of all pools and add some system data (such as wall clock) to the pools.
NOTES
For an overview and comparison of the various interfaces that can be used to obtain randomness, see random(7).
BUGS
During early boot time, reads from /dev/urandom may return data prior to the entropy pool being initialized.
FILES
/dev/random /dev/urandom
SEE ALSO
mknod(1), getrandom(2), random(7) RFC 1750, "Randomness Recommendations for Security"
COLOPHON
This page is part of release 4.09 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
