/usr/bin/teem-puller - Command-line interface to the "pull" library.
teem-puller [@file ...] [-int <int>] [-enr <spec>] \fR
/usr/bin/teem-puller: Command-line interface to the "pull" library. Published research using this tool or the "pull" library should cite the paper: Gordon L. Kindlmann, Ra{\'u}l San Jos{\'e} Est{\'e}par, Stephen M. Smith, Carl-Fredrik Westin. Sampling and Visualizing Creases with Scale-Space Particles. IEEE Trans. on Visualization and Computer Graphics, 15(6):1415-1424 (2009). [-ens <spec>] [-enw <spec>] [-efs <bool>] [-nave <bool>] [-cbst <bool>] \ [-noadd] [-usa <bool>] [-pcet <bool>] [-nobin] [-lti <bool>] \ [-por <bool>] [-npcwza <bool>] [-ubfgl <bool>] [-ratb <bool>] \ [-svec <vec>] [-gssr <rad>] [-v <verbosity>] -vol <vol0 vol1 ...> \ -info <info0 info1 ...> [-k00 <kern00>] [-k11 <kern11>] [-k22 <kern22>] \ [-sscp <path>] [-kssb <kernel>] [-kssr <kernel>] [-nss <# scl smpls>] \ [-np <# points>] [-halton] [-ppv <# pnts/vox>] [-ppvzr <z range>] \ [-jit <jitter>] [-pi <npos>] [-step <step>] [-csm <step>] [-snap <# \ iters>] [-maxi <# iters>] [-stim <# iters>] [-maxci <# iters>] \ [-irad <scale>] [-srad <scale>] [-bws <bin width>] [-alpha <alpha>] \ [-beta <beta>] [-gamma <gamma>] [-theta <theta>] [-wall <k>] [-eip <k>] \ [-ess <scl>] [-oss <scl>] [-edmin <frac>] [-edpcmin <frac>] \ [-fnnm <frac>] [-pcp <period>] [-iad <# iters>] [-icb <# iters>] \ [-ac3c <ac3c>] [-sit <sit>] [-rng <seed>] [-pbm <mod>] [-eiphl <hl>] \ [-nt <# threads>] [-nprob <prob>] [-pprob <prob>] [-addlog <fname>] \ [-o <nout>] [-eob <base>] @file ... = response file(s) containing command-line arguments -int <int> = inter-particle energy type (interaction type); default: "justr" -enr <spec> = inter-particle energy, radial component (energy specification); default: "cotan" -ens <spec> = inter-particle energy, scale component (energy specification); default: "zero" -enw <spec> = windowing to create locality with additive scale-space interaction ("-int add") (energy specification); default: "butter:16,0.8" -efs <bool> = whether or not strength contributes to particle-image energy (bool); default: "false" -nave <bool> = whether or not to nix points at edge of volume, where gage had to invent values for kernel support (bool); default: "false" -cbst <bool> = during initialization, try constraint satisfaction before testing seedThresh (bool); default: "false" -noadd = turn off adding during population control -usa <bool> = allow volumes to have different shapes (false is safe as different volume sizes are often accidental) (bool); default: "false" -pcet <bool> = use neighbor-counting "enough" heuristic to bail out of pop cntl (bool); default: "true" -nobin = turn off spatial binning (which prevents multi-threading from being useful), for debugging or speed-up measurement -lti <bool> = impose liveThresh on initialization (bool); default: "true" -por <bool> = permute points during rebinning (bool); default: "true" -npcwza <bool> = no pop cntl with zero alpha (bool); default: "false" -ubfgl <bool> = use beta for gamma learning (bool); default: "false" -ratb <bool> = be choosy when adding points to bins to avoid overlap (bool); default: "true" -svec <vec> = if non-zero (length), vector to use for displaying scale in 3-space (3 doubles); default: "0 0 0" -gssr <rad> = if non-zero (length), scaling of scale to cylindrical tensors (double); default: "0.0" -v <verbosity> = verbosity level (int); default: "1" -vol <vol0 vol1 ...> = input volumes, in format <filename>:<kind>:<volname> (1 or more meetPullVols) -info <info0 info1 ...> = info definitions, in format <info>[-c]:<volname>:<item>[:<zero>:<scale>] (1 or more meetPullInfos) -k00 <kern00> = kernel for gageKernel00 (kernel specification); default: "cubic:1,0" -k11 <kern11> = kernel for gageKernel11 (kernel specification); default: "cubicd:1,0" -k22 <kern22> = kernel for gageKernel22 (kernel specification); default: "cubicdd:1,0" -sscp <path> = path (without trailing /) for where to read/write pre-blurred volumes for scale-space (string); default: "./" -kssb <kernel> = blurring kernel, to sample scale space (kernel specification); default: "ds:1,5" -kssr <kernel> = kernel for reconstructing from scale space samples (kernel specification); default: "hermite" -nss <# scl smpls> = if using "-ppv", number of samples along scale axis for each spatial position (unsigned int); default: "1" -np <# points> = number of points to start in system (unsigned int); default: "1000" -halton = use Halton sequence initialization instead of uniform random -ppv <# pnts/vox> = number of points per voxel to start in simulation (need to have a seed thresh vol, overrides "-np") (unsigned int); default: "0" -ppvzr <z range> = range of Z slices (1st num < 2nd num) to do ppv in, or, "1 0" for whole volume (2 unsigned ints); default: "1 0" -jit <jitter> = amount of jittering to do with ppv (double); default: "0" -pi <npos> = 4-by-N array of positions to start at (overrides "-np") (nrrd); default: "" -step <step> = initial step size for gradient descent (double); default: "1" -csm <step> = convergence criterion for constraint satisfaction (double); default: "0.0001" -snap <# iters> = if non-zero, # iters between saved snapshots (unsigned int); default: "0" -maxi <# iters> = if non-zero, max # iterations to run whole system (unsigned int); default: "0" -stim <# iters> = if non-zero, max # iterations to allow a particle to be stuck before nixing (unsigned int); default: "5" -maxci <# iters> = if non-zero, max # iterations for contraint enforcement (unsigned int); default: "15" -irad <scale> = particle radius in spatial domain (double); default: "1" -srad <scale> = particle radius in scale domain (double); default: "1" -bws <bin width> = spatial bin width as multiple of spatial radius (double); default: "1.001" -alpha <alpha> = blend between particle-image (alpha=0) and inter-particle (alpha=1) energies (double); default: "0.5" -beta <beta> = when using Phi2 energy, blend between pure space repulsion (beta=0) and scale attraction (beta=1) (double); default: "1.0" -gamma <gamma> = scaling factor on energy from strength (double); default: "1.0" -theta <theta> = slope of increasing livethresh wrt scale (double); default: "0.0" -wall <k> = spring constant on walls (double); default: "0.0" -eip <k> = amount by which its okay for *per-particle* energy to increase during gradient descent process (double); default: "0.0" -ess <scl> = when energy goes up instead of down, scale step size by this (double); default: "0.5" -oss <scl> = opportunistic scaling (hopefully up, >1) of step size on every iteration (double); default: "1.0" -edmin <frac> = convergence threshold: stop when fractional improvement (decrease) in energy dips below this (double); default: "0.0001" -edpcmin <frac> = population control is triggered when energy improvement goes below this threshold (double); default: "0.01" -fnnm <frac> = don't nix if this fraction (or more) of neighbors have been nixed (double); default: "0.25" -pcp <period> = # iters to wait between attempts at population control (unsigned int); default: "20" -iad <# iters> = # iters to run descent on tentative new points during PC (unsigned int); default: "10" -icb <# iters> = periodicity of calling rendering callback (unsigned int); default: "1" -ac3c <ac3c> = allow codimensions 3 constraints (bool); default: "false" -sit <sit> = scale is tau (bool); default: "false" -rng <seed> = base seed value for RNGs (unsigned int); default: "42" -pbm <mod> = progress bin mod (unsigned int); default: "50" -eiphl <hl> = half-life of energyIncreasePermute ("-eip") (unsigned int); default: "0" -nt <# threads> = number of threads hoover should use (int); default: "1" -nprob <prob> = do full neighbor discovery with this probability (double); default: "1.0" -pprob <prob> = probe local image values with this probability (double); default: "1.0" -addlog <fname> = name of file in which to log all particle additions (string); default: "" -o <nout> = output volume (string); default: "-" -eob <base> = save extra info (besides position), and use this string as the base of the filenames. Not using this means the extra info is not saved. (string); default: ""
The full documentation for Teem is maintained as a Texinfo manual. If the info and Teem programs are properly installed at your site, the command info Teem should give you access to the complete manual.
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.