swapoff(8)
NAME
swapon, swapoff - enable/disable devices and files for paging and swapping
SYNOPSIS
swapon [options] [specialfile...] swapoff [-va] [specialfile...]
DESCRIPTION
swapon is used to specify devices on which paging and swapping are to take place. The device or file used is given by the specialfile parameter. It may be of the form -L label or -U uuid to indicate a device by label or uuid. Calls to swapon normally occur in the system boot scripts making all swap devices available, so that the paging and swapping activity is interleaved across several devices and files. swapoff disables swapping on the specified devices and files. When the -a flag is given, swapping is disabled on all known swap devices and files (as found in /proc/swaps or /etc/fstab).
OPTIONS
-a, --all
All devices marked as ``swap'' in /etc/fstab are made available,
except for those with the ``noauto'' option. Devices that are
already being used as swap are silently skipped.
-d, --discard[=policy]
Enable swap discards, if the swap backing device supports the
discard or trim operation. This may improve performance on some
Solid State Devices, but often it does not. The option allows
one to select between two available swap discard policies:
--discard=once to perform a single-time discard operation for
the whole swap area at swapon; or --discard=pages to
asynchronously discard freed swap pages before they are
available for reuse. If no policy is selected, the default
behavior is to enable both discard types. The /etc/fstab mount
options discard, discard=once, or discard=pages may also be used
to enable discard flags.
-e, --ifexists
Silently skip devices that do not exist. The /etc/fstab mount
option nofail may also be used to skip non-existing device.
-f, --fixpgsz
Reinitialize (exec mkswap) the swap space if its page size does
not match that of the current running kernel. mkswap(2)
initializes the whole device and does not check for bad blocks.
-h, --help
Display help text and exit.
-L label
Use the partition that has the specified label. (For this,
access to /proc/partitions is needed.)
-o, --options opts
Specify swap options by an fstab-compatible comma-separated
string. For example:
swapon -o pri=1,discard=pages,nofail /dev/sda2
The opts string is evaluated last and overrides all other
command line options.
-p, --priority priority
Specify the priority of the swap device. priority is a value
between -1 and 32767. Higher numbers indicate higher priority.
See swapon(2) for a full description of swap priorities. Add
pri=value to the option field of /etc/fstab for use with swapon
-a. When no priority is defined, it defaults to -1.
-s, --summary
Display swap usage summary by device. Equivalent to "cat
/proc/swaps". Not available before Linux 2.1.25. This output
format is DEPRECATED in favour of --show that provides better
control on output data.
--show[=column...]
Display a definable table of swap areas. See the --help output
for a list of available columns.
--noheadings
Do not print headings when displaying --show output.
--raw Display --show output without aligning table columns.
--bytes
Display swap size in bytes in --show output instead of in user-
friendly units.
-U uuid
Use the partition that has the specified uuid.
-v, --verbose
Be verbose.
-V, --version
Display version information and exit.
NOTES
You should not use swapon on a file with holes. This can be seen in
the system log as
swapon: swapfile has holes.
The swap file implementation in the kernel expects to be able to write
to the file directly, without the assistance of the filesystem. This
is a problem on preallocated files (e.g. fallocate(1)) on filesystems
like XFS or ext4, and on copy-on-write filesystems like btrfs.
It is recommended to use dd(1) and /dev/zero to avoid holes on XFS and
ext4.
swapon may not work correctly when using a swap file with some versions
of btrfs. This is due to btrfs being a copy-on-write filesystem: the
file location may not be static and corruption can result. Btrfs
actively disallows the use of swap files on its filesystems by refusing
to map the file.
One possible workaround is to map the swap file to a loopback device.
This will allow the filesystem to determine the mapping properly but
may come with a performance impact.
Swap over NFS may not work.
swapon automatically detects and rewrites a swap space signature with
old software suspend data (e.g S1SUSPEND, S2SUSPEND, ...). The problem
is that if we don't do it, then we get data corruption the next time an
attempt at unsuspending is made.
ENVIRONMENT
LIBMOUNT_DEBUG=all
enables libmount debug output.
LIBBLKID_DEBUG=all
enables libblkid debug output.
SEE ALSO
swapon(2), swapoff(2), fstab(5), init(8), mkswap(8), rc(8), mount(8)
FILES
/dev/sd?? standard paging devices /etc/fstab ascii filesystem description table
HISTORY
The swapon command appeared in 4.0BSD.
AVAILABILITY
The swapon command is part of the util-linux package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
