semctl(2)
NAME
semctl - System V semaphore control operations
SYNOPSIS
#include <sys/types.h> #include <sys/ipc.h> #include <sys/sem.h> int semctl(int semid, int semnum, int cmd, ...);
DESCRIPTION
semctl() performs the control operation specified by cmd on the
System V semaphore set identified by semid, or on the semnum-th
semaphore of that set. (The semaphores in a set are numbered starting
at 0.)
This function has three or four arguments, depending on cmd. When
there are four, the fourth has the type union semun. The calling
program must define this union as follows:
union semun {
int val; /* Value for SETVAL */
struct semid_ds *buf; /* Buffer for IPC_STAT, IPC_SET */
unsigned short *array; /* Array for GETALL, SETALL */
struct seminfo *__buf; /* Buffer for IPC_INFO
(Linux-specific) */
};
The semid_ds data structure is defined in <sys/sem.h> as follows:
struct semid_ds {
struct ipc_perm sem_perm; /* Ownership and permissions */
time_t sem_otime; /* Last semop time */
time_t sem_ctime; /* Last change time */
unsigned long sem_nsems; /* No. of semaphores in set */
};
The ipc_perm structure is defined as follows (the highlighted fields
are settable using IPC_SET):
struct ipc_perm {
key_t __key; /* Key supplied to semget(2) */
uid_t uid; /* Effective UID of owner */
gid_t gid; /* Effective GID of owner */
uid_t cuid; /* Effective UID of creator */
gid_t cgid; /* Effective GID of creator */
unsigned short mode; /* Permissions */
unsigned short __seq; /* Sequence number */
};
Valid values for cmd are:
IPC_STAT Copy information from the kernel data structure associated
with semid into the semid_ds structure pointed to by arg.buf.
The argument semnum is ignored. The calling process must
have read permission on the semaphore set.
IPC_SET Write the values of some members of the semid_ds structure
pointed to by arg.buf to the kernel data structure associated
with this semaphore set, updating also its sem_ctime member.
The following members of the structure are updated:
sem_perm.uid, sem_perm.gid, and (the least significant 9 bits
of) sem_perm.mode. The effective UID of the calling process
must match the owner (sem_perm.uid) or creator
(sem_perm.cuid) of the semaphore set, or the caller must be
privileged. The argument semnum is ignored.
IPC_RMID Immediately remove the semaphore set, awakening all processes
blocked in semop(2) calls on the set (with an error return
and errno set to EIDRM). The effective user ID of the
calling process must match the creator or owner of the
semaphore set, or the caller must be privileged. The
argument semnum is ignored.
IPC_INFO (Linux-specific)
Return information about system-wide semaphore limits and
parameters in the structure pointed to by arg.__buf. This
structure is of type seminfo, defined in <sys/sem.h> if the
_GNU_SOURCE feature test macro is defined:
struct seminfo {
int semmap; /* Number of entries in semaphore
map; unused within kernel */
int semmni; /* Maximum number of semaphore sets */
int semmns; /* Maximum number of semaphores in all
semaphore sets */
int semmnu; /* System-wide maximum number of undo
structures; unused within kernel */
int semmsl; /* Maximum number of semaphores in a
set */
int semopm; /* Maximum number of operations for
semop(2) */
int semume; /* Maximum number of undo entries per
process; unused within kernel */
int semusz; /* Size of struct sem_undo */
int semvmx; /* Maximum semaphore value */
int semaem; /* Max. value that can be recorded for
semaphore adjustment (SEM_UNDO) */
};
The semmsl, semmns, semopm, and semmni settings can be
changed via /proc/sys/kernel/sem; see proc(5) for details.
SEM_INFO (Linux-specific)
Return a seminfo structure containing the same information as
for IPC_INFO, except that the following fields are returned
with information about system resources consumed by
semaphores: the semusz field returns the number of semaphore
sets that currently exist on the system; and the semaem field
returns the total number of semaphores in all semaphore sets
on the system.
SEM_STAT (Linux-specific)
Return a semid_ds structure as for IPC_STAT. However, the
semid argument is not a semaphore identifier, but instead an
index into the kernel's internal array that maintains
information about all semaphore sets on the system.
GETALL Return semval (i.e., the current value) for all semaphores of
the set into arg.array. The argument semnum is ignored. The
calling process must have read permission on the semaphore
set.
GETNCNT Return the value of semncnt for the semnum-th semaphore of
the set (i.e., the number of processes waiting for an
increase of semval for the semnum-th semaphore of the set).
The calling process must have read permission on the
semaphore set.
GETPID Return the value of sempid for the semnum-th semaphore of the
set. This is the PID of the process that last performed an
operation on that semaphore (but see NOTES). The calling
process must have read permission on the semaphore set.
GETVAL Return the value of semval for the semnum-th semaphore of the
set. The calling process must have read permission on the
semaphore set.
GETZCNT Return the value of semzcnt for the semnum-th semaphore of
the set (i.e., the number of processes waiting for semval of
the semnum-th semaphore of the set to become 0). The calling
process must have read permission on the semaphore set.
SETALL Set semval for all semaphores of the set using arg.array,
updating also the sem_ctime member of the semid_ds structure
associated with the set. Undo entries (see semop(2)) are
cleared for altered semaphores in all processes. If the
changes to semaphore values would permit blocked semop(2)
calls in other processes to proceed, then those processes are
woken up. The argument semnum is ignored. The calling
process must have alter (write) permission on the semaphore
set.
SETVAL Set the value of semval to arg.val for the semnum-th
semaphore of the set, updating also the sem_ctime member of
the semid_ds structure associated with the set. Undo entries
are cleared for altered semaphores in all processes. If the
changes to semaphore values would permit blocked semop(2)
calls in other processes to proceed, then those processes are
woken up. The calling process must have alter permission on
the semaphore set.
RETURN VALUE
On failure, semctl() returns -1 with errno indicating the error.
Otherwise, the system call returns a nonnegative value depending on cmd
as follows:
GETNCNT the value of semncnt.
GETPID the value of sempid.
GETVAL the value of semval.
GETZCNT the value of semzcnt.
IPC_INFO the index of the highest used entry in the kernel's internal
array recording information about all semaphore sets. (This
information can be used with repeated SEM_STAT operations to
obtain information about all semaphore sets on the system.)
SEM_INFO as for IPC_INFO.
SEM_STAT the identifier of the semaphore set whose index was given in
semid.
All other cmd values return 0 on success.
ERRORS
On failure, errno will be set to one of the following:
EACCES The argument cmd has one of the values GETALL, GETPID, GETVAL,
GETNCNT, GETZCNT, IPC_STAT, SEM_STAT, SETALL, or SETVAL and the
calling process does not have the required permissions on the
semaphore set and does not have the CAP_IPC_OWNER capability in
the user namespace that governs its IPC namespace.
EFAULT The address pointed to by arg.buf or arg.array isn't accessible.
EIDRM The semaphore set was removed.
EINVAL Invalid value for cmd or semid. Or: for a SEM_STAT operation,
the index value specified in semid referred to an array slot
that is currently unused.
EPERM The argument cmd has the value IPC_SET or IPC_RMID but the
effective user ID of the calling process is not the creator (as
found in sem_perm.cuid) or the owner (as found in sem_perm.uid)
of the semaphore set, and the process does not have the
CAP_SYS_ADMIN capability.
ERANGE The argument cmd has the value SETALL or SETVAL and the value to
which semval is to be set (for some semaphore of the set) is
less than 0 or greater than the implementation limit SEMVMX.
CONFORMING TO
POSIX.1-2001, POSIX.1-2008, SVr4. POSIX.1 specifies the sem_nsems field of the semid_ds structure as having the type unsigned short, and the field is so defined on most other systems. It was also so defined on Linux 2.2 and earlier, but, since Linux 2.4, the field has the type unsigned long.
NOTES
The inclusion of <sys/types.h> and <sys/ipc.h> isn't required on Linux or by any version of POSIX. However, some old implementations required the inclusion of these header files, and the SVID also documented their inclusion. Applications intended to be portable to such old systems may need to include these header files. The IPC_INFO, SEM_STAT and SEM_INFO operations are used by the ipcs(1) program to provide information on allocated resources. In the future these may modified or moved to a /proc filesystem interface. Various fields in a struct semid_ds were typed as short under Linux 2.2 and have become long under Linux 2.4. To take advantage of this, a recompilation under glibc-2.1.91 or later should suffice. (The kernel distinguishes old and new calls by an IPC_64 flag in cmd.) In some earlier versions of glibc, the semun union was defined in <sys/sem.h>, but POSIX.1 requires that the caller define this union. On versions of glibc where this union is not defined, the macro _SEM_SEMUN_UNDEFINED is defined in <sys/sem.h>. The following system limit on semaphore sets affects a semctl() call: SEMVMX Maximum value for semval: implementation dependent (32767). For greater portability, it is best to always call semctl() with four arguments. The sempid value POSIX.1 defines sempid as the "process ID of [the] last operation" on a semaphore, and explicitly notes that this value is set by a successful semop(2) call, with the implication that no other interface affects the sempid value. While some implementations conform to the behavior specified in POSIX.1, others do not. (The fault here probably lies with POSIX.1 inasmuch as it likely failed to capture the full range of existing implementation behaviors.) Various other implementations also update sempid for the other operations that update the value of a semaphore: the SETVAL and SETALL operations, as well as the semaphore adjustments performed on process termination as a consequence of the use of the SEM_UNDO flag (see semop(2)). Linux also updates sempid for SETVAL operations and semaphore adjustments. However, somewhat inconsistently, up to and including 4.5, Linux did not update sempid for SETALL operations. This was rectified in Linux 4.6.
SEE ALSO
ipc(2), semget(2), semop(2), capabilities(7), sem_overview(7), svipc(7)
COLOPHON
This page is part of release 4.09 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
