Linux Manual Pages

Free Software * Books

Source Code

Free Media

Linux

scan

NAME
SYNOPSIS
INTRODUCTION
DETAILS ON SCANNING
DIFFERENCES FROM ANSI SSCANF
EXAMPLES
SEE ALSO
KEYWORDS

___________________________

NAME

scan − Parse string using conversion specifiers in the style of sscanf

SYNOPSIS

scan string format ?varName varName ...? ___________________________

INTRODUCTION

This command parses substrings from an input string in a fashion similar to the ANSI C sscanf procedure and returns a count of the number of conversions performed, or -1 if the end of the input string is reached before any conversions have been performed. String gives the input to be parsed and format indicates how to parse it, using % conversion specifiers as in sscanf. Each varName gives the name of a variable; when a substring is scanned from string that matches a conversion specifier, the substring is assigned to the corresponding variable. If no varName variables are specified, then scan works in an inline manner, returning the data that would otherwise be stored in the variables as a list. In the inline case, an empty string is returned when the end of the input string is reached before any conversions have been performed.

DETAILS ON SCANNING

Scan operates by scanning string and format together. If the next character in format is a blank or tab then it matches any number of white space characters in string (including zero). Otherwise, if it is not a % character then it must match the next character of string. When a % is encountered in format, it indicates the start of a conversion specifier. A conversion specifier contains up to four fields after the %: a XPG3 position specifier (or a * to indicate the converted value is to be discarded instead of assigned to any variable); a number indicating a maximum substring width; a size modifier; and a conversion character. All of these fields are optional except for the conversion character. The fields that are present must appear in the order given above.

When scan finds a conversion specifier in format, it first skips any white-space characters in string (unless the conversion character is [ or c). Then it converts the next input characters according to the conversion specifier and stores the result in the variable given by the next argument to scan.

OPTIONAL POSITIONAL SPECIFIER
If the % is followed by a decimal number and a $, as in “%2$d”, then the variable to use is not taken from the next sequential argument. Instead, it is taken from the argument indicated by the number, where 1 corresponds to the first varName. If there are any positional specifiers in format then all of the specifiers must be positional. Every varName on the argument list must correspond to exactly one conversion specifier or an error is generated, or in the inline case, any position can be specified at most once and the empty positions will be filled in with empty strings.

OPTIONAL SIZE MODIFIER
The size modifier field is used only when scanning a substring into one of Tcl’s integer values. The size modifier field dictates the integer range acceptable to be stored in a variable, or, for the inline case, in a position in the result list. The syntactically valid values for the size modifier are h, L, l, and ll. The h size modifier value is equivalent to the absence of a size modifier in the the conversion specifier. Either one indicates the integer range to be stored is limited to the same range produced by the int() function of the expr command. The L size modifier is equivalent to the l size modifier. Either one indicates the integer range to be stored is limited to the same range produced by the wide() function of the expr command. The ll size modifier indicates that the integer range to be stored is unlimited.

MANDATORY CONVERSION CHARACTER
The following conversion characters are supported:

	d		The input substring must be a decimal integer. It is read in and the integer value is stored in the variable, truncated as required by the size modifier value.
	o		The input substring must be an octal integer. It is read in and the integer value is stored in the variable, truncated as required by the size modifier value.
	x or X		The input substring must be a hexadecimal integer. It is read in and the integer value is stored in the variable, truncated as required by the size modifier value.
	b		The input substring must be a binary integer. It is read in and the integer value is stored in the variable, truncated as required by the size modifier value.
	u		The input substring must be a decimal integer. The integer value is truncated as required by the size modifier value, and the corresponding unsigned value for that truncated range is computed and stored in the variable as a decimal string. The conversion makes no sense without reference to a truncation range, so the size modifier ll is not permitted in combination with conversion character u.
	i		The input substring must be an integer. The base (i.e. decimal, binary, octal, or hexadecimal) is determined in the same fashion as described in expr. The integer value is stored in the variable, truncated as required by the size modifier value.
	c		A single character is read in and its Unicode value is stored in the variable as an integer value. Initial white space is not skipped in this case, so the input substring may be a white-space character.
	s		The input substring consists of all the characters up to the next white-space character; the characters are copied to the variable.

e or f or g or E or G

The input substring must be a floating-point number consisting of an optional sign, a string of decimal digits possibly containing a decimal point, and an optional exponent consisting of an e or E followed by an optional sign and a string of decimal digits. It is read in and stored in the variable as a floating-point value.

[chars]

The input substring consists of one or more characters in chars. The matching string is stored in the variable. If the first character between the brackets is a ] then it is treated as part of chars rather than the closing bracket for the set. If chars contains a sequence of the form a−b then any character between a and b (inclusive) will match. If the first or last character between the brackets is a −, then it is treated as part of chars rather than indicating a range.

[^chars]

The input substring consists of one or more characters not in chars. The matching string is stored in the variable. If the character immediately following the ^ is a ] then it is treated as part of the set rather than the closing bracket for the set. If chars contains a sequence of the form a−b then any character between a and b (inclusive) will be excluded from the set. If the first or last character between the brackets is a −, then it is treated as part of chars rather than indicating a range value.

No input is consumed from the input string. Instead, the total number of characters scanned from the input string so far is stored in the variable.

The number of characters read from the input for a conversion is the largest number that makes sense for that particular conversion (e.g. as many decimal digits as possible for %d, as many octal digits as possible for %o, and so on). The input substring for a given conversion terminates either when a white-space character is encountered or when the maximum substring width has been reached, whichever comes first. If a * is present in the conversion specifier then no variable is assigned and the next scan argument is not consumed.

DIFFERENCES FROM ANSI SSCANF

The behavior of the scan command is the same as the behavior of the ANSI C sscanf procedure except for the following differences:

	[1]		%p conversion specifier is not supported.
	[2]		For %c conversions a single character value is converted to a decimal string, which is then assigned to the corresponding varName; no substring width may be specified for this conversion.
	[3]		The h modifier is always ignored and the l and L modifiers are ignored when converting real values (i.e. type double is used for the internal representation). The ll modifier has no sscanf counterpart.
	[4]		If the end of the input string is reached before any conversions have been performed and no variables are given, an empty string is returned.

EXAMPLES

Convert a UNICODE character to its numeric value:

set char "x"
set value [scan $char %c]

Parse a simple color specification of the form #RRGGBB using hexadecimal conversions with substring sizes:

set string "#08D03F"
scan $string "#%2x%2x%2x" r g b

Parse a HH:MM time string, noting that this avoids problems with octal numbers by forcing interpretation as decimals (if we did not care, we would use the %i conversion instead):

set string "08:08" ;# *Not* octal!
if {[scan $string "%d:%d" hours minutes] != 2} {
error "not a valid time string"
}
# We have to understand numeric ranges ourselves...
if {$minutes < 0 || $minutes > 59} {
error "invalid number of minutes"
}

Break a string up into sequences of non-whitespace characters (note the use of the %n conversion so that we get skipping over leading whitespace correct):

set string " a string {with braced words} + leading space "
set words {}
while {[scan $string %s%n word length] == 2} {
lappend words $word
set string [string range $string $length end]
}

Parse a simple coordinate string, checking that it is complete by looking for the terminating character explicitly:

set string "(5.2,-4e-2)"
# Note that the spaces before the literal parts of
# the scan pattern are significant, and that ")" is
# the Unicode character \u0029
if {
[scan $string " (%f ,%f %c" x y last] != 3
|| $last != 0x0029
} then {
error "invalid coordinate string"
}
puts "X=$x, Y=$y"

An interactive session demonstrating the truncation of integer values determined by size modifiers:

% set tcl_platform(wordSize)
4
% scan 20000000000000000000 %d
2147483647
% scan 20000000000000000000 %ld
9223372036854775807
% scan 20000000000000000000 %lld
20000000000000000000

KEYWORDS

conversion specifier, parse, scan

Opportunity

Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.

Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.

Free Software

Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.

Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.

Free Books

The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.

Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.

Education

Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.

Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.