S_TIME
S_TIME
NAMESYNOPSIS
DESCRIPTION
OPTIONS
NOTES
BUGS
SEE ALSO
NAME
s_time − SSL/TLS performance timing program
SYNOPSIS
openssl s_time [−connect host:port] [−www page] [−cert filename] [−key filename] [−CApath directory] [−CAfile filename] [−reuse] [−new] [−verify depth] [−nbio] [−time seconds] [−ssl2] [−ssl3] [−bugs] [−cipher cipherlist]
DESCRIPTION
The s_client command implements a generic SSL/TLS client which connects to a remote host using SSL/TLS. It can request a page from the server and includes the time to transfer the payload data in its timing measurements. It measures the number of connections within a given timeframe, the amount of data transferred (if any), and calculates the average time spent for one connection.
OPTIONS
−connect host:port
This specifies the host and optional port to connect to.
−www page
This specifies the page to GET from the server. A value of ’/’ gets the index.htm[l] page. If this parameter is not specified, then s_time will only perform the handshake to establish SSL connections but not transfer any payload data.
−cert certname
The certificate to use, if one is requested by the server. The default is not to use a certificate. The file is in PEM format.
−key keyfile
The private key to use. If not specified then the certificate file will be used. The file is in PEM format.
−verify depth
The verify depth to use. This specifies the maximum length of the server certificate chain and turns on server certificate verification. Currently the verify operation continues after errors so all the problems with a certificate chain can be seen. As a side effect the connection will never fail due to a server certificate verify failure.
−CApath directory
The directory to use for server certificate verification. This directory must be in "hash format", see verify for more information. These are also used when building the client certificate chain.
−CAfile file
A file containing trusted certificates to use during server authentication and to use when attempting to build the client certificate chain.
−new
performs the timing test using a new session ID for each connection. If neither −new nor −reuse are specified, they are both on by default and executed in sequence.
−reuse
performs the timing test using the same session ID ; this can be used as a test that session caching is working. If neither −new nor −reuse are specified, they are both on by default and executed in sequence.
−nbio
turns on non-blocking I/O.
−ssl2, −ssl3
these options disable the use of certain SSL or TLS protocols. By default the initial handshake uses a method which should be compatible with all servers and permit them to use SSL v3, SSL v2 or TLS as appropriate. The timing program is not as rich in options to turn protocols on and off as the s_client(1) program and may not connect to all servers.
Unfortunately there are a lot of ancient and broken servers in use which cannot handle this technique and will fail to connect. Some servers only work if TLS is turned off with the −ssl3 option; others will only support SSL v2 and may need the −ssl2 option.
−bugs
there are several known bug in SSL and TLS implementations. Adding this option enables various workarounds.
−cipher cipherlist
this allows the cipher list sent by the client to be modified. Although the server determines which cipher suite is used it should take the first supported cipher in the list sent by the client. See the ciphers(1) command for more information.
−time length
specifies how long (in seconds) s_time should establish connections and optionally transfer payload data from a server. Server and client performance and the link speed determine how many connections s_time can establish.
NOTES
s_client can be used to measure the performance of an SSL connection. To connect to an SSL HTTP server and get the default page the command
openssl s_time −connect servername:443 −www / −CApath yourdir −CAfile yourfile.pem −cipher commoncipher [−ssl3]
would typically be used (https uses port 443). ’commoncipher’ is a cipher to which both client and server can agree, see the ciphers(1) command for details.
If the handshake fails then there are several possible causes, if it is nothing obvious like no client certificate then the −bugs, −ssl2, −ssl3 options can be tried in case it is a buggy server. In particular you should play with these options before submitting a bug report to an OpenSSL mailing list.
A frequent problem when attempting to get client certificates working is that a web client complains it has no certificates or gives an empty list to choose from. This is normally because the server is not sending the clients certificate authority in its "acceptable CA list" when it requests a certificate. By using s_client(1) the CA list can be viewed and checked. However some servers only request client authentication after a specific URL is requested. To obtain the list in this case it is necessary to use the −prexit option of s_client(1) and send an HTTP request for an appropriate page.
If a certificate is specified on the command line using the −cert option it will not be used unless the server specifically requests a client certificate. Therefor merely including a client certificate on the command line is no guarantee that the certificate works.
BUGS
Because this program does not have all the options of the s_client(1) program to turn protocols on and off, you may not be able to measure the performance of all protocols with all servers.
The −verify option should really exit if the server verification fails.
SEE ALSO
s_client(1), s_server(1), ciphers(1)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
