route(8)
NAME
route - show / manipulate the IP routing table
SYNOPSIS
route [-CFvnNee] [-A family |-4|-6]
route [-v] [-A family |-4|-6] add [-net|-host] target [netmask Nm] [gw
Gw] [metric N] [mss M] [window W] [irtt I] [reject] [mod] [dyn]
[reinstate] [[dev] If]
route [-v] [-A family |-4|-6] del [-net|-host] target [gw Gw] [netmask
Nm] [metric M] [[dev] If]
route [-V] [--version] [-h] [--help]
DESCRIPTION
Route manipulates the kernel's IP routing tables. Its primary use is to set up static routes to specific hosts or networks via an interface after it has been configured with the ifconfig(8) program. When the add or del options are used, route modifies the routing tables. Without these options, route displays the current contents of the routing tables.
OPTIONS
-A family
use the specified address family (eg `inet'). Use route --help
for a full list. You can use -6 as an alias for --inet6 and -4
as an alias for -A inet
-F operate on the kernel's FIB (Forwarding Information Base)
routing table. This is the default.
-C operate on the kernel's routing cache.
-v select verbose operation.
-n show numerical addresses instead of trying to determine symbolic
host names. This is useful if you are trying to determine why
the route to your nameserver has vanished.
-e use netstat(8)-format for displaying the routing table. -ee
will generate a very long line with all parameters from the
routing table.
del delete a route.
add add a new route.
target the destination network or host. You can provide an addresses or
symbolic network or host name. Optionally you can use /prefixlen
notation instead of using the netmask option.
-net the target is a network.
-host the target is a host.
netmask NM
when adding a network route, the netmask to be used.
gw GW route packets via a gateway.
NOTE: The specified gateway must be reachable first. This
usually means that you have to set up a static route to the
gateway beforehand. If you specify the address of one of your
local interfaces, it will be used to decide about the interface
to which the packets should be routed to. This is a BSDism
compatibility hack.
metric M
set the metric field in the routing table (used by routing
daemons) to M. If this option is not specified the metric for
inet6 (IPv6) address family defaults to '1', for inet (IPv4) it
defaults to '0'. You should always specify an explicit metric
value to not rely on those defaults - they also differ from
iproute2.
mss M sets MTU (Maximum Transmission Unit) of the route to M bytes.
Note that the current implementation of the route command does
not allow the option to set the Maximum Segment Size (MSS).
window W
set the TCP window size for connections over this route to W
bytes. This is typically only used on AX.25 networks and with
drivers unable to handle back to back frames.
irtt I set the initial round trip time (irtt) for TCP connections over
this route to I milliseconds (1-12000). This is typically only
used on AX.25 networks. If omitted the RFC 1122 default of 300ms
is used.
reject install a blocking route, which will force a route lookup to
fail. This is for example used to mask out networks before
using the default route. This is NOT for firewalling.
mod, dyn, reinstate
install a dynamic or modified route. These flags are for
diagnostic purposes, and are generally only set by routing
daemons.
dev If force the route to be associated with the specified device, as
the kernel will otherwise try to determine the device on its own
(by checking already existing routes and device specifications,
and where the route is added to). In most normal networks you
won't need this.
If dev If is the last option on the command line, the word dev
may be omitted, as it's the default. Otherwise the order of the
route modifiers (metric netmask gw dev) doesn't matter.
EXAMPLES
route add -net 127.0.0.0 netmask 255.0.0.0 metric 1024 dev lo
adds the normal loopback entry, using netmask 255.0.0.0 and
associated with the "lo" device (assuming this device was
previously set up correctly with ifconfig(8)).
route add -net 192.56.76.0 netmask 255.255.255.0 metric 1024 dev eth0
adds a route to the local network 192.56.76.x via "eth0". The
word "dev" can be omitted here.
route del default
deletes the current default route, which is labeled "default" or
0.0.0.0 in the destination field of the current routing table.
route del -net 192.56.76.0 netmask 255.255.255.0
deletes the route. Since the Linux routing kernel uses classless
addressing, you pretty much always have to specify the netmask
that is same as as seen in 'route -n' listing.
route add default gw mango
adds a default route (which will be used if no other route
matches). All packets using this route will be gatewayed
through the address of a node named "mango". The device which
will actually be used for that route depends on how we can reach
"mango" - "mango" must be on directly reachable route.
route add mango sl0
Adds the route to the host named "mango" via the SLIP interface
(assuming that "mango" is the SLIP host).
route add -net 192.57.66.0 netmask 255.255.255.0 gw mango
This command adds the net "192.57.66.x" to be gatewayed through
the former route to the SLIP interface.
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
This is an obscure one documented so people know how to do it.
This sets all of the class D (multicast) IP routes to go via
"eth0". This is the correct normal configuration line with a
multicasting kernel.
route add -net 10.0.0.0 netmask 255.0.0.0 metric 1024 reject
This installs a rejecting route for the private network
"10.x.x.x."
route -6 add 2001:0002::/48 metric 1 dev eth0
This adds a IPv6 route with the specified metric to be directly
reachable via eth0.
OUTPUT
The output of the kernel routing table is organized in the following
columns
Destination
The destination network or destination host.
Gateway
The gateway address or '*' if none set.
Genmask
The netmask for the destination net; '255.255.255.255' for a
host destination and '0.0.0.0' for the default route.
Flags Possible flags include
U (route is up)
H (target is a host)
G (use gateway)
R (reinstate route for dynamic routing)
D (dynamically installed by daemon or redirect)
M (modified from routing daemon or redirect)
A (installed by addrconf)
C (cache entry)
! (reject route)
Metric The 'distance' to the target (usually counted in hops).
Ref Number of references to this route. (Not used in the Linux
kernel.)
Use Count of lookups for the route. Depending on the use of -F and
-C this will be either route cache misses (-F) or hits (-C).
Iface Interface to which packets for this route will be sent.
MSS Default maximum segment size for TCP connections over this
route.
Window Default window size for TCP connections over this route.
irtt Initial RTT (Round Trip Time). The kernel uses this to guess
about the best TCP protocol parameters without waiting on
(possibly slow) answers.
HH (cached only)
The number of ARP entries and cached routes that refer to the
hardware header cache for the cached route. This will be -1 if a
hardware address is not needed for the interface of the cached
route (e.g. lo).
Arp (cached only)
Whether or not the hardware address for the cached route is up
to date.
FILES
/proc/net/ipv6_route /proc/net/route /proc/net/rt_cache
SEE ALSO
ifconfig(8), netstat(8), arp(8), rarp(8), ip(8)
HISTORY
Route for Linux was originally written by Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> and then modified by Johannes Stille and Linus Torvalds for pl15. Alan Cox added the mss and window options for Linux 1.1.22. irtt support and merged with netstat from Bernd Eckenfels.
AUTHOR
Currently maintained by Phil Blundell <Philip.Blundell@pobox.com> and Bernd Eckenfels <net-tools@lina.inka.de>.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
