rlog(1)
NAME
rlog - print log messages and other information about RCS files
SYNOPSIS
rlog [ options ] file ...
DESCRIPTION
rlog prints information about RCS files. Filenames matching an RCS suffix denote RCS files; all others denote working files. Names are paired as explained in ci(1). rlog prints the following information for each RCS file: RCS file name, working file name, head (i.e., the number of the latest revision on the trunk), default branch, access list, locks, symbolic names, suffix, total number of revisions, number of revisions selected for printing, and descriptive text. This is followed by entries for the selected revisions in reverse chronological order for each branch. For each revision, rlog prints revision number, author, date/time, state, number of lines added/deleted (with respect to the previous revision), locker of the revision (if any), and log message. All times are displayed in Coordinated Universal Time (UTC) by default; this can be overridden with -z. Without options, rlog prints complete information. The options below restrict this output. -L Ignore RCS files that have no locks set. This is convenient in combination with -h, -l, and -R. -R Print only the name of the RCS file. This is convenient for translating a working file name into an RCS file name. -h Print only the RCS file name, working file name, head, default branch, access list, locks, symbolic names, and suffix. -t Print the same as -h, plus the descriptive text. -N Do not print the symbolic names. -b Print information about the revisions on the default branch, normally the highest branch on the trunk. -ddates Print information about revisions with a checkin date/time in the ranges given by the semicolon-separated list of dates. A range of the form d1<d2 or d2>d1 selects the revisions that were deposited between d1 and d2 exclusive. A range of the form <d or d> selects all revisions earlier than d. A range of the form d< or >d selects all revisions dated later than d. If < or > is followed by = then the ranges are inclusive, not exclusive. A range of the form d selects the single, latest revision dated d or earlier. The date/time strings d, d1, and d2 are in the free format explained in co(1). Quoting is normally necessary, especially for < and >. Note that the separator is a semicolon. -l[lockers] Print information about locked revisions only. In addition, if the comma-separated list lockers of login names is given, ignore all locks other than those held by the lockers. For example, rlog -L -R -lwft RCS/* prints the name of RCS files locked by the user wft. -r[revisions] prints information about revisions given in the comma-separated list revisions of revisions and ranges. A range rev1:rev2 means revisions rev1 to rev2 on the same branch, :rev means revisions from the beginning of the branch up to and including rev, and rev: means revisions starting with rev to the end of the branch containing rev. An argument that is a branch means all revisions on that branch. A range of branches means all revisions on the branches in that range. A branch followed by a . means the latest revision in that branch. A bare -r with no revisions means the latest revision on the default branch, normally the trunk. -sstates prints information about revisions whose state attributes match one of the states given in the comma-separated list states. -w[logins] prints information about revisions checked in by users with login names appearing in the comma-separated list logins. If logins is omitted, the user's login is assumed. -q This option has no effect; it is provided for consistency with other commands. -T This option has no effect; it is present for compatibility with other RCS commands. -V Print RCS's version number. -Vn Emulate RCS version n when generating logs. See co(1) for more. -xsuffixes Use suffixes to characterize RCS files. See ci(1) for details. rlog prints the intersection of the revisions selected with the options -d, -l, -s, and -w, intersected with the union of the revisions selected by -b and -r. -zzone specifies the date output format, and specifies the default time zone for date in the -ddates option. The zone should be empty, a numeric UTC offset, or the special string LT for local time. The default is an empty zone, which uses the traditional RCS format of UTC without any time zone indication and with slashes separating the parts of the date; otherwise, times are output in ISO 8601 format with time zone indication. For example, if local time is January 11, 1990, 8pm Pacific Standard Time, eight hours west of UTC, then the time is output as follows: option time output -z 1990/01/12 04:00:00 (default) -zLT 1990-01-11 20:00:00-08 -z+05:30 1990-01-12 09:30:00+05:30
EXAMPLES
rlog -L -R RCS/*
rlog -L -h RCS/*
rlog -L -l RCS/*
rlog RCS/*
The first command prints the names of all RCS files in the subdirectory
RCS that have locks. The second command prints the headers of those
files, and the third prints the headers plus the log messages of the
locked revisions. The last command prints complete information.
ENVIRONMENT
RCSINIT
Options prepended to the argument list, separated by spaces. A
backslash escapes spaces within an option. The RCSINIT options
are prepended to the argument lists of most RCS commands.
Useful RCSINIT options include -q, -V, -x, and -z.
RCS_MEM_LIMIT
Normally, for speed, commands either memory map or copy into
memory the RCS file if its size is less than the memory-limit,
currently defaulting to ``unlimited''. Otherwise (or if the
initially-tried speedy ways fail), the commands fall back to
using standard i/o routines. You can adjust the memory limit by
setting RCS_MEM_LIMIT to a numeric value lim (measured in
kilobytes). An empty value is silently ignored. As a side
effect, specifying RCS_MEM_LIMIT inhibits fall-back to slower
routines.
TMPDIR Name of the temporary directory. If not set, the environment
variables TMP and TEMP are inspected instead and the first value
found is taken; if none of them are set, a host-dependent
default is used, typically /tmp.
DIAGNOSTICS
The exit status is zero if and only if all operations were successful.
IDENTIFICATION
Author: Walter F. Tichy. Manual Page Revision: 5.9.4; Release Date: 2015-06-21. Copyright 2010-2015 Thien-Thi Nguyen. Copyright 1990, 1991, 1992, 1993, 1994, 1995 Paul Eggert. Copyright 1982, 1988, 1989 Walter F. Tichy.
SEE ALSO
ci(1), co(1), ident(1), rcs(1), rcsdiff(1), rcsmerge(1), rcsfile(5). Walter F. Tichy, RCS--A System for Version Control, Software--Practice & Experience 15, 7 (July 1985), 637-654. The full documentation for RCS is maintained as a Texinfo manual. If the info(1) and RCS programs are properly installed at your site, the command info rcs should give you access to the complete manual. Additionally, the RCS homepage: http://www.gnu.org/software/rcs/ has news and links to the latest release, development site, etc.
BUGS
The separator for revision ranges in the -r option used to be - instead of :, but this leads to confusion when symbolic names contain -. For backwards compatibility rlog -r still supports the old - separator, but it warns about this obsolete use.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
