renameat(2)
NAME
rename, renameat, renameat2 - change the name or location of a file
SYNOPSIS
#include <stdio.h>
int rename(const char *oldpath, const char *newpath);
#include <fcntl.h> /* Definition of AT_* constants */
#include <stdio.h>
int renameat(int olddirfd, const char *oldpath,
int newdirfd, const char *newpath);
int renameat2(int olddirfd, const char *oldpath,
int newdirfd, const char *newpath, unsigned int flags);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
renameat():
Since glibc 2.10:
_POSIX_C_SOURCE >= 200809L
Before glibc 2.10:
_ATFILE_SOURCE
DESCRIPTION
rename() renames a file, moving it between directories if required. Any other hard links to the file (as created using link(2)) are unaffected. Open file descriptors for oldpath are also unaffected. Various restrictions determine whether or not the rename operation succeeds: see ERRORS below. If newpath already exists, it will be atomically replaced, so that there is no point at which another process attempting to access newpath will find it missing. However, there will probably be a window in which both oldpath and newpath refer to the file being renamed. If oldpath and newpath are existing hard links referring to the same file, then rename() does nothing, and returns a success status. If newpath exists but the operation fails for some reason, rename() guarantees to leave an instance of newpath in place. oldpath can specify a directory. In this case, newpath must either not exist, or it must specify an empty directory. If oldpath refers to a symbolic link, the link is renamed; if newpath refers to a symbolic link, the link will be overwritten. renameat() The renameat() system call operates in exactly the same way as rename(), except for the differences described here. If the pathname given in oldpath is relative, then it is interpreted relative to the directory referred to by the file descriptor olddirfd (rather than relative to the current working directory of the calling process, as is done by rename() for a relative pathname). If oldpath is relative and olddirfd is the special value AT_FDCWD, then oldpath is interpreted relative to the current working directory of the calling process (like rename()). If oldpath is absolute, then olddirfd is ignored. The interpretation of newpath is as for oldpath, except that a relative pathname is interpreted relative to the directory referred to by the file descriptor newdirfd. See openat(2) for an explanation of the need for renameat(). renameat2() renameat2() has an additional flags argument. A renameat2() call with a zero flags argument is equivalent to renameat(). The flags argument is a bit mask consisting of zero or more of the following flags: RENAME_EXCHANGE Atomically exchange oldpath and newpath. Both pathnames must exist but may be of different types (e.g., one could be a non- empty directory and the other a symbolic link). RENAME_NOREPLACE Don't overwrite newpath of the rename. Return an error if newpath already exists. RENAME_NOREPLACE can't be employed together with RENAME_EXCHANGE. RENAME_WHITEOUT (since Linux 3.18) This operation makes sense only for overlay/union filesystem implementations. Specifying RENAME_WHITEOUT creates a "whiteout" object at the source of the rename at the same time as performing the rename. The whole operation is atomic, so that if the rename succeeds then the whiteout will also have been created. A "whiteout" is an object that has special meaning in union/overlay filesystem constructs. In these constructs, multiple layers exist and only the top one is ever modified. A whiteout on an upper layer will effectively hide a matching file in the lower layer, making it appear as if the file didn't exist. When a file that exists on the lower layer is renamed, the file is first copied up (if not already on the upper layer) and then renamed on the upper, read-write layer. At the same time, the source file needs to be "whiteouted" (so that the version of the source file in the lower layer is rendered invisible). The whole operation needs to be done atomically. When not part of a union/overlay, the whiteout appears as a character device with a {0,0} device number. RENAME_WHITEOUT requires the same privileges as creating a device node (i.e., the CAP_MKNOD capability). RENAME_WHITEOUT can't be employed together with RENAME_EXCHANGE. RENAME_WHITEOUT requires support from the underlying filesystem. Among the filesystems that provide that support are shmem (since Linux 3.18), ext4 (since Linux 3.18), and XFS (since Linux 4.1).
RETURN VALUE
On success, zero is returned. On error, -1 is returned, and errno is set appropriately.
ERRORS
EACCES Write permission is denied for the directory containing oldpath
or newpath, or, search permission is denied for one of the
directories in the path prefix of oldpath or newpath, or oldpath
is a directory and does not allow write permission (needed to
update the .. entry). (See also path_resolution(7).)
EBUSY The rename fails because oldpath or newpath is a directory that
is in use by some process (perhaps as current working directory,
or as root directory, or because it was open for reading) or is
in use by the system (for example as mount point), while the
system considers this an error. (Note that there is no
requirement to return EBUSY in such cases—there is nothing wrong
with doing the rename anyway—but it is allowed to return EBUSY
if the system cannot otherwise handle such situations.)
EDQUOT The user's quota of disk blocks on the filesystem has been
exhausted.
EFAULT oldpath or newpath points outside your accessible address space.
EINVAL The new pathname contained a path prefix of the old, or, more
generally, an attempt was made to make a directory a
subdirectory of itself.
EISDIR newpath is an existing directory, but oldpath is not a
directory.
ELOOP Too many symbolic links were encountered in resolving oldpath or
newpath.
EMLINK oldpath already has the maximum number of links to it, or it was
a directory and the directory containing newpath has the maximum
number of links.
ENAMETOOLONG
oldpath or newpath was too long.
ENOENT The link named by oldpath does not exist; or, a directory
component in newpath does not exist; or, oldpath or newpath is
an empty string.
ENOMEM Insufficient kernel memory was available.
ENOSPC The device containing the file has no room for the new directory
entry.
ENOTDIR
A component used as a directory in oldpath or newpath is not, in
fact, a directory. Or, oldpath is a directory, and newpath
exists but is not a directory.
ENOTEMPTY or EEXIST
newpath is a nonempty directory, that is, contains entries other
than "." and "..".
EPERM or EACCES
The directory containing oldpath has the sticky bit (S_ISVTX)
set and the process's effective user ID is neither the user ID
of the file to be deleted nor that of the directory containing
it, and the process is not privileged (Linux: does not have the
CAP_FOWNER capability); or newpath is an existing file and the
directory containing it has the sticky bit set and the process's
effective user ID is neither the user ID of the file to be
replaced nor that of the directory containing it, and the
process is not privileged (Linux: does not have the CAP_FOWNER
capability); or the filesystem containing pathname does not
support renaming of the type requested.
EROFS The file is on a read-only filesystem.
EXDEV oldpath and newpath are not on the same mounted filesystem.
(Linux permits a filesystem to be mounted at multiple points,
but rename() does not work across different mount points, even
if the same filesystem is mounted on both.)
The following additional errors can occur for renameat() and
renameat2():
EBADF olddirfd or newdirfd is not a valid file descriptor.
ENOTDIR
oldpath is relative and olddirfd is a file descriptor referring
to a file other than a directory; or similar for newpath and
newdirfd
The following additional errors can occur for renameat2():
EEXIST flags contains RENAME_NOREPLACE and newpath already exists.
EINVAL An invalid flag was specified in flags.
EINVAL Both RENAME_NOREPLACE and RENAME_EXCHANGE were specified in
flags.
EINVAL Both RENAME_WHITEOUT and RENAME_EXCHANGE were specified in
flags.
EINVAL The filesystem does not support one of the flags in flags.
ENOENT flags contains RENAME_EXCHANGE and newpath does not exist.
EPERM RENAME_WHITEOUT was specified in flags, but the caller does not
have the CAP_MKNOD capability.
VERSIONS
renameat() was added to Linux in kernel 2.6.16; library support was added to glibc in version 2.4. renameat2() was added to Linux in kernel 3.15.
CONFORMING TO
rename(): 4.3BSD, C89, C99, POSIX.1-2001, POSIX.1-2008. renameat(): POSIX.1-2008. renameat2() is Linux-specific.
NOTES
Glibc notes On older kernels where renameat() is unavailable, the glibc wrapper function falls back to the use of rename(). When oldpath and newpath are relative pathnames, glibc constructs pathnames based on the symbolic links in /proc/self/fd that correspond to the olddirfd and newdirfd arguments.
BUGS
On NFS filesystems, you can not assume that if the operation failed, the file was not renamed. If the server does the rename operation and then crashes, the retransmitted RPC which will be processed when the server is up again causes a failure. The application is expected to deal with this. See link(2) for a similar problem.
SEE ALSO
mv(1), chmod(2), link(2), symlink(2), unlink(2), path_resolution(7), symlink(7)
COLOPHON
This page is part of release 4.09 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
