qpidd(1)

NAME

   qpidd - the Qpid AMQP Message Broker Daemon

SYNOPSIS

   qpidd [-p port] [--config config_file] [--data-dir directory]

DESCRIPTION

   An AMQP message broker daemon that stores, routes and forwards messages
   using the Advanced Message Queueing Protocol (AMQP).

OPTIONS

   The options below are built-in  to  qpidd.  Installing  add-on  modules
   provides  additional  options. To see the full set of options available
   type "qpidd --help"

   Options may be specified via  command  line,  environment  variable  or
   configuration file. See FILES and ENVIRONMENT below for details.

   -h [ --help ]
          Displays the help message

   -v [ --version ]
          Displays version information

   --config FILE (/etc/qpidd.conf)
          Reads configuration from FILE

   Module options:
   --module-dir DIR (/usr/lib/qpid/daemon)
          Load all shareable modules in this directory

   --load-module FILE
          Specifies additional module(s) to be loaded

   --no-module-dir
          Don't load modules from module directory

   Broker Options:
   --data-dir DIR (/home/buildd/.qpidd)
          Directory to contain persistent data generated by the broker

   --no-data-dir
          Don't use a data directory.  No persistent configuration will be
          loaded or stored

   -p [ --port ] PORT (5672)
          Tells the broker to listen on PORT

   --worker-threads N (5)
          Sets the broker thread pool size

   --max-connections N (500)
          Sets the maximum allowed connections

   --connection-backlog N (10)
          Sets the connection backlog limit for the server socket

   -m [ --mgmt-enable ] yes|no (1)
          Enable Management

   --mgmt-publish yes|no (1)
          Enable Publish of Management Data ('no' implies query-only)

   --mgmt-qmf2 yes|no (1)
          Enable broadcast of management information over QMF v2

   --mgmt-qmf1 yes|no (1)
          Enable broadcast of management information over QMF v1

   --mgmt-pub-interval SECONDS (10)
          Management Publish Interval

   --queue-purge-interval SECONDS (600)
          Interval between attempts to purge  any  expired  messages  from
          queues

   --auth yes|no (1)
          Enable authentication, if disabled all incoming connections will
          be trusted

   --realm REALM (QPID)
          Use the given realm when performing authentication

   --default-queue-limit BYTES (104857600)
          Default maximum size for queues (in bytes)

   --tcp-nodelay
          Set TCP_NODELAY on TCP connections

   --require-encryption
          Only accept connections that are encrypted

   --known-hosts-url URL or 'none'
          URL to send as 'known-hosts' to clients  ('none'  implies  empty
          list)

   --sasl-config DIR
          gets sasl config info from nonstandard location

   --async-queue-events yes|no (0)
          Set Queue Events async, used for services like replication

   --default-flow-stop-threshold PERCENT (80)
          Percent  of  queue's  maximum  capacity at which flow control is
          activated.

   --default-flow-resume-threshold PERCENT (70)
          Percent of queue's maximum capacity at  which  flow  control  is
          de-activated.

   --default-event-threshold-ratio %age of limit (80)
          The ratio of any specified queue limit at which an event will be
          raised

   --default-message-group GROUP-IDENTIFER (qpid.no-group)
          Group identifier to assign to messages delivered  to  a  message
          group queue that do not contain an identifier.

   --enable-timestamp yes|no (0)
          Add current time to each received message.

   --link-maintenace-interval SECONDS (2)

   Logging options:
   -t [ --trace ]
          Enables all logging

   --log-enable RULE (notice+)
          Enables  logging  for selected levels and components. RULE is in
          the form 'LEVEL[+][:PATTERN]' Levels are one of:

   trace debug info notice warning error
          critical For example: '--log-enable warning+' logs all  warning,
          error  and critical messages.  '--log-enable debug:framing' logs
          debug messages from the framing namespace.  This option  can  be
          used multiple times

   --log-time yes|no (1)
          Include time in log messages

   --log-level yes|no (1)
          Include severity level in log messages

   --log-source yes|no (0)
          Include source file:line in log messages

   --log-thread yes|no (0)
          Include thread ID in log messages

   --log-function yes|no (0)
          Include function signature in log messages

   --log-hires-timestamp yes|no (0)
          Use hi-resolution timestamps in log messages

   --log-prefix STRING
          Prefix to append to all log messages

   Logging sink options:
   --log-to-stderr yes|no (1)
          Send logging output to stderr

   --log-to-stdout yes|no (0)
          Send logging output to stdout

   --log-to-file FILE
          Send log output to FILE.

   --log-to-syslog yes|no (0)
          Send logging output to syslog; customize using --syslog-name and
          --syslog-facility

   --syslog-name NAME (lt-qpidd)
          Name to use in syslog messages

   --syslog-facility LOG_XXX (LOG_DAEMON)
          Facility to use in syslog messages

   Daemon options:
   -d [ --daemon ]
          Run as a daemon. Logs to syslog by default in this mode.

   --transport TRANSPORT (tcp)
          The transport for which to return the port

   --pid-dir DIR (/home/buildd/.qpidd)
          Directory where port-specific PID file is stored

   -w [ --wait ] SECONDS (600)
          Sets the maximum wait time to  initialize  the  daemon.  If  the
          daemon fails to initialize, prints an error and returns 1

   -c [ --check ]
          Prints  the  daemon's  process ID to stdout and returns 0 if the
          daemon is running, otherwise returns 1

   -q [ --quit ]
          Tells the daemon to shut down

ENVIRONMENT

   QPID_<option>
          There is an environment variable for each option.

   The environment variable is the option name in uppercase, prefixed with
   QPID_  and  '.'  or '-' are replaced with '_'. Environment settings are
   over-ridden by command line settings. For example:

     export QPID_PORT=6000
     export QPID_MAX_CONNECTIONS=10
     export QPID_LOG_TO_FILE=/tmp/qpidd.log

FILES

   /etc/qpidd.conf
          Default configuration file.

   Configuration  file  settings  are  over-ridden  by  command  line   or
   environment   variable   settings.   '--config   <file>'   or   'export
   QPID_CONFIG=<file>' specifies an alternate file.

   Each line is a name=value pair. Blank lines and lines beginning with  #
   are ignored. For example:

     # My qpidd configuration file.
     port=6000
     max-connections=10
     log-to-file=/tmp/qpidd.log

AUTHOR

   The Apache Qpid Project, [email protected]

REPORTING BUGS

   Please report bugs to [email protected]

Opportunity

Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.

Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.

Free Software

Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.

Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.

Free Books

The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.

Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.

Education

Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.

Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.