pwritev(2)
NAME
readv, writev, preadv, pwritev, preadv2, pwritev2 - read or write data into multiple buffers
SYNOPSIS
#include <sys/uio.h>
ssize_t readv(int fd, const struct iovec *iov, int iovcnt);
ssize_t writev(int fd, const struct iovec *iov, int iovcnt);
ssize_t preadv(int fd, const struct iovec *iov, int iovcnt,
off_t offset);
ssize_t pwritev(int fd, const struct iovec *iov, int iovcnt,
off_t offset);
ssize_t preadv2(int fd, const struct iovec *iov, int iovcnt,
off_t offset, int flags);
ssize_t pwritev2(int fd, const struct iovec *iov, int iovcnt,
off_t offset, int flags);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
preadv(), pwritev():
Since glibc 2.19:
_DEFAULT_SOURCE
Glibc 2.19 and earlier:
_BSD_SOURCE
DESCRIPTION
The readv() system call reads iovcnt buffers from the file associated
with the file descriptor fd into the buffers described by iov ("scatter
input").
The writev() system call writes iovcnt buffers of data described by iov
to the file associated with the file descriptor fd ("gather output").
The pointer iov points to an array of iovec structures, defined in
<sys/uio.h> as:
struct iovec {
void *iov_base; /* Starting address */
size_t iov_len; /* Number of bytes to transfer */
};
The readv() system call works just like read(2) except that multiple
buffers are filled.
The writev() system call works just like write(2) except that multiple
buffers are written out.
Buffers are processed in array order. This means that readv()
completely fills iov[0] before proceeding to iov[1], and so on. (If
there is insufficient data, then not all buffers pointed to by iov may
be filled.) Similarly, writev() writes out the entire contents of
iov[0] before proceeding to iov[1], and so on.
The data transfers performed by readv() and writev() are atomic: the
data written by writev() is written as a single block that is not
intermingled with output from writes in other processes (but see
pipe(7) for an exception); analogously, readv() is guaranteed to read a
contiguous block of data from the file, regardless of read operations
performed in other threads or processes that have file descriptors
referring to the same open file description (see open(2)).
preadv() and pwritev()
The preadv() system call combines the functionality of readv() and
pread(2). It performs the same task as readv(), but adds a fourth
argument, offset, which specifies the file offset at which the input
operation is to be performed.
The pwritev() system call combines the functionality of writev() and
pwrite(2). It performs the same task as writev(), but adds a fourth
argument, offset, which specifies the file offset at which the output
operation is to be performed.
The file offset is not changed by these system calls. The file
referred to by fd must be capable of seeking.
preadv2() and pwritev2()
These system calls are similar to preadv() and pwritev() calls, but add
a fifth argument, flags, which modifies the behavior on a per-call
basis.
Unlike preadv() and pwritev(), if the offset argument is -1, then the
current file offset is used and updated.
The flags argument contains a bitwise OR of zero or more of the
following flags:
RWF_DSYNC (since Linux 4.7)
Provide a per-write equivalent of the O_DSYNC open(2) flag.
This flag is meaningful only for pwritev2(), and its effect
applies only to the data range written by the system call.
RWF_HIPRI (since Linux 4.6)
High priority read/write. Allows block-based filesystems to use
polling of the device, which provides lower latency, but may use
additional resources. (Currently, this feature is usable only
on a file descriptor opened using the O_DIRECT flag.)
RWF_SYNC (since Linux 4.7)
Provide a per-write equivalent of the O_SYNC open(2) flag. This
flag is meaningful only for pwritev2(), and its effect applies
only to the data range written by the system call.
RETURN VALUE
On success, readv(), preadv() and preadv2() return the number of bytes read; writev(), pwritev() and pwritev2() return the number of bytes written. Note that is not an error for a successful call to transfer fewer bytes than requested (see read(2) and write(2)). On error, -1 is returned, and errno is set appropriately.
ERRORS
The errors are as given for read(2) and write(2). Furthermore, preadv(), preadv2(), pwritev(), and pwritev2() can also fail for the same reasons as lseek(2). Additionally, the following errors are defined: EINVAL The sum of the iov_len values overflows an ssize_t value. EINVAL The vector count, iovcnt, is less than zero or greater than the permitted maximum. EINVAL An unknown flag is specified in flags.
VERSIONS
preadv() and pwritev() first appeared in Linux 2.6.30; library support was added in glibc 2.10. preadv2() and pwritev2() first appeared in Linux 4.6
CONFORMING TO
readv(), writev(): POSIX.1-2001, POSIX.1-2008, 4.4BSD (these system calls first appeared in 4.2BSD). preadv(), pwritev(): nonstandard, but present also on the modern BSDs. preadv2(), pwritev2(): nonstandard Linux extension.
NOTES
POSIX.1 allows an implementation to place a limit on the number of
items that can be passed in iov. An implementation can advertise its
limit by defining IOV_MAX in <limits.h> or at run time via the return
value from sysconf(_SC_IOV_MAX). On modern Linux systems, the limit is
1024. Back in Linux 2.0 days, this limit was 16.
C library/kernel differences
The raw preadv() and pwritev() system calls have call signatures that
differ slightly from that of the corresponding GNU C library wrapper
functions shown in the SYNOPSIS. The final argument, offset, is
unpacked by the wrapper functions into two arguments in the system
calls:
unsigned long pos_l, unsigned long pos
These arguments contain, respectively, the low order and high order 32
bits of offset.
Historical C library/kernel differences
To deal with the fact that IOV_MAX was so low on early versions of
Linux, the glibc wrapper functions for readv() and writev() did some
extra work if they detected that the underlying kernel system call
failed because this limit was exceeded. In the case of readv(), the
wrapper function allocated a temporary buffer large enough for all of
the items specified by iov, passed that buffer in a call to read(2),
copied data from the buffer to the locations specified by the iov_base
fields of the elements of iov, and then freed the buffer. The wrapper
function for writev() performed the analogous task using a temporary
buffer and a call to write(2).
The need for this extra effort in the glibc wrapper functions went away
with Linux 2.2 and later. However, glibc continued to provide this
behavior until version 2.10. Starting with glibc version 2.9, the
wrapper functions provide this behavior only if the library detects
that the system is running a Linux kernel older than version 2.6.18 (an
arbitrarily selected kernel version). And since glibc 2.20 (which
requires a minimum Linux kernel version of 2.6.32), the glibc wrapper
functions always just directly invoke the system calls.
It is not advisable to mix calls to readv() or writev(), which operate
on file descriptors, with the functions from the stdio library; the
results will be undefined and probably not what you want.
EXAMPLE
The following code sample demonstrates the use of writev():
char *str0 = "hello ";
char *str1 = "world\n";
struct iovec iov[2];
ssize_t nwritten;
iov[0].iov_base = str0;
iov[0].iov_len = strlen(str0);
iov[1].iov_base = str1;
iov[1].iov_len = strlen(str1);
nwritten = writev(STDOUT_FILENO, iov, 2);
SEE ALSO
pread(2), read(2), write(2)
COLOPHON
This page is part of release 4.09 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
