pmevent(1)
NAME
pmval, pmevent - arbitrary performance metrics value dumper
SYNOPSIS
pmval [-dgLrvz] [-A align] [-a archive] [-f N] [-h host] [-i instances] [-K spec] [-n pmnsfile] [-O offset] [-p port] [-S starttime] [-s samples] [-T endtime] [-t interval] [-U archive] [-w width] [-x pattern] [-Z timezone] metricname
DESCRIPTION
pmval prints current or archived values for the nominated performance metric. The metric of interest is named in the metricname argument, subject to instance qualification with the -i flag as described below. Unless directed to another host by the -h option, or to a set of archives by the -a or -U options, pmval will contact the Performance Metrics Collector Daemon (PMCD) on the local host to obtain the required information. The metricname argument may also be given in the metric specification syntax, as described in PCPIntro(1), where the source, metric and instance may all be included in the metricname, e.g. thathost:kernel.all.load["1 minute"]. When this format is used, none of the -h or -a or -U options may be specified. When using the metric specification syntax, the ``hostname'' @ is treated specially and causes pmval to use a local context to collect metrics from PMDAs on the local host without PMCD. Only some metrics are available in this mode. When processing a set of archives, pmval may relinquish its own timing control, and operate as a ``slave'' of a pmtime(1) process that uses a GUI dialog to provide timing control. In this case, either the -g option should be used to start pmval as the sole slave of a new pmtime(1) instance, or -p should be used to attach pmval to an existing pmtime(1) instance via the IPC channel identified by the port argument. The -S, -T, -O and -A options may be used to define a time window to restrict the samples retrieved, set an initial origin within the time window, or specify a ``natural'' alignment of the sample times; refer to PCPIntro(1) for a complete description of these options. The other options which control the source, timing and layout of the information reported by pmval are as follows: -a Performance metric values are retrieved from the set of Performance Co-Pilot (PCP) archive logs identified. The argument is a comma-separated list of names, each of which may be the base name of an archive or the name of a directory containing one or more archives. See also -U. -d When replaying from a set of archives, this option requests that the prevailing real-time delay be applied between samples (see -t) to effect a pause, rather than the default behaviour of replaying at full speed. -f Numbers are reported in ``fixed point'' notation, rather than the default scientific notation. Each number will be up to the column width determined by the default heuristics, else the -w option if specified, and include N digits after the decimal point. So, the options -f 3 -w 8 would produce numbers of the form 9999.999. A value of zero for N omits the decimal point and any fractional digits. -g Start pmval as the slave of a new pmtime(1) process for replay of archived performance data using the pmtime(1) graphical user interface. -h Current performance metric values are retrieved from the nominated host machine. -i instances is a list of one or more instance names for the nominated performance metric - just these instances will be retrieved and reported (the default is to report all instances). The list must be a single argument, with elements of the list separated by commas and/or white space. The instance name may be quoted with single (') or double (") quotes for those cases where the instance name contains white space or commas. Multiple -i options are allowed as an alternative way of specifying more than one instance of interest. As an example, the following are all equivalent: $ pmval -i "'1 minute','5 minute'" kernel.all.load $ pmval -i '"1 minute","5 minute"' kernel.all.load $ pmval -i "'1 minute' '5 minute'" kernel.all.load $ pmval -i "'1 minute'" -i "'5 minute'" kernel.all.load $ pmval 'localhost:kernel.all.load["1 minute","5 minute"]' -K When fetching metrics from a local context, the -K option may be used to control the DSO PMDAs that should be made accessible. The spec argument conforms to the syntax described in __pmSpecLocalPMDA(3). More than one -K option may be used. -n Normally pmval operates on the default Performance Metrics Name Space (PMNS), however if the -n option is specified an alternative namespace is loaded from the file pmnsfile. -p Attach pmval to an existing pmtime(1) time control process instance via the IPC channel identified by the port argument. This option is normally only used by other tools, e.g. pmchart(1), when they launch pmval with synchronized time control. -r Print raw values for cumulative counter metrics. Normally cumulative counter metrics are converted to rates. For example, disk transfers are reported as number of disk transfers per second during the preceding sample interval, rather than the raw value of number of disk transfers since the machine was booted. If you specify this option, the raw metric values are printed. -s The argument samples defines the number of samples to be retrieved and reported. If samples is 0 or -s is not specified, pmval will sample and report continuously (in real time mode) or until the end of the set of PCP archives (in archive mode). -t The default update interval may be set to something other than the default 1 second. The interval argument follows the syntax described in PCPIntro(1), and in the simplest form may be an unsigned integer (the implied units in this case are seconds). -U Performance metric values are retrieved from the set of Performance Co-Pilot (PCP) archive logs identified. The argument is a comma-separated list of names, each of which may be the base name of an archive or the name of a directory containing one or more archives. However, unlike -a every recorded value in the archive for the selected metric and instances is reported (so no interpolation mode, and the sample interval (-t option) is ignored. See also -a. At most one of the options -a and -U may be specified. -w Set the width of each column of output to be width columns. If not specified columns are wide enough to accommodate the largest value of the type being printed. -x The given pattern is sent to the performance metric domain agent for the requested metricname before any values are requested. This serves two purposes. Firstly, it provides a mechanism for server-side event filtering that is customisable for individual event streams. In addition, some performance metrics domain agents also use the PMCD store mechanism to provide a basic security model (e.g. for sensitive log files, only a client host with pmStore(3) access would be able to access the event stream). As pattern may be processed by regcomp(3) it should be a non-empty string. Use . (dot) for a "match all" pattern. -Z By default, pmval reports the time of day according to the local timezone on the system where pmval is run. The -Z option changes the timezone to timezone in the format of the environment variable TZ as described in environ(7). -z Change the reporting timezone to the local timezone at the host that is the source of the performance metrics, as identified via either the metricname or the -h or -a or -U options. The following symbols may occasionally appear, in place of a metric value, in pmval output: A question mark symbol (?) indicates that a value is no longer available for that metric instance. An exclamation mark (!) indicates that a 64-bit counter wrapped during the sample. The output from pmval is directed to standard output.
FILES
$PCP_VAR_DIR/pmns/*
default PMNS specification files
PCP ENVIRONMENT
Environment variables with the prefix PCP_ are used to parameterize the file and directory names used by PCP. On each installation, the file /etc/pcp.conf contains the local values for these variables. The $PCP_CONF variable may be used to specify an alternative configuration file, as described in pcp.conf(5).
SEE ALSO
PCPIntro(1), pmcd(1), pmchart(1), pmdumplog(1), pmdumptext(1), pminfo(1), pmlogger(1), pmrep(1), pmtime(1), PMAPI(3), pmStore(3), __pmSpecLocalPMDA(3), pcp.conf(5) and pcp.env(5).
DIAGNOSTICS
All are generated on standard error and are intended to be self- explanatory.
CAVEATS
By default, pmval attempts to display non-integer numeric values in a
way that does not distort the inherent precision (rarely more than 4
significant digits), and tries to maintain a tabular format in the
output. These goals are sometimes in conflict.
In the absence of the -f option (described above), the following table
describes the formats used for different ranges of numeric values for
any metric that is of type PM_TYPE_FLOAT or PM_TYPE_DOUBLE, or any
metric that has the semantics of a counter (for which pmval reports the
rate converted value):
Format Value Range
! No values available
9.999E-99 < 0.1
0.0 0
9.9999 > 0 and <= 0.9999
9.999 > 0.9999 and < 9.999
99.99 > 9.999 and < 99.99
999.9 > 99.99 and < 999.9
9999. > 999.9 and < 9999
9.999E+99 > 9999
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
