perl5201delta - what is new for perl v5.20.1
This document describes differences between the 5.20.0 release and the 5.20.1 release. If you are upgrading from an earlier release such as 5.18.0, first read perl5200delta, which describes differences between 5.18.0 and 5.20.0.
There are no changes intentionally incompatible with 5.20.0. If any exist, they are bugs, and we request that you submit a report. See "Reporting Bugs" below.
* An optimization to avoid problems with COW and deliberately overallocated PVs has been disabled because it interfered with another, more important, optimization, causing a slowdown on some platforms. [perl #121975] <https://rt.perl.org/Ticket/Display.html?id=121975> * Returning a string from a lexical variable could be slow in some cases. This has now been fixed. [perl #121977] <https://rt.perl.org/Ticket/Display.html?id=121977>
Updated Modules and Pragmata * Config::Perl::V has been upgraded from version 0.20 to 0.22. The list of Perl versions covered has been updated and some flaws in the parsing have been fixed. * Exporter has been upgraded from version 5.70 to 5.71. Illegal POD syntax in the documentation has been corrected. * ExtUtils::CBuilder has been upgraded from version 0.280216 to 0.280217. Android builds now link to both -lperl and $Config::Config{perllibs}. * File::Copy has been upgraded from version 2.29 to 2.30. The documentation now notes that "copy" will not overwrite read- only files. * Module::CoreList has been upgraded from version 3.11 to 5.020001. The list of Perl versions covered has been updated. * The PathTools module collection has been upgraded from version 3.47 to 3.48. Fallbacks are now in place when cross-compiling for Android and $Config::Config{sh} is not yet defined. [perl #121963] <https://rt.perl.org/Ticket/Display.html?id=121963> * PerlIO::via has been upgraded from version 0.14 to 0.15. A minor portability improvement has been made to the XS implementation. * Unicode::UCD has been upgraded from version 0.57 to 0.58. The documentation includes many clarifications and fixes. * utf8 has been upgraded from version 1.13 to 1.13_01. The documentation has some minor formatting improvements. * version has been upgraded from version 0.9908 to 0.9909. External libraries and Perl may have different ideas of what the locale is. This is problematic when parsing version strings if the locale's numeric separator has been changed. Version parsing has been patched to ensure it handles the locales correctly. [perl #121930] <https://rt.perl.org/Ticket/Display.html?id=121930>
Changes to Existing Documentation perlapi * "av_len" - Emphasize that this returns the highest index in the array, not the size of the array. [perl #120386] <https://rt.perl.org/Ticket/Display.html?id=120386> * Note that "SvSetSV" doesn't do set magic. * "sv_usepvn_flags" - Fix documentation to mention the use of "NewX" instead of "malloc". [perl #121869] <https://rt.perl.org/Ticket/Display.html?id=121869> * Clarify where "NUL" may be embedded or is required to terminate a string. perlfunc * Clarify the meaning of "-B" and "-T". * "-l" now notes that it will return false if symlinks aren't supported by the file system. [perl #121523] <https://rt.perl.org/Ticket/Display.html?id=121523> * Note that "each", "keys" and "values" may produce different orderings for tied hashes compared to other perl hashes. [perl #121404] <https://rt.perl.org/Ticket/Display.html?id=121404> * Note that "exec LIST" and "system LIST" may fall back to the shell on Win32. Only "exec PROGRAM LIST" and "system PROGRAM LIST" indirect object syntax will reliably avoid using the shell. This has also been noted in perlport. [perl #122046] <https://rt.perl.org/Ticket/Display.html?id=122046> * Clarify the meaning of "our". [perl #122132] <https://rt.perl.org/Ticket/Display.html?id=122132> perlguts * Explain various ways of modifying an existing SV's buffer. [perl #116925] <https://rt.perl.org/Ticket/Display.html?id=116925> perlpolicy * We now have a code of conduct for the p5p mailing list, as documented in "STANDARDS OF CONDUCT" in perlpolicy. perlre * The "/x" modifier has been clarified to note that comments cannot be continued onto the next line by escaping them. perlsyn * Mention the use of empty conditionals in "for"/"while" loops for infinite loops. perlxs * Added a discussion of locale issues in XS code.
The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see perldiag. Changes to Existing Diagnostics * Variable length lookbehind not implemented in regex m/%s/ Information about Unicode behaviour has been added.
* Building Perl no longer writes to the source tree when configured with Configure's -Dmksymlinks option. [perl #121585] <https://rt.perl.org/Ticket/Display.html?id=121585>
Platform-Specific Notes Android Build support has been improved for cross-compiling in general and for Android in particular. OpenBSD Corrected architectures and version numbers used in configuration hints when building Perl. Solaris c99 options have been cleaned up, hints look for solstudio as well as SUNWspro, and support for native "setenv" has been added. VMS An old bug in feature checking, mainly affecting pre-7.3 systems, has been fixed. Windows %I64d is now being used instead of %lld for MinGW.
* Added "sync_locale" in perlapi. Changing the program's locale should be avoided by XS code. Nevertheless, certain non-Perl libraries called from XS, such as "Gtk" do so. When this happens, Perl needs to be told that the locale has changed. Use this function to do so, before returning to Perl.
* A bug has been fixed where zero-length assertions and code blocks inside of a regex could cause "pos" to see an incorrect value. [perl #122460] <https://rt.perl.org/Ticket/Display.html?id=122460> * Using "s///e" on tainted utf8 strings could issue bogus "Malformed UTF-8 character (unexpected end of string)" warnings. This has now been fixed. [perl #122148] <https://rt.perl.org/Ticket/Display.html?id=122148> * "system" and friends should now work properly on more Android builds. Due to an oversight, the value specified through -Dtargetsh to Configure would end up being ignored by some of the build process. This caused perls cross-compiled for Android to end up with defective versions of "system", "exec" and backticks: the commands would end up looking for /bin/sh instead of /system/bin/sh, and so would fail for the vast majority of devices, leaving $! as "ENOENT". * Many issues have been detected by Coverity <http://www.coverity.com/> and fixed.
Perl 5.20.1 represents approximately 4 months of development since Perl 5.20.0 and contains approximately 12,000 lines of changes across 170 files from 36 authors. Excluding auto-generated files, documentation and release tools, there were approximately 2,600 lines of changes to 110 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.20.1: Aaron Crane, Abigail, Alberto Simes, Alexandr Ciornii, Alexandre (Midnite) Jousset, Andrew Fresh, Andy Dougherty, Brian Fraser, Chris 'BinGOs' Williams, Craig A. Berry, Daniel Dragan, David Golden, David Mitchell, H.Merijn Brand, James E Keenan, Jan Dubois, Jarkko Hietaniemi, John Peacock, kafka, Karen Etheridge, Karl Williamson, Lukas Mai, Matthew Horsfall, Michael Bunk, Peter Martini, Rafael Garcia-Suarez, Reini Urban, Ricardo Signes, Shirakata Kentaro, Smylers, Steve Hay, Thomas Sibley, Todd Rinaldo, Tony Cook, Vladimir Marek, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the AUTHORS file in the Perl source distribution.
If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at https://rt.perl.org/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the perlbug program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of "perl -V", will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN.
The Changes file for an explanation of how to view exhaustive details on what changed. The INSTALL file for how to build Perl. The README file for general stuff. The Artistic and Copying files for copyright information.
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.