passwdqc.conf(5)
NAME
passwdqc.conf --- libpasswdqc configuration file
DESCRIPTION
libpasswdqc is a simple password strength checking library. In addition
to checking regular passwords, it offers support for passphrases and can
provide randomly generated ones. A passwdqc.conf configuration file may
be used to override default libpasswdqc settings.
FORMAT
A passwdqc.conf file consists of 0 or more lines of the following format:
option=value
Empty lines and lines beginning with "#" are ignored. Whitespace
characters between the option, "=", and value are not allowed.
DIRECTIVE OPTIONS
config=FILE
Load the specified configuration FILE in the passwdqc.conf
format. This file may define any options described in this
manual, including load of yet another configuration file, but
loops are not allowed.
PASSWORD QUALITY CONTROL OPTIONS
min=N0,N1,N2,N3,N4
(default: min=disabled,24,11,8,7) The minimum allowed password
lengths for different kinds of passwords/passphrases. The
keyword disabled can be used to disallow passwords of a given
kind regardless of their length. Each subsequent number is
required to be no larger than the preceding one.
N0 is used for passwords consisting of characters from one
character class only. The character classes are: digits, lower-
case letters, upper-case letters, and other characters. There is
also a special class for non-ASCII characters, which could not be
classified, but are assumed to be non-digits.
N1 is used for passwords consisting of characters from two
character classes that do not meet the requirements for a
passphrase.
N2 is used for passphrases. Note that besides meeting this
length requirement, a passphrase must also consist of a
sufficient number of words (see the passphrase option below).
N3 and N4 are used for passwords consisting of characters from
three and four character classes, respectively.
When calculating the number of character classes, upper-case
letters used as the first character and digits used as the last
character of a password are not counted.
In addition to being sufficiently long, passwords are required to
contain enough different characters for the character classes and
the minimum length they have been checked against.
max=N (default: max=40) The maximum allowed password length. This can
be used to prevent users from setting passwords that may be too
long for some system services. The value 8 is treated specially:
if max is set to 8, passwords longer than 8 characters will not
be rejected, but will be truncated to 8 characters for the
strength checks and the user will be warned. This is to be used
with the traditional DES-based password hashes, which truncate
the password at 8 characters.
It is important that you do set max=8 if you are using the
traditional hashes, or some weak passwords will pass the checks.
passphrase=N
(default: passphrase=3) The number of words required for a
passphrase, or 0 to disable the support for user-chosen
passphrases.
match=N
(default: match=4) The length of common substring required to
conclude that a password is at least partially based on
information found in a character string, or 0 to disable the
substring search. Note that the password will not be rejected
once a weak substring is found; it will instead be subjected to
the usual strength requirements with the weak substring partially
discounted.
The substring search is case-insensitive and is able to detect
and remove a common substring spelled backwards.
similar=permit|deny
(default: similar=deny) Whether a new password is allowed to be
similar to the old one. The passwords are considered to be
similar when there is a sufficiently long common substring and
the new password with the substring partially discounted would be
weak.
random=N[,only]
(default: random=47) The size of randomly-generated passphrases
in bits (24 to 85), or 0 to disable this feature. Any passphrase
that contains the offered randomly-generated string will be
allowed regardless of other possible restrictions.
The only modifier can be used to disallow user-chosen passwords.
PAM MODULE OPTIONS
enforce=none|users|everyone
(default: enforce=everyone) The PAM module can be configured to
warn of weak passwords only, but not actually enforce strong
passwords. The users setting will enforce strong passwords for
invocations by non-root users only.
non-unix
Normally, the PAM module uses getpwnam(3) to obtain the user's
personal login information and use that during the password
strength checks. This behavior can be disabled with the non-unix
option.
retry=N
(default: retry=3) The number of times the PAM module will ask
for a new password if the user fails to provide a sufficiently
strong password and enter it twice the first time.
ask_oldauthtok[=update]
Ask for the old password as well. Normally, the PAM module
leaves this task for subsequent modules. With no argument, the
ask_oldauthtok option will cause the PAM module to ask for the
old password during the preliminary check phase. If the
ask_oldauthtok option is specified with the update argument, the
PAM module will do that during the update phase.
check_oldauthtok
This tells the PAM module to validate the old password before
giving a new password prompt. Normally, this task is left for
subsequent modules.
The primary use for this option is when ask_oldauthtok=update is
also specified, in which case no other module gets a chance to
ask for and validate the password. Of course, this will only
work with UNIX passwords.
use_first_pass, use_authtok
Use the new password obtained by other modules stacked before the
PAM module. This disables user interaction within the PAM
module. The only difference between use_first_pass and
use_authtok is that the former is incompatible with
ask_oldauthtok.
FILES
/etc/passwdqc.conf.
SEE ALSO
getpwnam(3), pam_passwdqc(8).
http://www.openwall.com/passwdqc/
AUTHORS
The pam_passwdqc module was written for Openwall GNU/*/Linux by Solar
Designer solar at openwall.com. This manual page was derived from
pam_passwdqc(8). The latter, derived from the author's documentation, was
written for the FreeBSD Project by ThinkSec AS and NAI Labs, the Security
Research Division of Network Associates, Inc. under DARPA/SPAWAR contract
N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS research program.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
