open(3tcl)
NAME
open - Open a file-based or command pipeline channel
SYNOPSIS
open fileName open fileName access open fileName access permissions ______________________________________________________________________________
DESCRIPTION
This command opens a file, serial port, or command pipeline and returns
a channel identifier that may be used in future invocations of commands
like read, puts, and close. If the first character of fileName is not
| then the command opens a file: fileName gives the name of the file to
open, and it must conform to the conventions described in the filename
manual entry.
The access argument, if present, indicates the way in which the file
(or command pipeline) is to be accessed. In the first form access may
have any of the following values:
r Open the file for reading only; the file must already
exist. This is the default value if access is not
specified.
r+ Open the file for both reading and writing; the file
must already exist.
w Open the file for writing only. Truncate it if it
exists. If it does not exist, create a new file.
w+ Open the file for reading and writing. Truncate it if
it exists. If it does not exist, create a new file.
a Open the file for writing only. If the file does not
exist, create a new empty file. Set the file pointer to
the end of the file prior to each write.
a+ Open the file for reading and writing. If the file does
not exist, create a new empty file. Set the initial
access position to the end of the file.
All of the legal access values above may have the character b added as
the second or third character in the value to indicate that the opened
channel should be configured with the -translation binary option,
making the channel suitable for reading or writing of binary data.
In the second form, access consists of a list of any of the following
flags, all of which have the standard POSIX meanings. One of the flags
must be either RDONLY, WRONLY or RDWR.
RDONLY Open the file for reading only.
WRONLY Open the file for writing only.
RDWR Open the file for both reading and writing.
APPEND Set the file pointer to the end of the file prior to
each write.
BINARY
Configure the opened channel with the -translation
binary option.
CREAT Create the file if it does not already exist (without
this flag it is an error for the file not to exist).
EXCL If CREAT is also specified, an error is returned if the
file already exists.
NOCTTY If the file is a terminal device, this flag prevents the
file from becoming the controlling terminal of the
process.
NONBLOCK Prevents the process from blocking while opening the
file, and possibly in subsequent I/O operations. The
exact behavior of this flag is system- and device-
dependent; its use is discouraged (it is better to use
the fconfigure command to put a file in nonblocking
mode). For details refer to your system documentation
on the open system call's O_NONBLOCK flag.
TRUNC If the file exists it is truncated to zero length.
If a new file is created as part of opening it, permissions (an
integer) is used to set the permissions for the new file in conjunction
with the process's file mode creation mask. Permissions defaults to
0666.
COMMAND PIPELINES
If the first character of fileName is "|" then the remaining characters of fileName are treated as a list of arguments that describe a command pipeline to invoke, in the same style as the arguments for exec. In this case, the channel identifier returned by open may be used to write to the command's input pipe or read from its output pipe, depending on the value of access. If write-only access is used (e.g. access is w), then standard output for the pipeline is directed to the current standard output unless overridden by the command. If read-only access is used (e.g. access is r), standard input for the pipeline is taken from the current standard input unless overridden by the command. The id of the spawned process is accessible through the pid command, using the channel id returned by open as argument. If the command (or one of the commands) executed in the command pipeline returns an error (according to the definition in exec), a Tcl error is generated when close is called on the channel unless the pipeline is in non-blocking mode then no exit status is returned (a silent close with -blocking 0). It is often useful to use the fileevent command with pipelines so other processing may happen at the same time as running the command in the background.
SERIAL COMMUNICATIONS
If fileName refers to a serial port, then the specified serial port is
opened and initialized in a platform-dependent manner. Acceptable
values for the fileName to use to open a serial port are described in
the PORTABILITY ISSUES section.
The fconfigure command can be used to query and set additional
configuration options specific to serial ports (where supported):
-mode baud,parity,data,stop
This option is a set of 4 comma-separated values: the baud rate,
parity, number of data bits, and number of stop bits for this
serial port. The baud rate is a simple integer that specifies
the connection speed. Parity is one of the following letters:
n, o, e, m, s; respectively signifying the parity options of
"none", "odd", "even", "mark", or "space". Data is the number
of data bits and should be an integer from 5 to 8, while stop is
the number of stop bits and should be the integer 1 or 2.
-handshake type
(Windows and Unix). This option is used to setup automatic
handshake control. Note that not all handshake types maybe
supported by your operating system. The type parameter is case-
independent.
If type is none then any handshake is switched off. rtscts
activates hardware handshake. Hardware handshake signals are
described below. For software handshake xonxoff the handshake
characters can be redefined with -xchar. An additional hardware
handshake dtrdsr is available only under Windows. There is no
default handshake configuration, the initial value depends on
your operating system settings. The -handshake option cannot be
queried.
-queue (Windows and Unix). The -queue option can only be queried. It
returns a list of two integers representing the current number
of bytes in the input and output queue respectively.
-timeout msec
(Windows and Unix). This option is used to set the timeout for
blocking read operations. It specifies the maximum interval
between the reception of two bytes in milliseconds. For Unix
systems the granularity is 100 milliseconds. The -timeout
option does not affect write operations or nonblocking reads.
This option cannot be queried.
-ttycontrol {signal boolean signal boolean ...}
(Windows and Unix). This option is used to setup the handshake
output lines (see below) permanently or to send a BREAK over the
serial line. The signal names are case-independent. {RTS 1 DTR
0} sets the RTS output to high and the DTR output to low. The
BREAK condition (see below) is enabled and disabled with {BREAK
1} and {BREAK 0} respectively. It is not a good idea to change
the RTS (or DTR) signal with active hardware handshake rtscts
(or dtrdsr). The result is unpredictable. The -ttycontrol
option cannot be queried.
-ttystatus
(Windows and Unix). The -ttystatus option can only be queried.
It returns the current modem status and handshake input signals
(see below). The result is a list of signal,value pairs with a
fixed order, e.g. {CTS 1 DSR 0 RING 1 DCD 0}. The signal names
are returned upper case.
-xchar {xonChar xoffChar}
(Windows and Unix). This option is used to query or change the
software handshake characters. Normally the operating system
default should be DC1 (0x11) and DC3 (0x13) representing the
ASCII standard XON and XOFF characters.
-pollinterval msec
(Windows only). This option is used to set the maximum time
between polling for fileevents. This affects the time interval
between checking for events throughout the Tcl interpreter (the
smallest value always wins). Use this option only if you want
to poll the serial port more or less often than 10 msec (the
default).
-sysbuffer inSize
-sysbuffer {inSize outSize}
(Windows only). This option is used to change the size of
Windows system buffers for a serial channel. Especially at
higher communication rates the default input buffer size of 4096
bytes can overrun for latent systems. The first form specifies
the input buffer size, in the second form both input and output
buffers are defined.
-lasterror
(Windows only). This option is query only. In case of a serial
communication error, read or puts returns a general Tcl file I/O
error. fconfigure -lasterror can be called to get a list of
error details. See below for an explanation of the various
error codes.
SERIAL PORT SIGNALS
RS-232 is the most commonly used standard electrical interface for
serial communications. A negative voltage (-3V..-12V) define a mark
(on=1) bit and a positive voltage (+3..+12V) define a space (off=0) bit
(RS-232C). The following signals are specified for incoming and
outgoing data, status lines and handshaking. Here we are using the
terms workstation for your computer and modem for the external device,
because some signal names (DCD, RI) come from modems. Of course your
external device may use these signal lines for other purposes.
TXD(output)
Transmitted Data: Outgoing serial data.
RXD(input)
Received Data:Incoming serial data.
RTS(output)
Request To Send: This hardware handshake line informs the modem
that your workstation is ready to receive data. Your workstation
may automatically reset this signal to indicate that the input
buffer is full.
CTS(input)
Clear To Send: The complement to RTS. Indicates that the modem
is ready to receive data.
DTR(output)
Data Terminal Ready: This signal tells the modem that the
workstation is ready to establish a link. DTR is often enabled
automatically whenever a serial port is opened.
DSR(input)
Data Set Ready: The complement to DTR. Tells the workstation
that the modem is ready to establish a link.
DCD(input)
Data Carrier Detect: This line becomes active when a modem
detects a "Carrier" signal.
RI(input)
Ring Indicator: Goes active when the modem detects an incoming
call.
BREAK A BREAK condition is not a hardware signal line, but a logical
zero on the TXD or RXD lines for a long period of time, usually
250 to 500 milliseconds. Normally a receive or transmit data
signal stays at the mark (on=1) voltage until the next character
is transferred. A BREAK is sometimes used to reset the
communications line or change the operating mode of
communications hardware.
ERROR CODES (Windows only)
A lot of different errors may occur during serial read operations or
during event polling in background. The external device may have been
switched off, the data lines may be noisy, system buffers may overrun
or your mode settings may be wrong. That is why a reliable software
should always catch serial read operations. In cases of an error Tcl
returns a general file I/O error. Then fconfigure -lasterror may help
to locate the problem. The following error codes may be returned.
RXOVER Windows input buffer overrun. The data comes faster than your
scripts reads it or your system is overloaded. Use fconfigure
-sysbuffer to avoid a temporary bottleneck and/or make your
script faster.
TXFULL Windows output buffer overrun. Complement to RXOVER. This
error should practically not happen, because Tcl cares about
the output buffer status.
OVERRUN UART buffer overrun (hardware) with data lost. The data
comes faster than the system driver receives it. Check your
advanced serial port settings to enable the FIFO (16550)
buffer and/or setup a lower(1) interrupt threshold value.
RXPARITY A parity error has been detected by your UART. Wrong parity
settings with fconfigure -mode or a noisy data line (RXD) may
cause this error.
FRAME A stop-bit error has been detected by your UART. Wrong mode
settings with fconfigure -mode or a noisy data line (RXD) may
cause this error.
BREAK A BREAK condition has been detected by your UART (see above).
PORTABILITY ISSUES
Windows
Valid values for fileName to open a serial port are of the form
comX, where X is a number, generally from 1 to 9. A legacy form
accepted as well is comX:. This notation only works for serial
ports from 1 to 9. An attempt to open a serial port that does
not exist or has a number greater than 9 will fail. An
alternate form of opening serial ports is to use the filename
//./comX, where X is any number that corresponds to a serial
port.
When running Tcl interactively, there may be some strange
interactions between the real console, if one is present, and a
command pipeline that uses standard input or output. If a
command pipeline is opened for reading, some of the lines
entered at the console will be sent to the command pipeline and
some will be sent to the Tcl evaluator. If a command pipeline
is opened for writing, keystrokes entered into the console are
not visible until the pipe is closed. These problems only occur
because both Tcl and the child application are competing for the
console at the same time. If the command pipeline is started
from a script, so that Tcl is not accessing the console, or if
the command pipeline does not use standard input or output, but
is redirected from or to a file, then the above problems do not
occur.
Unix
Valid values for fileName to open a serial port are generally of
the form /dev/ttyX, where X is a or b, but the name of any
pseudo-file that maps to a serial port may be used. Advanced
configuration options are only supported for serial ports when
Tcl is built to use the POSIX serial interface.
When running Tcl interactively, there may be some strange
interactions between the console, if one is present, and a
command pipeline that uses standard input. If a command
pipeline is opened for reading, some of the lines entered at the
console will be sent to the command pipeline and some will be
sent to the Tcl evaluator. This problem only occurs because
both Tcl and the child application are competing for the console
at the same time. If the command pipeline is started from a
script, so that Tcl is not accessing the console, or if the
command pipeline does not use standard input, but is redirected
from a file, then the above problem does not occur.
See the PORTABILITY ISSUES section of the exec command for additional
information not specific to command pipelines about executing
applications on the various platforms
EXAMPLE
Open a command pipeline and catch any errors:
set fl [open "| ls this_file_does_not_exist"]
set data [read $fl]
if {[catch {close $fl} err]} {
puts "ls command failed: $err"
}
SEE ALSO
file(3tcl), close(3tcl), filename(3tcl), fconfigure(3tcl), gets(3tcl), read(3tcl), puts(3tcl), exec(3tcl), pid(3tcl), fopen(3)
KEYWORDS
access mode, append, create, file, non-blocking, open, permissions, pipeline, process, serial
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
