nanorc(5)
NAME
nanorc - GNU nano's configuration file
DESCRIPTION
The nanorc file contains the default settings for nano, a small and friendly editor. The file should be in Unix format, not in DOS or Mac format. During startup, nano will first read the system-wide settings, from /etc/nanorc (the exact path might be different), and then the user-specific settings, from ~/.nanorc.
OPTIONS
The configuration file accepts a series of set and unset commands,
which can be used to configure nano on startup without using command-
line options. Additionally, there are some commands to define syntax
highlighting and to rebind keys -- see the two separate sections on
those. nano reads one command per line.
Options in nanorc files take precedence over nano's defaults, and
command-line options override nanorc settings. Also, options that do
not take an argument are unset by default. So using the unset command
is only needed when wanting to override a setting of the system's
nanorc file in your own ~/.nanorc. Options that take an argument
cannot be unset.
Below, the string parameters need to be enclosed in double quotes.
Quotes inside these string parameters don't have to be escaped with
backslashes. The last double quote in the string will be treated as
its end. For example, for the brackets option, ""')>]}" will match ",
', ), >, ], and }.
The supported commands and arguments are:
set allow_insecure_backup
When backing up files, allow the backup to succeed even if its
permissions can't be (re)set due to special OS considerations. You
should NOT enable this option unless you are sure you need it.
set autoindent
Use auto-indentation.
set backup
When saving a file, create a backup file by adding a tilde (~) to
the file's name.
set backupdir directory
Make and keep not just one backup file, but make and keep a uniquely
numbered one every time a file is saved --- when backups are enabled
with set backup or --backup or -B. The uniquely numbered files are
stored in the specified directory.
set backwards
Do backwards searches by default.
set boldtext
Use bold instead of reverse video for the titlebar, statusbar, key
combos, and selected text. This can be overridden for the first
three by setting the options titlecolor, statuscolor, and keycolor.
set brackets string
Set the characters treated as closing brackets when justifying
paragraphs. This may not include blank characters. Only closing
punctuation (see punct), optionally followed by the specified
closing brackets, can end sentences. The default value is ""')>]}".
set casesensitive
Do case-sensitive searches by default.
set constantshow
Constantly display the cursor position in the status bar. (The old
form of this option, 'set const', is deprecated.)
set cut
Use cut-to-end-of-line by default, instead of cutting the whole
line.
set fill number
Hard-wrap lines at column number number. If number is 0 or less,
the maximum line length will be the screen width less number
columns. The default value is -8.
set functioncolor fgcolor,bgcolor
Specify the color combination to use for the function descriptions
in the two help lines at the bottom of the screen. See set
titlecolor for more details.
set historylog
Enable the use of ~/.nano/search_history for saving and reading
search/replace strings.
set justifytrim
When justifying text, trailing whitespace will automatically be
removed.
set keycolor fgcolor,bgcolor
Specify the color combination to use for the shortcut key combos in
the two help lines at the bottom of the screen. See set titlecolor
for more details.
set linenumbers
Display line numbers to the left of the text area.
set locking
Enable vim-style lock-files for when editing files.
set matchbrackets string
Set the opening and closing brackets that can be found by bracket
searches. This may not include blank characters. The opening set
must come before the closing set, and the two sets must be in the
same order. The default value is "(<[{)>]}".
set morespace
Use the blank line below the titlebar as extra editing space.
set mouse
Enable mouse support, if available for your system. When enabled,
mouse clicks can be used to place the cursor, set the mark (with a
double click), and execute shortcuts. The mouse will work in the X
Window System, and on the console when gpm is running. Text can
still be selected through dragging by holding down the Shift key.
set multibuffer
When reading in a file with ^R, insert it into a new buffer by
default.
set noconvert
Don't convert files from DOS/Mac format.
set nohelp
Don't display the two help lines at the bottom of the screen.
set nonewlines
Don't automatically add a newline to the ends of files.
set nowrap
Don't hard-wrap text at all.
set numbercolor fgcolor,bgcolor
Specify the color combination to use for line numbers. See set
titlecolor for more details.
set operatingdir directory
nano will only read and write files inside directory and its
subdirectories. Also, the current directory is changed to here, so
files are inserted from this directory. By default, the operating
directory feature is turned off.
set positionlog
Save the cursor position of files between editing sessions. The
cursor position is remembered for the 200 most-recently edited
files. (The old form of this option, 'set poslog', is deprecated.)
set preserve
Preserve the XON and XOFF keys (^Q and ^S).
set punct string
Set the characters treated as closing punctuation when justifying
paragraphs. This may not include blank characters. Only the
specfified closing punctuation, optionally followed by closing
brackets (see brackets), can end sentences. The default value is
"!.?".
set quickblank
Do quick statusbar blanking. Statusbar messages will disappear
after 1 keystroke instead of 25.
set quiet
nano will not report errors in the nanorc file nor ask them to be
acknowledged by pressing Enter at startup. If this is used, it
should be placed at the top of the file to be fully effective.
set quotestr string
The email-quote string, used to justify email-quoted paragraphs.
This is an extended regular expression if your system supports them,
otherwise a literal string. The default value is
"^([ \t]*[#:>\|}])+" if you have extended regular expression
support, and "> " otherwise. Note that '\t' stands for a literal
Tab character.
set rebinddelete
Interpret the Delete key differently so that both Backspace and
Delete work properly. You should only need to use this option if
Backspace acts like Delete on your system.
set rebindkeypad
Interpret the numeric keypad keys so that they all work properly.
You should only need to use this option if they don't, as mouse
support won't work properly with this option enabled.
set regexp
Do extended regular expression searches by default.
set showcursor
Put the cursor on the highlighted item in the file browser, to aid
braille users.
set smarthome
Make the Home key smarter. When Home is pressed anywhere but at the
very beginning of non-whitespace characters on a line, the cursor
will jump to that beginning (either forwards or backwards). If the
cursor is already at that position, it will jump to the true
beginning of the line.
set smooth
Use smooth scrolling by default.
set softwrap
Enable soft line wrapping for easier viewing of very long lines.
set speller spellprog
Use spelling checker spellprog instead of the built-in one, which
calls spell.
set statuscolor fgcolor,bgcolor
Specify the color combination to use for the statusbar. See set
titlecolor for more details.
set suspend
Allow nano to be suspended.
set tabsize number
Use a tab size of number columns. The value of number must be
greater than 0. The default value is 8.
set tabstospaces
Convert typed tabs to spaces.
set tempfile
Save automatically on exit, don't prompt.
set titlecolor fgcolor,bgcolor
Specify the color combination to use for the titlebar. Valid names
for the foreground and background colors are: white, black, blue,
green, red, cyan, yellow, and magenta. The name of the foreground
color may be prefixed with bright. And either "fgcolor" or
",bgcolor" may be left out.
set unix
Save a file by default in Unix format. This overrides nano's
default behavior of saving a file in the format that it had. (This
option has no effect when you also use set noconvert.)
set view
Disallow file modification.
set whitespace string
Set the two characters used to indicate the presence of tabs and
spaces. They must be single-column characters.
set wordbounds
Detect word boundaries differently by treating punctuation
characters as parts of words.
set wordchars string
Specify which other characters (besides the normal alphanumeric
ones) should be considered as parts of words. This overrides the
option wordbounds.
SYNTAX HIGHLIGHTING
Coloring the different syntactic elements of a file is done via regular
expressions (see the color command below). This is inherently
imperfect, because regular expressions are not powerful enough to fully
parse a file. Nevertheless, regular expressions can do a lot and are
easy to make, so they are a good fit for a small editor like nano.
A separate syntax can be defined for each kind of file via the
following commands:
syntax "str" ["fileregex" ...]
Defines a syntax named str which can be activated via the
-Y/--syntax command-line option, or will be automatically
activated if the current filename matches the extended regular
expression fileregex. All subsequent color, icolor, header and
other such statements will apply to this str syntax until a new
syntax command is encountered.
The none syntax is reserved; specifying it on the command line
is the same as not having a syntax at all. The default syntax
is special: it takes no fileregex, and applies to files that
don't match any syntax's fileregex.
linter program [arg ...]
Use the given program to run a syntax check on the current file
(this overrides the speller function when defined).
formatter program [arg ...]
Use the given program to automatically reformat text. Useful in
certain programming languages (e.g. Go).
header regex ...
Add one or more regexes which will be compared against the very
first line of the file to be edited, to determine whether this
syntax should be used for that file.
magic regex ...
Add one or more regexes which will be compared against the
result of querying the magic database about the file to be
edited, to determine whether this syntax should be used for that
file. This functionality only works when libmagic is installed
on the system and will be silently ignored otherwise.
comment string
Use the given string for commenting and uncommenting lines. A
vertical bar or pipe character (|) designates bracket-style
comments; for example, "/*|*/" for CSS files. The characters
before the pipe are prepended to the line and the characters
after the pipe are appended at the end of the line. If no pipe
character is present, the entire string is prepended; for
example, "#" for Python files. If empty double quotes are
specified, the comment/uncomment function is disabled; for
example, "" for JSON. Double quotes or backslashes may be
escaped with a backslash; for example, ".\"" for man page
source.
color fgcolor,bgcolor "regex" ...
Display all pieces of text that match the extended regular
expression regex with foreground color fgcolor and background
color bgcolor, at least one of which must be specified. Valid
colors for foreground and background are: white, black, red,
blue, green, yellow, magenta, and cyan. You may use the prefix
"bright" to get a stronger color highlight for the foreground.
If your terminal supports transparency, not specifying a bgcolor
tells nano to attempt to use a transparent background.
icolor fgcolor,bgcolor "regex" ...
Same as above, except that the text matching is case
insensitive.
color fgcolor,bgcolor start="sr" end="er"
Display all pieces of text whose start matches extended regular
expression sr and whose end matches extended regular expression
er with foreground color fgcolor and background color bgcolor,
at least one of which must be specified. This means that, after
an initial instance of sr, all text will be highlighted until
the first instance of er. This allows syntax highlighting to
span multiple lines.
icolor fgcolor,bgcolor start="sr" end="er"
Same as above, except that the text matching is case
insensitive.
include "syntaxfile"
Read in self-contained color syntaxes from syntaxfile. Note
that syntaxfile may contain only the above commands, from syntax
to icolor.
extendsyntax str directive [arg ...]
Extend the syntax previously defined as str to include new
information. This allows you to add a new color, icolor,
header, magic, comment, linter, or formatter directive to an
already defined syntax -- useful when you want to slightly
improve a syntax defined in one of the system-installed files
(which are normally not writable)
REBINDING KEYS
Key bindings can be changed via the following two commands:
bind key function menu
Rebinds the key key to a new function named function in the
context of menu menu (or in all menus where the function exists
by using all).
unbind key menu
Unbinds the key key from the menu named menu (or from all menus
where it exists by using all).
The format of key should be one of:
^ followed by an alpha character or the word "Space". Example: ^C
M- followed by a printable character or the word "Space". Example:
M-C
F followed by a numeric value from 1 to 16. Example: F10
Valid function names to be bound are:
help
Invokes the help viewer.
cancel
Cancels the current command.
exit
Exits from the program (or from the help viewer or the file
browser).
writeout
Writes the current buffer to disk, asking for a name.
savefile
Writes the current file to disk without prompting or warning.
insert
Inserts a file into the current buffer (at the current cursor
position), or into a new buffer when option multibuffer is set.
whereis
Searches for text in the current buffer -- or for filenames
matching a string in the current list in the file browser.
searchagain
Repeats the last search command without prompting. (The form
'research' is deprecated.)
findprevious
As searchagain, but always in the backward direction.
findnext
As searchagain, but always in the forward direction.
replace
Interactively replaces text within the current buffer.
cut
Cuts and stores the current line (or the marked region).
copytext
Copies the current line (or the marked region) without deleting
it.
uncut
Copies the currently stored text into the current buffer at the
current cursor position.
mark
Sets the mark at the current position, to start selecting text.
cutwordleft
Cuts from the cursor position to the beginning of the preceding
word.
cutwordright
Cuts from the cursor position to the beginning of the next word.
cutrestoffile
Cuts all text from the cursor position till the end of the buffer.
curpos
Shows the current cursor position: the line, column, and character
positions. (The form 'cursorpos' is deprecated.)
wordcount
Counts the number of words, lines and characters in the current
buffer.
speller
Invokes a spell-checking program (or a linting program, if the
current syntax highlighting defines one).
linter
A synonym of speller (for when the speller has not been
configured).
justify
Justifies the current paragraph.
fulljustify
Justifies the entire current buffer.
indent
Indents (shifts to the right) the currently marked text.
unindent
Unindents (shifts to the left) the currently marked text.
comment
Comments or uncomments the current line or marked lines, using the
comment style specified in the active syntax.
complete
Completes the fragment before the cursor to a full word found
elsewhere in the current buffer.
left
Goes left one position (in the editor or browser).
right
Goes right one position (in the editor or browser).
up
Goes one line up (in the editor or browser).
down
Goes one line down (in the editor or browser).
scrollup
Scrolls up one line of text from the current position.
scrolldown
Scrolls down one line of text from the current position.
prevword
Moves the cursor to the beginning of the previous word.
nextword
Moves the cursor to the beginning of the next word.
home
Moves the cursor to the beginning of the current line.
end
Moves the cursor to the end of the current line.
beginpara
Moves the cursor to the beginning of the current paragraph.
endpara
Moves the cursor to the end of the current paragraph.
prevblock
Moves the cursor to the beginning of the current or preceding
block of text. (Blocks are separated by one or more blank lines.)
nextblock
Moves the cursor to the beginning of the next block of text.
prevpage
Goes up one screenful.
nextpage
Goes down one screenful.
firstline
Goes to the first line of the file.
lastline
Goes to the last line of the file.
gotoline
Goes to a specific line (and column if specified). Negative
numbers count from the end of the file (and end of the line).
gototext
Switches from targeting a line number to searching for text.
findbracket
Moves the cursor to the bracket (brace, parenthesis, etc.) that
matches (pairs) with the one under the cursor.
prevbuf
Switches to editing/viewing the previous buffer when multiple
buffers are open.
nextbuf
Switches to editing/viewing the next buffer when multiple buffers
are open.
verbatim
Inserts the next keystroke verbatim into the file.
tab
Inserts a tab at the current cursor location.
enter
Inserts a new line below the current one.
delete
Deletes the character under the cursor.
backspace
Deletes the character before the cursor.
undo
Undoes the last performed text action (add text, delete text,
etc).
redo
Redoes the last undone action (i.e., it undoes an undo).
refresh
Refreshes the screen.
suspend
Suspends the editor (if the suspending function is enabled, see
the "suspendenable" entry below).
casesens
Toggles case sensitivity in searching (search/replace menus only).
regexp
Toggles whether searching/replacing is based on literal strings or
regular expressions. (The form 'regex' is deprecated.)
backwards
Toggles whether searching/replacing goes forward or backward.
prevhistory
Shows the previous history entry in the prompt menus (e.g.
search).
nexthistory
Shows the next history entry in the prompt menus (e.g. search).
flipreplace
Toggles between searching for something and replacing something.
(The form 'dontreplace' is deprecated.)
flipexecute
Toggles between inserting a file and executing a command.
flipnewbuffer
Toggles between inserting into the current buffer and into a new
empty buffer. (The form 'newbuffer' is deprecated.)
dosformat
When writing a file, switches to writing a DOS format (CR/LF).
macformat
When writing a file, switches to writing a Mac format.
append
When writing a file, appends to the end instead of overwriting.
prepend
When writing a file, 'prepends' (writes at the beginning) instead
of overwriting.
backup
When writing a file, creates a backup of the current file.
discardbuffer
When about to write a file, discard the current buffer without
saving. (This function is bound by default only when option
--tempfile is in effect.)
tofiles
Starts the file browser, allowing to select a file from a list.
gotodir
Goes to a directory to be specified, allowing to browse anywhere
in the filesystem.
firstfile
Goes to the first file when using the file browser (reading or
writing files).
lastfile
Goes to the last file when using the file browser (reading or
writing files).
nohelp
Toggles the presence of the two-line list of key bindings at the
bottom of the screen.
constupdate
Toggles the constant display of the current line, column, and
character positions.
morespace
Toggles the presence of the blank line which 'separates' the
titlebar from the file text.
smoothscroll
Toggles smooth scrolling (when moving around with the arrow keys).
softwrap
Toggles the displaying of overlong lines on multiple screen lines.
whitespacedisplay
Toggles the showing of whitespace.
nosyntax
Toggles syntax highlighting.
smarthome
Toggles the smartness of the Home key.
autoindent
Toggles whether new lines will contain the same amount of
whitespace as the preceding line.
cuttoend
Toggles whether cutting text will cut the whole line or just from
the current cursor position to the end of the line.
nowrap
Toggles whether long lines will be hard-wrapped to the next line.
tabstospaces
Toggles whether typed tabs will be converted to spaces.
backupfile
Toggles whether a backup will be made of the file being edited.
multibuffer
Toggles whether a file is inserted into the current buffer or read
into a new buffer.
mouse
Toggles mouse support.
noconvert
Toggles automatic conversion of files from DOS/Mac format.
suspendenable
Toggles whether the suspend sequence (normally ^Z) will suspend
the editor window.
Valid menu sections are:
main
The main editor window where text is entered and edited.
search
The search menu (AKA whereis).
replace
The 'search to replace' menu.
replacewith
The 'replace with' menu, which comes up after 'search to replace'.
(The form 'replace2' is deprecated.)
gotoline
The 'goto line (and column)' menu.
writeout
The 'write file' menu.
insert
The 'insert file' menu.
extcmd
The menu for inserting output from an external command, reached
from the insert menu.
help
The help-viewer menu.
spell
The interactive spell checker Yes/no menu.
linter
The linter menu.
browser
The file browser for inserting or writing a file.
whereisfile
The 'search for a file' menu in the file browser.
gotodir
The 'go to directory' menu in the file browser.
all
A special name that encompasses all menus. For bind it means all
menus where the specified function exists; for unbind it means all
menus where the specified key exists.
FILES
/etc/nanorc
System-wide configuration file.
~/.nanorc
Per-user configuration file.
SEE ALSO
nano(1)
AUTHOR
Chris Allegretta and others (see the files AUTHORS and THANKS for details). This manual page was originally written by Jordi Mallach for the Debian system (but may be used by others).
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
