longjmp(3)
NAME
setjmp, sigsetjmp, longjmp, siglongjmp - performing a nonlocal goto
SYNOPSIS
#include <setjmp.h>
int setjmp(jmp_buf env);
int sigsetjmp(sigjmp_buf env, int savesigs);
void longjmp(jmp_buf env, int val);
void siglongjmp(sigjmp_buf env, int val);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
setjmp():
see NOTES.
sigsetjmp(): _POSIX_C_SOURCE
DESCRIPTION
The functions described on this page are used for performing "nonlocal
gotos": transferring execution from one function to a predetermined
location in another function. The setjmp() function dynamically
establishes the target to which control will later be transferred, and
longjmp() performs the transfer of execution.
The setjmp() function saves various information about the calling
environment (typically, the stack pointer, the instruction pointer,
possibly the values of other registers and the signal mask) in the
buffer env for later use by longjmp(). In this case, setjmp() returns
0.
The longjmp() function uses the information saved in env to transfer
control back to the point where setjmp() was called and to restore
("rewind") the stack to its state at the time of the setjmp() call. In
addition, and depending on the implementation (see NOTES), the values
of some other registers and the process signal mask may be restored to
their state at the time of the setjmp() call.
Following a successful longjmp(), execution continues as if setjmp()
had returned for a second time. This "fake" return can be
distinguished from a true setjmp() call because the "fake" return
returns the value provided in val. If the programmer mistakenly passes
the value 0 in val, the "fake" return will instead return 1.
sigsetjmp() and siglongjmp()
sigsetjmp() and siglongjmp() also perform nonlocal gotos, but provide
predictable handling of the process signal mask.
If, and only if, the savesigs argument provided to sigsetjmp() is
nonzero, the process's current signal mask is saved in env and will be
restored if a siglongjmp() is later performed with this env.
RETURN VALUE
setjmp() and sigsetjmp() return 0 when called directly; on the "fake" return that occurs after longjmp() or siglongjmp(), the nonzero value specified in val is returned. The longjmp() or siglongjmp() functions do not return.
ATTRIBUTES
For an explanation of the terms used in this section, see attributes(7). Interface Attribute Value setjmp(), sigsetjmp() Thread safety MT-Safe longjmp(), siglongjmp() Thread safety MT-Safe
CONFORMING TO
setjmp(), longjmp(): POSIX.1-2001, POSIX.1-2008, C89, C99. sigsetjmp(), siglongjmp(): POSIX.1-2001, POSIX.1-2008.
NOTES
POSIX does not specify whether setjmp() will save the signal mask (to
be later restored during longjmp()). In System V it will not. In
4.3BSD it will, and there is a function _setjmp() that will not. The
behavior under Linux depends on the glibc version and the setting of
feature text macros. On Linux with glibc versions before 2.19,
setjmp() follows the System V behavior by default, but the BSD behavior
is provided if the _BSD_SOURCE feature test macro is explicitly defined
and none of _POSIX_SOURCE, _POSIX_C_SOURCE, _XOPEN_SOURCE, _GNU_SOURCE,
or _SVID_SOURCE is defined. Since glibc 2.19, <setjmp.h> exposes only
the System V version of setjmp(). Programs that need the BSD semantics
should replace calls to setjmp() with calls to sigsetjmp() with a
nonzero savesigs argument.
setjmp() and longjmp() can be useful for dealing with errors inside
deeply nested function calls or to allow a signal handler to pass
control to a specific point in the program, rather than returning to
the point where the handler interrupted the main program. In the
latter case, if you want to portably save and restore signal masks, use
sigsetjmp() and siglongjmp(). See also the discussion of program
readability below.
The compiler may optimize variables into registers, and longjmp() may
restore the values of other registers in addition to the stack pointer
and program counter. Consequently, the values of automatic variables
are unspecified after a call to longjmp() if they meet all the
following criteria:
* they are local to the function that made the corresponding setjmp()
call;
* their values are changed between the calls to setjmp() and
longjmp(); and
* they are not declared as volatile.
Analogous remarks apply for siglongjmp().
Nonlocal gotos and program readability
While it can be abused, the traditional C "goto" statement at least has
the benefit that lexical cues (the goto statement and the target label)
allow the programmer to easily perceive the flow of control. Nonlocal
gotos provide no such cues: multiple setjmp() calls might employ the
same jmp_buf variable so that the content of the variable may change
over the lifetime of the application. Consequently, the programmer may
be forced to perform detailed reading of the code to determine the
dynamic target of a particular longjmp() call. (To make the
programmer's life easier, each setjmp() call should employ a unique
jmp_buf variable.)
Adding further difficulty, the setjmp() and longjmp() calls may not
even be in the same source code module.
In summary, nonlocal gotos can make programs harder to understand and
maintain, and an alternative should be used if possible.
Caveats
If the function which called setjmp() returns before longjmp() is
called, the behavior is undefined. Some kind of subtle or unsubtle
chaos is sure to result.
If, in a multithreaded program, a longjmp() call employs an env buffer
that was initialized by a call to setjmp() in a different thread, the
behavior is undefined.
POSIX.1-2008 Technical Corrigendum 2 adds longjmp() and siglongjmp() to
the list of async-signal-safe functions. However, the standard
recommends avoiding the use of these functions from signal handlers and
goes on to point out that if these functions are called from a signal
handler that interrupted a call to a non-async-signal-safe function (or
some equivalent, such as the steps equivalent to exit(3) that occur
upon a return from the initial call to main()), the behavior is
undefined if the program subsequently makes a call to a non-async-
signal-safe function. The only way of avoiding undefined behavior is
to ensure one of the following:
* After long jumping from the signal handler, the program does not
call any non-async-signal-safe functions and does not return from
the initial call to main().
* Any signal whose handler performs a long jump must be blocked during
every call to a non-async-signal-safe function and no non-async-
signal-safe functions are called after returning from the initial
call to main().
SEE ALSO
signal(7)
COLOPHON
This page is part of release 4.09 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
2016-10-08 SETJMP(3)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
