isdnctrl - ISDN control device
#include <linux/isdn.h>
/dev/isdnctrl is a character device with major number 45 and minor numbers 64 to 127. It allows controlling functionality of the Linux ISDN subsystem.
Currently, the following ioctl calls are supported: IIOCNETAIF Add an ISDN network interface. This function adds a network interface to the kernel's device table. This interface can be used just like normal eth interfaces. Argument: arg should point to a zero terminated string of max. 10 characters. if arg is NULL, the kernel assigns a name. Return: On success, the name of the new interface is copied to arg. and the call returns 0. On failure, an error code is returned. IIOCNETASL Create a slave interface. Creates a slave interface for RAW-device channel-bundling. These devices behave like network-interfaces, execpt they are invisible to user. Only ISDN parameters can be controlled, but no IP-parameters. IP-parameters are inherited from the corresponding master-device. Argument: arg should point to a zero terminated string of max. 21 characters containing two comma-separated names. The first part is the name of an existing ISDN network device, which will be master. The second part will be the name of the new slave interface. Return: On success, the name of the new interface is copied to arg. and the call returns 0. On failure, an error code is returned. IIOCNETDIF Delete a network-interface. This call deletes an existing ISDN network interface. Argument: arg should point to a zero terminated string of max. 10 characters naming an existing interface which will be deleted. If the interface is a master interface, all it's slave-interfaces will be deleted also. Return: On success, the call returns 0. On failure, an error code is returned. IIOCNETSCF Set configurable parameters of an ISDN network interface. This call replaces all ISDN related parameters of an interface by the parameters given. Argument: arg shoud point to a struct isdn_net_ioctl_cfg (defined in linux/isdn.h) Return: On success, the call returns 0. On failure, an error code is returned. IIOCNETGCF Get configurable parameters of an ISDN network interface. This call returns all ISDN related parameters of an interface. Argument: arg shoud point to a struct isdn_net_ioctl_cfg (defined in linux/isdn.h) which will be filled by the current setup. Return: On success, the call returns 0 and the interface-setup is copied to *arg. On failure, an error code is returned. IIOCNETANM Add a phone number to an ISDN network interface. This call adds a phone number to an existing network interface. Argument: arg shoud point to a struct isdn_net_ioctl_phone which contains necessary information. Return: On success, the call returns 0 and the phone number is added to either outgoing or incoming number list. On failure, an error code is returned. IIOCNETDNM Delete a phone number from an ISDN network interface. This call deletes a phone number from an existing network interface. Argument: arg shoud point to a struct isdn_net_ioctl_phone which contains necessary information. Return: On success, the call returns 0 and the phone number is deleted from either outgoing or incoming number list. On failure, an error code is returned. IIOCNETGNM Get list of phone numbers from an ISDN network interface. This call returns the list of phone numbers associated to an existing network interface. Argument: arg shoud point to a a union of struct isdn_net_ioctl_phone and a buffer, large enough to hold a concatenated list of strings containing the phone numbers. Return: On success, the call returns 0 and the list of phone numbers is returned as a space-separated list of number- strings terminated by a NULL byte. IIOCNETDIL Trigger dialing of an ISDN network interface. This call initiates dialing of an ISDN network interface, if it is not connected. Normally, this ioctl is not needed, because ISDN network interface perform dial on demand by default. Argument: arg should point to a zero terminated string of max. 10 characters naming the desired interface. Return: On success, the call returns 0 and the interface starts dialing. IIOCNETHUP Hangup an ISDN network interface. This call initiates hangup of an ISDN network interface, if it is connected. Argument: arg should point to a zero terminated string of max. 10 characters naming the desired interface. Return: On success, the call returns 0 and the interface hangs up. IIOCNETALN Add a link of an MPP-configured ISDN network interface. This call initiates dialing of a Multilink-PPP slave ISDN network interface, if it is not connected. Argument: arg should point to a zero terminated string of max. 10 characters naming the desired interface. Return: On success, the call returns 0 and the interface starts dialing. IIOCNETDLN Hangup an MPP-configured ISDN network interface. This call initiates hangup of an Multilink-PPP ISDN network interface, if it is connected. Argument: arg should point to a zero terminated string of max. 10 characters naming the desired interface. Return: On success, the call returns 0 and the interface hangs up. IIOCNETARU Add a timeout rule to an ISDN network interface. This call adds a timeout rule to an existing interface. Argument: arg should point to a struct isdn_ioctl_timeout_rule containing the necessary parameters. Return: On success, the call returns 0 and the rule is added to the rule list of the interface. IIOCNETDRU Delete a timeout rule from an ISDN network interface. This call deletes a timeout rule from an existing interface. Argument: arg should point to a struct isdn_ioctl_timeout_rule containing the necessary parameters. Return: On success, the call returns 0 and the rule is deleted from the rule list of the interface. IIOCNETGRU Get a timeout rule from an ISDN network interface. This call returns a timeout rule from an existing interface. Argument: arg should point to a struct isdn_ioctl_timeout_rule containing the necessary parameters. Return: On success, the call returns 0 and the struct is filled from the rule list of the interface. IIOCNETBUD Handle budget accounting of an ISDN network interface. Argument and Return: to be defined. IIOCSETVER Set verbosity of link level. Argument: arg is an integer, defining the new verbose value. Return: This call always returns 0. IIOCSETGST Set global stop flag of link level. Argument: arg is an integer, defining the new stop flag value (0 or !0). Return: This call always returns 0. IIOCSETBRJ Set busreject flag of a lowlevel driver. Argument: arg should point to an struct isdn_ioctl_struct containing the driver's ID and the value of the busreject flag. Return: On success, the call returns 0 and the busreject flag of the selected driver is set according the given parameter. IIOCSIGPRF Enable signaling on change of modem profiles. With this call, the calling process is registered to receive a SIGIO on every change of any register of any ttyI. Thus it can read register settings and save them to a file. The calling process has to keep the device open in order to receive notifications. As soon as it closes the device, registration is deleted. Argument: none Return: This call always returns 0. IIOCGETPRF Get all modem register settings. With this call, all modem registers of all ttyI devices can be read. Argument: arg should point to a buffer of length ( ISDN_MODEM_ANZREG + ISDN_MSNLEN ) * ISDN_MAX_CHANNELS. Return: On return, the provided buffer is filled with the register values. IIOCSETPRF Set all modem register settings. With this call, all modem registers of all ttyI devices can be written. Argument: arg should point to a buffer of length ( ISDN_MODEM_ANZREG + ISDN_MSNLEN ) * ISDN_MAX_CHANNELS. filled with the values of all modem registers. Return: On return, the modem registers are set from the contents of the provided buffer. IIOCSETMAP Set Mapping table. This call is used to set EAZ/MSN mapping of a lowlevel driver. Argument: arg should point to a struct isdn_ioctl_struct containing the necessary parameters. Return: On success, the mapping table is set from the given parameters an the call returns 0. IIOCGETMAP Get Mapping table. This call is used to get EAZ/MSN mapping of a lowlevel driver. Argument: arg should point to a struct isdn_ioctl_struct containing the necessary parameters. Return: On success, the current mapping table of the given driver is returned and the call returns 0. IIOCDRVCTL Lowlevel driver ioctl. This call is used for controlling various lowlevel drivers. The ioctl-code for this command is assembled by adding IIOCDRVCTL (128) and the desired driver ioctl-code. Therefore, a lowlevel driver can understand a maximum of 127 different ioctls. Argument: arg should point to a struct isdn_ioctl_struct containing the necessary parameters, especially the driver-Id must be filled correctly. The arg component inside isdn_ioctl_struct is handed down to the driver's ioctl function. Its meaning is not defined here and depends on the lowlevel driver. See documentation for the various lewlevel drivers for information about driver- specific ioctl. Return: The return code depends on the driver's ioctl function. Usually, 0 means no error.
Fritz Elfert <fritz@isdn4linux.de>
isdninfo(4), icnctrl(4).
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.