ip-xfrm(8)
NAME
ip-xfrm - transform configuration
SYNOPSIS
ip [ OPTIONS ] xfrm { COMMAND | help }
ip xfrm XFRM-OBJECT { COMMAND | help }
XFRM-OBJECT := state | policy | monitor
ip xfrm state { add | update } ID [ ALGO-LIST ] [ mode MODE ] [ mark
MARK [ mask MASK ] ] [ reqid REQID ] [ seq SEQ ] [ replay-
window SIZE ] [ replay-seq SEQ ] [ replay-oseq SEQ ] [ replay-
seq-hi SEQ ] [ replay-oseq-hi SEQ ] [ flag FLAG-LIST ] [ sel
SELECTOR ] [ LIMIT-LIST ] [ encap ENCAP ] [ coa ADDR[/PLEN] ] [
ctx CTX ]
ip xfrm state allocspi ID [ mode MODE ] [ mark MARK [ mask MASK ] ] [
reqid REQID ] [ seq SEQ ] [ min SPI max SPI ]
ip xfrm state { delete | get } ID [ mark MARK [ mask MASK ] ]
ip xfrm state { deleteall | list } [ ID ] [ mode MODE ] [ reqid REQID ]
[ flag FLAG-LIST ]
ip xfrm state flush [ proto XFRM-PROTO ]
ip xfrm state count
ID := [ src ADDR ] [ dst ADDR ] [ proto XFRM-PROTO ] [ spi SPI ]
XFRM-PROTO := esp | ah | comp | route2 | hao
ALGO-LIST := [ ALGO-LIST ] ALGO
ALGO := { enc | auth } ALGO-NAME ALGO-KEYMAT |
auth-trunc ALGO-NAME ALGO-KEYMAT ALGO-TRUNC-LEN |
aead ALGO-NAME ALGO-KEYMAT ALGO-ICV-LEN |
comp ALGO-NAME
MODE := transport | tunnel | beet | ro | in_trigger
FLAG-LIST := [ FLAG-LIST ] FLAG
FLAG := noecn | decap-dscp | nopmtudisc | wildrecv | icmp | af-unspec |
align4 | esn
SELECTOR := [ src ADDR[/PLEN] ] [ dst ADDR[/PLEN] ] [ dev DEV ]
[ UPSPEC ]
UPSPEC := proto { PROTO |
{ tcp | udp | sctp | dccp } [ sport PORT ] [ dport PORT ] |
{ icmp | ipv6-icmp | mobility-header } [ type NUMBER ] [ code
NUMBER ] |
gre [ key { DOTTED-QUAD | NUMBER } ] }
LIMIT-LIST := [ LIMIT-LIST ] limit LIMIT
LIMIT := { time-soft | time-hard | time-use-soft | time-use-hard }
SECONDS |
{ byte-soft | byte-hard } SIZE |
{ packet-soft | packet-hard } COUNT
ENCAP := { espinudp | espinudp-nonike } SPORT DPORT OADDR
ip xfrm policy { add | update } SELECTOR dir DIR [ ctx CTX ] [ mark
MARK [ mask MASK ] ] [ index INDEX ] [ ptype PTYPE ] [ action
ACTION ] [ priority PRIORITY ] [ flag FLAG-LIST ] [ LIMIT-LIST
] [ TMPL-LIST ]
ip xfrm policy { delete | get } { SELECTOR | index INDEX } dir DIR [
ctx CTX ] [ mark MARK [ mask MASK ] ] [ ptype PTYPE ]
ip xfrm policy { deleteall | list } [ SELECTOR ] [ dir DIR ] [ index
INDEX ] [ ptype PTYPE ] [ action ACTION ] [ priority PRIORITY ]
ip xfrm policy flush [ ptype PTYPE ]
ip xfrm policy count
ip xfrm policy set [ hthresh4 LBITS RBITS ] [ hthresh6 LBITS RBITS ]
SELECTOR := [ src ADDR[/PLEN] ] [ dst ADDR[/PLEN] ] [ dev DEV ] [
UPSPEC ]
UPSPEC := proto { PROTO |
{ tcp | udp | sctp | dccp } [ sport PORT ] [ dport PORT ] |
{ icmp | ipv6-icmp | mobility-header } [ type NUMBER ] [ code
NUMBER ] |
gre [ key { DOTTED-QUAD | NUMBER } ] }
DIR := in | out | fwd
PTYPE := main | sub
ACTION := allow | block
FLAG-LIST := [ FLAG-LIST ] FLAG
FLAG := localok | icmp
LIMIT-LIST := [ LIMIT-LIST ] limit LIMIT
LIMIT := { time-soft | time-hard | time-use-soft | time-use-hard }
SECONDS |
{ byte-soft | byte-hard } SIZE |
{ packet-soft | packet-hard } COUNT
TMPL-LIST := [ TMPL-LIST ] tmpl TMPL
TMPL := ID [ mode MODE ] [ reqid REQID ] [ level LEVEL ]
ID := [ src ADDR ] [ dst ADDR ] [ proto XFRM-PROTO ] [ spi SPI ]
XFRM-PROTO := esp | ah | comp | route2 | hao
MODE := transport | tunnel | beet | ro | in_trigger
LEVEL := required | use
ip xfrm monitor [ all-nsid ] [ all
| LISTofXFRM-OBJECTS ]
LISTofXFRM-OBJECTS := [ LISTofXFRM-OBJECTS ] XFRM-OBJECT
XFRM-OBJECT := acquire | expire | SA | policy | aevent | report
DESCRIPTION
xfrm is an IP framework for transforming packets (such as encrypting
their payloads). This framework is used to implement the IPsec protocol
suite (with the state object operating on the Security Association
Database, and the policy object operating on the Security Policy
Database). It is also used for the IP Payload Compression Protocol and
features of Mobile IPv6.
ip xfrm state add add new state into xfrm
ip xfrm state update update existing state in xfrm
ip xfrm state allocspi allocate an SPI value
ip xfrm state delete delete existing state in xfrm
ip xfrm state get get existing state in xfrm
ip xfrm state deleteall delete all existing state in xfrm
ip xfrm state list print out the list of existing state in xfrm
ip xfrm state flush flush all state in xfrm
ip xfrm state count count all existing state in xfrm
ID is specified by a source address, destination address, transform
protocol XFRM-PROTO, and/or Security Parameter Index SPI. (For
IP Payload Compression, the Compression Parameter Index or CPI
is used for SPI.)
XFRM-PROTO
specifies a transform protocol: IPsec Encapsulating Security
Payload (esp), IPsec Authentication Header (ah), IP Payload
Compression (comp), Mobile IPv6 Type 2 Routing Header (route2),
or Mobile IPv6 Home Address Option (hao).
ALGO-LIST
contains one or more algorithms to use. Each algorithm ALGO is
specified by:
* the algorithm type: encryption (enc), authentication
(auth or auth-trunc), authenticated encryption with
associated data (aead), or compression (comp)
* the algorithm name ALGO-NAME (see below)
* (for all except comp) the keying material ALGO-KEYMAT,
which may include both a key and a salt or nonce value;
refer to the corresponding RFC
* (for auth-trunc only) the truncation length ALGO-TRUNC-
LEN in bits
* (for aead only) the Integrity Check Value length ALGO-
ICV-LEN in bits
Encryption algorithms include ecb(cipher_null), cbc(des),
cbc(des3_ede), cbc(cast5), cbc(blowfish), cbc(aes),
cbc(serpent), cbc(camellia), cbc(twofish), and
rfc3686(ctr(aes)).
Authentication algorithms include digest_null, hmac(md5),
hmac(sha1), hmac(sha256), hmac(sha384), hmac(sha512),
hmac(rmd610), and xcbc(aes).
Authenticated encryption with associated data (AEAD) algorithms
include rfc4106(gcm(aes)), rfc4309(ccm(aes)), and
rfc4543(gcm(aes)).
Compression algorithms include deflate, lzs, and lzjh.
MODE specifies a mode of operation for the transform protocol. IPsec
and IP Payload Compression modes are transport, tunnel, and (for
IPsec ESP only) Bound End-to-End Tunnel (beet). Mobile IPv6
modes are route optimization (ro) and inbound trigger
(in_trigger).
FLAG-LIST
contains one or more of the following optional flags: noecn,
decap-dscp, nopmtudisc, wildrecv, icmp, af-unspec, align4, or
esn.
SELECTOR
selects the traffic that will be controlled by the policy, based
on the source address, the destination address, the network
device, and/or UPSPEC.
UPSPEC selects traffic by protocol. For the tcp, udp, sctp, or dccp
protocols, the source and destination port can optionally be
specified. For the icmp, ipv6-icmp, or mobility-header
protocols, the type and code numbers can optionally be
specified. For the gre protocol, the key can optionally be
specified as a dotted-quad or number. Other protocols can be
selected by name or number PROTO.
LIMIT-LIST
sets limits in seconds, bytes, or numbers of packets.
ENCAP encapsulates packets with protocol espinudp or espinudp-nonike,
using source port SPORT, destination port DPORT , and original
address OADDR.
ip xfrm policy add add a new policy
ip xfrm policy update update an existing policy
ip xfrm policy delete delete an existing policy
ip xfrm policy get get an existing policy
ip xfrm policy deleteall delete all existing xfrm policies
ip xfrm policy list print out the list of xfrm policies
ip xfrm policy flush flush policies
SELECTOR
selects the traffic that will be controlled by the policy, based
on the source address, the destination address, the network
device, and/or UPSPEC.
UPSPEC selects traffic by protocol. For the tcp, udp, sctp, or dccp
protocols, the source and destination port can optionally be
specified. For the icmp, ipv6-icmp, or mobility-header
protocols, the type and code numbers can optionally be
specified. For the gre protocol, the key can optionally be
specified as a dotted-quad or number. Other protocols can be
selected by name or number PROTO.
DIR selects the policy direction as in, out, or fwd.
CTX sets the security context.
PTYPE can be main (default) or sub.
ACTION can be allow (default) or block.
PRIORITY
is a number that defaults to zero.
FLAG-LIST
contains one or both of the following optional flags: local or
icmp.
LIMIT-LIST
sets limits in seconds, bytes, or numbers of packets.
TMPL-LIST
is a template list specified using ID, MODE, REQID, and/or
LEVEL.
ID is specified by a source address, destination address, transform
protocol XFRM-PROTO, and/or Security Parameter Index SPI. (For
IP Payload Compression, the Compression Parameter Index or CPI
is used for SPI.)
XFRM-PROTO
specifies a transform protocol: IPsec Encapsulating Security
Payload (esp), IPsec Authentication Header (ah), IP Payload
Compression (comp), Mobile IPv6 Type 2 Routing Header (route2),
or Mobile IPv6 Home Address Option (hao).
MODE specifies a mode of operation for the transform protocol. IPsec
and IP Payload Compression modes are transport, tunnel, and (for
IPsec ESP only) Bound End-to-End Tunnel (beet). Mobile IPv6
modes are route optimization (ro) and inbound trigger
(in_trigger).
LEVEL can be required (default) or use.
ip xfrm policy count count existing policies
Use one or more -s options to display more details, including policy
hash table information.
ip xfrm policy set configure the policy hash table
Security policies whose address prefix lengths are greater than or
equal policy hash table thresholds are hashed. Others are stored in the
policy_inexact chained list.
LBITS specifies the minimum local address prefix length of policies
that are stored in the Security Policy Database hash table.
RBITS specifies the minimum remote address prefix length of policies
that are stored in the Security Policy Database hash table.
ip xfrm monitor state monitoring for xfrm objects
The xfrm objects to monitor can be optionally specified.
If the all-nsid option is set, the program listens to all network
namespaces that have a nsid assigned into the network namespace were
the program is running. A prefix is displayed to show the network
namespace where the message originates. Example:
[nsid 1]Flushed state proto 0
AUTHOR
Manpage revised by David Ward <[email protected]> Manpage revised by Christophe Gouault <[email protected]> Manpage revised by Nicolas Dichtel <[email protected]>
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
