inimf(1)
NAME
mf, inimf, mf-nowin - Metafont, a language for font and logo design
SYNOPSIS
mf [options] [commands]
DESCRIPTION
Metafont reads the program in the specified files and outputs font
rasters (in gf format) and font metrics (in tfm format). The Metafont
language is described in The Metafontbook.
Like TeX, Metafont is normally used with a large body of precompiled
macros, and font generation in particular requires the support of
several macro files. This version of Metafont looks at its command
line to see what name it was called under. Both inimf and virmf are
symlinks to the mf executable. When called as inimf (or when the -ini
option is given) it can be used to precompile macros into a .base file.
When called as virmf it will use the plain base. When called under any
other name, Metafont will use that name as the name of the base to use.
For example, when called as mf the mf base is used, which is identical
to the plain base. Other bases than plain are rarely used.
The commands given on the command line to the Metafont program are
passed to it as the first input line. (But it is often easier to type
extended arguments as the first input line, since UNIX shells tend to
gobble up or misinterpret Metafont's favorite symbols, like semicolons,
unless you quote them.) As described in The Metafontbook, that first
line should begin with a filename, a \controlsequence, or a &basename.
The normal usage is to say
mf '\mode=<printengine>; [mag=magstep(n);]' input font
to start processing font.mf. The single quotes are the best way of
keeping the Unix shell from misinterpreting the semicolons and from
removing the \ character, which is needed here to keep Metafont from
thinking that you want to produce a font called mode. (Or you can just
say mf and give the other stuff on the next line, without quotes.)
Other control sequences, such as batchmode (for silent operation) can
also appear. The name font will be the ``jobname'', and is used in
forming output file names. If Metafont doesn't get a file name in the
first line, the jobname is mfput. The default extension, .mf, can be
overridden by specifying an extension explicitly.
A log of error messages goes into the file jobname.log. The output
files are jobname.tfm and jobname.<number>gf, where <number> depends on
the resolution and magnification of the font. The mode in this example
is shown generically as <printengine>, a symbolic term for which the
name of an actual device or, most commonly, the name localfont (see
below) must be substituted. If the mode is not specified or is not
valid for your site, Metafont will default to proof mode which produces
large character images for use in font design and refinement. Proof
mode can be recognized by the suffix .2602gf after the jobname.
Examples of proof mode output can be found in Computer Modern Typefaces
(Volume E of Computers and Typesetting). The system of magsteps is
identical to the system used by TeX, with values generally in the range
0.5, 1.0, 2.0, 3.0, 4.0 and 5.0. A listing of gf numbers for 118-dpi,
240-dpi and 300-dpi fonts is shown below.
MAGSTEP 118 dpi 240 dpi 300 dpi
mag=magstep(0) 118 240 300
mag=magstep(0.5) 129 263 329
mag=magstep(1) 142 288 360
mag=magstep(2) 170 346 432
mag=magstep(3) 204 415 518
mag=magstep(4) 245 498 622
mag=magstep(5) 294 597 746
Magnification can also be specified not as a magstep but as an
arbitrary value, such as 1.315, to create special character sizes.
Before font production can begin, it is necessary to set up the
appropriate base files. The minimum set of components for font
production for a given print-engine is the plain.mf macro file and the
local mode_def file. The macros in plain.mf can be studied in an
appendix to the Metafontbook; they were developed by Donald E. Knuth,
and this file should never be altered except when it is officially
upgraded. Each mode_def specification helps adapt fonts to a
particular print-engine. There is a regular discussion of mode_defs in
TUGboat, the journal of the TeX Users Group. The local ones in use on
this computer should be in modes.mf.
The e response to Metafont's error-recovery mode invokes the system
default editor at the erroneous line of the source file. There is an
environment variable, MFEDIT, that overrides the default editor. It
should contain a string with "%s" indicating where the filename goes
and "%d" indicating where the decimal linenumber (if any) goes. For
example, an MFEDIT string for the vi editor can be set with the csh
command
setenv MFEDIT "vi +%d %s"
A convenient file in the library is null.mf, containing nothing. When
mf can't find the file it thinks you want to input, it keeps asking you
for another file name; responding `null' gets you out of the loop if
you don't want to input anything.
ONLINE GRAPHICS OUTPUT
Metafont can use most modern displays, so you can see its output without printing. Chapter 23 of The Metafontbook describes what you can do. This implementation of Metafont uses environment variables to determine which display device you want to use. First it looks for a variable MFTERM, and then for TERM. If it can't find either, you get no online output. Otherwise, the value of the variable determines the device to use: hp2627, sun (for old SunView), tek, uniterm (for an Atari ST Tek 4014 emulator), xterm (for either X10 or X11). Some of these devices may not be supported in all Metafont executables; the choice is made at compilation time. On some systems, there are two Metafont binaries, mf and mf-nowin. On those systems the mf binary supports graphics, while the mf-nowin binary does not. The mf-nowin binary is used by scripts like mktexpk where graphics support is a nuisance rather than something helpful.
OPTIONS
This version of Metafont understands the following command line
options.
-base base
Use base as the name of the base to be used, instead of the name
by which Metafont was called or a %& line.
-file-line-error
Print error messages in the form file:line:error which is
similar to the way many compilers format them.
-no-file-line-error
Disable printing error messages in the file:line:error style.
-file-line-error-style
This is the old name of the -file-line-error option.
-halt-on-error
Exit with an error code when an error is encountered during
processing.
-help Print help message and exit.
-ini Be inimf, for dumping bases; this is implicitly true if the
program is called as inimf.
-interaction mode
Sets the interaction mode. The mode can be one of batchmode,
nonstopmode, scrollmode, and errorstopmode. The meaning of
these modes is the same as that of the corresponding commands.
-jobname name
Use name for the job name, instead of deriving it from the name
of the input file.
-kpathsea-debug bitmask
Sets path searching debugging flags according to the bitmask.
See the Kpathsea manual for details.
-maketex fmt
Enable mktexfmt, where fmt must be mf.
-no-maketex fmt
Disable mktexfmt, where fmt must be mf.
-output-directory directory
Write output files in directory instead of the current
directory. Look up input files in directory first, the along
the normal search path.
-parse-first-line
If the first line of the main input file begins with %& parse it
to look for a dump name or a -translate-file option.
-no-parse-first-line
Disable parsing of the first line of the main input file.
-progname name
Pretend to be program name. This affects both the format used
and the search paths.
-recorder
Enable the filename recorder. This leaves a trace of the files
opened for input and output in a file with extension .fls.
-translate-file tcxname
Use the tcxname translation table.
-version
Print version information and exit.
ENVIRONMENT
See the Kpathsearch library documentation (the `Path specifications' node) for the details of how the environment variables are use when searching. The kpsewhich utility can be used to query the values of the variables. If the environment variable TEXMFOUTPUT is set, Metafont attempts to put its output files in it, if they cannot be put in the current directory. Again, see tex(1). MFINPUTS Search path for input and opening files. MFEDIT Command template for switching to editor. MFTERM Determines the online graphics display. If MFTERM is not set, and DISPLAY is set, the Metafont window support for X is used. (DISPLAY must be set to a valid X server specification, as usual.) If neither MFTERM nor DISPLAY is set, TERM is used to guess the window support to use.
FONT UTILITIES
A number of utility programs are available. The following is a partial
list of available utilities and their purpose. Consult your local
Metafont guru for details.
gftopk Takes a gf file and produces a more tightly packed pk font
file.
gftodvi Produces proof sheets for fonts.
gftype Displays the contents of a gf file in mnemonics and/or images.
pktype Mnemonically displays the contents of a pk file.
mft Formats a source file as shown in Computer Modern Typefaces.
FILES
mf.pool
Encoded text of Metafont's messages.
*.base Predigested Metafont base files.
$TEXMFMAIN/metafont/base/plain.mf
The standard base.
$TEXMFMAIN/metafont/misc/modes.mf
The file of mode_defs for your site's various printers
NOTES
This manual page is not meant to be exhaustive. The complete documentation for this version of Metafont can be found in the info manual Web2C: A TeX implementation.
BUGS
On January 4, 1986 the ``final'' bug in Metafont was discovered and removed. If an error still lurks in the code, Donald E. Knuth promises to pay a finder's fee which doubles every year to the first person who finds it. Happy hunting.
SUGGESTED READING
Donald E. Knuth, The Metafontbook (Volume C of Computers and Typesetting), Addison-Wesley, 1986, ISBN 0-201-13445-4. Donald E. Knuth, Metafont: The Program (Volume D of Computers and Typesetting), Addison-Wesley, 1986, ISBN 0-201-13438-1. Donald E. Knuth, Computer Modern Typefaces (Volume E of Computers and Typesetting), Addison-Wesley, 1986, ISBN 0-201-13446-2. TUGboat (the journal of the TeX Users Group).
COMMENTS
Warning: ``Type design can be hazardous to your other interests. Once you get hooked, you will develop intense feelings about letterforms; the medium will intrude on the messages that you read. And you will perpetually be thinking of improvements to the fonts that you see everywhere, especially those of your own design.''
SEE ALSO
gftopk(1), gftodvi(1), gftype(1), mft(1), pltotf(1), tftopl(1).
AUTHORS
Metafont was designed by Donald E. Knuth, who implemented it using his Web system for Pascal programs. It was originally ported to Unix by Paul Richards at the University of Illinois at Urbana-Champaign. This page was mostly written by Pierre MacKay.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
