hpftodit(1)
NAME
hpftodit - create font description files for use with groff -Tlj4
SYNOPSIS
hpftodit [ -adqsv ] [ -in ] tfm_file map_file font It is possible to have whitespace between the -i option and its parameter.
DESCRIPTION
hpftodit creates a font file for use with a Hewlett-Packard
LaserJet 4--series (or newer) printer with groff -Tlj4, using data from
an HP tagged font metric (TFM) file. tfm_file is the name of the TFM
file for the font; Intellifont and TrueType TFM files are supported,
but symbol set TFM files are not. map_file is a file giving the groff
names for characters in the font; this file should consist of a
sequence of lines of the form:
m u c1 c2 ... [ # comment ]
where m is a decimal integer giving the MSL number of the character, u
is a hexadecimal integer giving the Unicode value of the character, and
c1, c2, ... are the groff names of the character. The values can be
separated by any whitespace; the Unicode value must use uppercase
digits A--F, and must be without a leading '0x', 'u', or 'U+'. Unicode
values corresponding to composite glyphs are decomposed; e.g., 'u00C0'
becomes 'u0041_0300'. The name for a glyph without a groff name may be
given as uXXXX if the glyph corresponds to a Unicode value, or as an
unnamed glyph '---'. If the given Unicode value is in the Private Use
Area (0xE000--0xF8FF), the glyph is included as an unnamed glyph. Refer
to groff_diff(1) for additional information about unnamed glyphs and
how to access them.
Blank lines and lines beginning with '#' are ignored. A '#' following
one or more groff names begins a comment. Because '#' is a valid groff
name, it must appear first in a list of groff names if a comment is
included, e.g.,
3 0023 # # number sign
or
3 0023 # sh # number sign
rather than
3 0023 sh # # number sign
which will treat the first '#' as the beginning of the comment.
font is the name of the groff font file. The groff font file is
written to font; if font is specified as '-', the output is written to
the standard output.
The -s option should be given if the font is special (a font is special
if troff should search it whenever a character is not found in the
current font). If the font is special, it should be listed in the
fonts command in the DESC file; if it is not special, there is no need
to list it, since troff can automatically mount it when it's first
used.
If the -i option is used, hpftodit automatically will generate an
italic correction, a left italic correction and a subscript correction
for each character (the significance of these parameters is explained
in groff_font(5)).
OPTIONS
-a Include characters in the TFM file that are not included in the
map file. A glyph with corresponding Unicode value is given the
name uXXXX; a glyph without a Unicode value is included as an
unnamed glyph '---'. A glyph with a Unicode value in the
Private Use Area (0xE000--0xF8FF) also is included as an unnamed
glyph.
This option provides a simple means of adding Unicode-named and
unnamed glyphs to a font without including them in the map file,
but it affords little control over which glyphs are placed in a
regular font and which are placed in a special font. The
presence or absence of the -s option has some effect on which
glyphs are included: without the -s option, only the "text"
symbol sets are searched for matching glyphs; with the -s
option, only the "mathematical" symbol sets are searched.
Nonetheless, restricting the symbol sets searched isn't very
selective---many glyphs are placed in both regular and special
fonts. Normally, the -a option should be used only as a last
resort.
-d Dump information about the TFM file to the standard output; this
option can be useful for ensuring that a TFM file is a proper
match for a font, and that the contents of the TFM file are
suitable. The information includes the values of important TFM
tags, and a listing (by MSL number for Intellifont TFM files or
by Unicode value for TrueType TFM files) of the glyphs included
in the TFM file. The unit of measure 'DU' for some tags
indicates design units; there are 8782 design units per em for
Intellifont fonts, and 2048 design units per em for TrueType
fonts. Note that the accessibility of a glyph depends on its
inclusion in a symbol set; some TFM files list many glyphs but
only a few symbol sets.
The glyph listing includes the glyph index within the TFM file,
the MSL or Unicode value, and the symbol set and character code
that will be used to print the glyph. If map_file is given,
groff names are given for matching glyphs. If only the glyph
index and MSL or Unicode value are given, the glyph does not
appear in any supported symbol set and cannot be printed.
With the -d option, map_file is optional, and font is ignored if
given.
-q Suppress warnings about characters in the map file that were not
found in the TFM file. Warnings never are given for unnamed
glyphs or by glyphs named by their Unicode values. This option
is useful when sending the output of hpftodit to the standard
output.
-v Print the hpftodit version number.
-s The font is special. This option adds the special command to
the font file, and affects the order in which HP symbol sets are
searched for each glyph. Without the -s option, the "text" sets
are searched before the "mathematical" symbol sets. With the -s
option, the search order is reversed.
-in Generate an italic correction for each character so that the
character's width plus the character's italic correction is
equal to n thousandths of an em plus the amount by which the
right edge of the character's bounding is to the right of the
character's origin. If this would result in a negative italic
correction, use a zero italic correction instead.
Also generate a subscript correction equal to the product of the
tangent of the slant of the font and four fifths of the x-height
of the font. If this would result in a subscript correction
greater than the italic correction, use a subscript correction
equal to the italic correction instead.
Also generate a left italic correction for each character equal
to n thousandths of an em plus the amount by which the left edge
of the character's bounding box is to the left of the
character's origin. The left italic correction may be negative.
This option normally is needed only with italic or oblique
fonts; a value of 50 (0.05 em) usually is a reasonable choice.
FILES
/usr/share/groff/1.22.3/font/devlj4/DESC Device description
file.
/usr/share/groff/1.22.3/font/devlj4/F Font description
file for font F.
/usr/share/groff/1.22.3/font/devlj4/generate/*.map Symbol mapping
files
SEE ALSO
groff(1), groff_diff(1), grolj4(1), groff_font(5), lj4_font(5)
COPYING
Copyright 1994-2014 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be included in translations approved by the Free Software Foundation instead of in the original English.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
