gimprc-2.8(5)
NAME
gimprc - gimp configuration file
DESCRIPTION
The gimprc file is a configuration file read by GIMP when it starts up.
There are two of these: one system-wide one stored in
/etc/gimp/2.0/gimprc and a per-user $HOME/.gimp-2.8/gimprc which may
override system settings.
Comments are introduced by a hash sign (#), and continue until the end
of the line. Blank lines are ignored.
The gimprc file associates values with properties. These properties
may be set by lisp-like assignments of the form:
(property-name value)
where:
property-name
is one of the property names described below.
value is the value the property is to be set to.
Either spaces or tabs may be used to separate the name from the value.
PROPERTIES
Valid properties and their default values are:
(temp-path "${gimp_dir}/tmp")
Sets the folder for temporary storage. Files will appear here
during the course of running GIMP. Most files will disappear
when GIMP exits, but some files are likely to remain, so it is
best if this folder not be one that is shared by other users.
This is a single folder.
(swap-path "${gimp_dir}")
Sets the swap file location. GIMP uses a tile based memory
allocation scheme. The swap file is used to quickly and easily
swap tiles out to disk and back in. Be aware that the swap file
can easily get very large if GIMP is used with large images.
Also, things can get horribly slow if the swap file is created
on a folder that is mounted over NFS. For these reasons, it may
be desirable to put your swap file in "/tmp". This is a single
folder.
(num-processors 1)
Sets how many processors GIMP should try to use simultaneously.
This is an integer value.
(tile-cache-size 1034406k)
When the amount of pixel data exceeds this limit, GIMP will
start to swap tiles to disk. This is a lot slower but it makes
it possible to work on images that wouldn't fit into memory
otherwise. If you have a lot of RAM, you may want to set this
to a higher value. The integer size can contain a suffix of
'B', 'K', 'M' or 'G' which makes GIMP interpret the size as
being specified in bytes, kilobytes, megabytes or gigabytes. If
no suffix is specified the size defaults to being specified in
kilobytes.
Specifies the language to use for the user interface. This is a string
value.
(interpolation-type cubic)
Sets the level of interpolation used for scaling and other
transformations. Possible values are none, linear, cubic and
lanczos.
(default-threshold 15)
Tools such as fuzzy-select and bucket fill find regions based on
a seed-fill algorithm. The seed fill starts at the initially
selected pixel and progresses in all directions until the
difference of pixel intensity from the original is greater than
a specified threshold. This value represents the default
threshold. This is an integer value.
(plug-in-path "${gimp_dir}/plug-ins:${gimp_plug_in_dir}/plug-ins")
Sets the plug-in search path. This is a colon-separated list of
folders to search.
(module-path "${gimp_dir}/modules:${gimp_plug_in_dir}/modules")
Sets the module search path. This is a colon-separated list of
folders to search.
(interpreter-path
"${gimp_dir}/interpreters:${gimp_plug_in_dir}/interpreters")
Sets the interpreter search path. This is a colon-separated
list of folders to search.
(environ-path "${gimp_dir}/environ:${gimp_plug_in_dir}/environ")
Sets the environ search path. This is a colon-separated list of
folders to search.
(brush-path "${gimp_dir}/brushes:${gimp_data_dir}/brushes")
Sets the brush search path. This is a colon-separated list of
folders to search.
(brush-path-writable "${gimp_dir}/brushes")
This is a colon-separated list of folders to search.
(dynamics-path "${gimp_dir}/dynamics:${gimp_data_dir}/dynamics")
Sets the dynamics search path. This is a colon-separated list
of folders to search.
(dynamics-path-writable "${gimp_dir}/dynamics")
This is a colon-separated list of folders to search.
(pattern-path "${gimp_dir}/patterns:${gimp_data_dir}/patterns")
Sets the pattern search path. This is a colon-separated list of
folders to search.
(pattern-path-writable "${gimp_dir}/patterns")
This is a colon-separated list of folders to search.
(palette-path "${gimp_dir}/palettes:${gimp_data_dir}/palettes")
Sets the palette search path. This is a colon-separated list of
folders to search.
(palette-path-writable "${gimp_dir}/palettes")
This is a colon-separated list of folders to search.
(gradient-path "${gimp_dir}/gradients:${gimp_data_dir}/gradients")
Sets the gradient search path. This is a colon-separated list
of folders to search.
(gradient-path-writable "${gimp_dir}/gradients")
This is a colon-separated list of folders to search.
(tool-preset-path "${gimp_dir}/tool-presets:${gimp_data_dir}/tool-
presets")
Sets the dynamics search path. This is a colon-separated list
of folders to search.
(tool-preset-path-writable "${gimp_dir}/tool-presets")
This is a colon-separated list of folders to search.
(font-path "${gimp_dir}/fonts:${gimp_data_dir}/fonts")
Where to look for fonts in addition to the system-wide installed
fonts. This is a colon-separated list of folders to search.
(default-brush "Round Fuzzy")
Specify a default brush. The brush is searched for in the
specified brush path. This is a string value.
(default-dynamics "Dynamics Off")
Specify a default dynamics. The dynamics is searched for in the
specified dynamics path. This is a string value.
(default-pattern "Pine")
Specify a default pattern. This is a string value.
(default-palette "Default")
Specify a default palette. This is a string value.
(default-gradient "FG to BG (RGB)")
Specify a default gradient. This is a string value.
(default-tool-preset "Current Options")
Specify a default tool preset. The tool preset is searched for
in the specified tool prests path. This is a string value.
(default-font "Sans")
Specify a default font. This is a string value.
(global-brush yes)
When enabled, the selected brush will be used for all tools.
Possible values are yes and no.
(global-dynamics yes)
When enabled, the selected dynamics will be used for all tools.
Possible values are yes and no.
(global-pattern yes)
When enabled, the selected pattern will be used for all tools.
Possible values are yes and no.
(global-palette yes)
When enabled, the selected palette will be used for all tools.
Possible values are yes and no.
(global-gradient yes)
When enabled, the selected gradient will be used for all tools.
Possible values are yes and no.
(global-font yes)
When enabled, the selected font will be used for all tools.
Possible values are yes and no.
(default-image
(width 640)
(height 400)
(unit pixels)
(xresolution 72.000000)
(yresolution 72.000000)
(resolution-unit inches)
(image-type rgb)
(fill-type background-fill)
(comment "Created with GIMP"))
Sets the default image in the "File/New" dialog. This is a
parameter list.
(default-grid
(style solid)
(fgcolor (color-rgba 0.000000 0.000000 0.000000 1.000000))
(bgcolor (color-rgba 1.000000 1.000000 1.000000 1.000000))
(xspacing 10.000000)
(yspacing 10.000000)
(spacing-unit inches)
(xoffset 0.000000)
(yoffset 0.000000)
(offset-unit inches))
Specify a default image grid. This is a parameter list.
(undo-levels 5)
Sets the minimal number of operations that can be undone. More
undo levels are kept available until the undo-size limit is
reached. This is an integer value.
(undo-size 64M)
Sets an upper limit to the memory that is used per image to keep
operations on the undo stack. Regardless of this setting, at
least as many undo-levels as configured can be undone. The
integer size can contain a suffix of 'B', 'K', 'M' or 'G' which
makes GIMP interpret the size as being specified in bytes,
kilobytes, megabytes or gigabytes. If no suffix is specified the
size defaults to being specified in kilobytes.
(undo-preview-size large)
Sets the size of the previews in the Undo History. Possible
values are tiny, extra-small, small, medium, large, extra-large,
huge, enormous and gigantic.
(plug-in-history-size 10)
How many recently used plug-ins to keep on the Filters menu.
This is an integer value.
(pluginrc-path "${gimp_dir}/pluginrc")
Sets the pluginrc search path. This is a single filename.
(layer-previews yes)
Sets whether GIMP should create previews of layers and channels.
Previews in the layers and channels dialog are nice to have but
they can slow things down when working with large images.
Possible values are yes and no.
(layer-preview-size medium)
Sets the preview size used for layers and channel previews in
newly created dialogs. Possible values are tiny, extra-small,
small, medium, large, extra-large, huge, enormous and gigantic.
(thumbnail-size normal)
Sets the size of the thumbnail shown in the Open dialog.
Possible values are none, normal and large.
(thumbnail-filesize-limit 4M)
The thumbnail in the Open dialog will be automatically updated
if the file being previewed is smaller than the size set here.
The integer size can contain a suffix of 'B', 'K', 'M' or 'G'
which makes GIMP interpret the size as being specified in bytes,
kilobytes, megabytes or gigabytes. If no suffix is specified the
size defaults to being specified in kilobytes.
(color-management
(mode display)
(display-profile-from-gdk no)
(display-rendering-intent perceptual)
(simulation-rendering-intent perceptual)
(simulation-gamut-check no)
(out-of-gamut-color (color-rgb 0.501961 0.501961 0.501961))
(display-module "CdisplayLcms"))
Defines the color management behavior. This is a parameter
list.
(color-profile-policy ask)
How to handle embedded color profiles when opening a file.
Possible values are ask, keep and convert.
(save-document-history yes)
Keep a permanent record of all opened and saved files in the
Recent Documents list. Possible values are yes and no.
(quick-mask-color (color-rgba 1.000000 0.000000 0.000000 0.500000))
Sets the default quick mask color. The color is specified in
the form (color-rgba red green blue alpha) with channel values
as floats in the range of 0.0 to 1.0.
(transparency-size medium-checks)
Sets the size of the checkerboard used to display transparency.
Possible values are small-checks, medium-checks and large-
checks.
(transparency-type gray-checks)
Sets the manner in which transparency is displayed in images.
Possible values are light-checks, gray-checks, dark-checks,
white-only, gray-only and black-only.
(snap-distance 8)
This is the distance in pixels where Guide and Grid snapping
activates. This is an integer value.
(marching-ants-speed 200)
Speed of marching ants in the selection outline. This value is
in milliseconds (less time indicates faster marching). This is
an integer value.
(resize-windows-on-zoom no)
When enabled, the image window will automatically resize itself
when zooming into and out of images. Possible values are yes
and no.
(resize-windows-on-resize no)
When enabled, the image window will automatically resize itself
whenever the physical image size changes. Possible values are
yes and no.
(default-dot-for-dot yes)
When enabled, this will ensure that each pixel of an image gets
mapped to a pixel on the screen. Possible values are yes and
no.
(initial-zoom-to-fit yes)
When enabled, this will ensure that the full image is visible
after a file is opened, otherwise it will be displayed with a
scale of 1:1. Possible values are yes and no.
(perfect-mouse yes)
When enabled, the X server is queried for the mouse's current
position on each motion event, rather than relying on the
position hint. This means painting with large brushes should be
more accurate, but it may be slower. Conversely, on some X
servers enabling this option results in faster painting.
Possible values are yes and no.
(cursor-mode tool-icon)
Sets the type of mouse pointers to use. Possible values are
tool-icon, tool-crosshair and crosshair.
(cursor-updating yes)
Context-dependent mouse pointers are helpful. They are enabled
by default. However, they require overhead that you may want to
do without. Possible values are yes and no.
(show-brush-outline yes)
When enabled, all paint tools will show a preview of the current
brush's outline. Possible values are yes and no.
(show-paint-tool-cursor yes)
When enabled, the mouse pointer will be shown over the image
while using a paint tool. Possible values are yes and no.
(image-title-format "%D*%f-%p.%i (%t, %L) %wx%h")
Sets the text to appear in image window titles. This is a
format string; certain % character sequences are recognised and
expanded as follows:
%% literal percent sign
%f bare filename, or "Untitled"
%F full path to file, or "Untitled"
%p PDB image id
%i view instance number
%t image type (RGB, grayscale, indexed)
%z zoom factor as a percentage
%s source scale factor
%d destination scale factor
%Dx expands to x if the image is dirty, the empty string
otherwise
%Cx expands to x if the image is clean, the empty string
otherwise
%B expands to (modified) if the image is dirty, the empty
string otherwise
%A expands to (clean) if the image is clean, the empty string
otherwise
%l the number of layers
%L the number of layers (long form)
%m memory used by the image
%n the name of the active layer/channel
%P the PDB id of the active layer/channel
%w image width in pixels
%W image width in real-world units
%h image height in pixels
%H image height in real-world units
%M the image size expressed in megapixels
%u unit symbol
%U unit abbreviation
(image-status-format "%n (%m)")
Sets the text to appear in image window status bars. This is a
format string; certain % character sequences are recognised and
expanded as follows:
%% literal percent sign
%f bare filename, or "Untitled"
%F full path to file, or "Untitled"
%p PDB image id
%i view instance number
%t image type (RGB, grayscale, indexed)
%z zoom factor as a percentage
%s source scale factor
%d destination scale factor
%Dx expands to x if the image is dirty, the empty string
otherwise
%Cx expands to x if the image is clean, the empty string
otherwise
%B expands to (modified) if the image is dirty, the empty
string otherwise
%A expands to (clean) if the image is clean, the empty string
otherwise
%l the number of layers
%L the number of layers (long form)
%m memory used by the image
%n the name of the active layer/channel
%P the PDB id of the active layer/channel
%w image width in pixels
%W image width in real-world units
%h image height in pixels
%H image height in real-world units
%M the image size expressed in megapixels
%u unit symbol
%U unit abbreviation
(monitor-xresolution 96.000000)
Sets the monitor's horizontal resolution, in dots per inch. If
set to 0, forces the X server to be queried for both horizontal
and vertical resolution information. This is a float value.
(monitor-yresolution 96.000000)
Sets the monitor's vertical resolution, in dots per inch. If
set to 0, forces the X server to be queried for both horizontal
and vertical resolution information. This is a float value.
(monitor-resolution-from-windowing-system yes)
When enabled, GIMP will use the monitor resolution from the
windowing system. Possible values are yes and no.
(navigation-preview-size medium)
Sets the size of the navigation preview available in the lower
right corner of the image window. Possible values are tiny,
extra-small, small, medium, large, extra-large, huge, enormous
and gigantic.
(default-view
(show-menubar yes)
(show-statusbar yes)
(show-rulers yes)
(show-scrollbars yes)
(show-selection yes)
(show-layer-boundary yes)
(show-guides yes)
(show-grid no)
(show-sample-points yes)
(padding-mode default)
(padding-color (color-rgb 1.000000 1.000000 1.000000)))
Sets the default settings for the image view. This is a
parameter list.
(default-fullscreen-view
(show-menubar yes)
(show-statusbar yes)
(show-rulers yes)
(show-scrollbars yes)
(show-selection yes)
(show-layer-boundary yes)
(show-guides yes)
(show-grid no)
(show-sample-points yes)
(padding-mode default)
(padding-color (color-rgb 1.000000 1.000000 1.000000)))
Sets the default settings used when an image is viewed in
fullscreen mode. This is a parameter list.
(default-snap-to-guides yes)
Snap to guides by default in new image windows. Possible values
are yes and no.
(default-snap-to-grid no)
Snap to the grid by default in new image windows. Possible
values are yes and no.
(default-snap-to-canvas no)
Snap to the canvas edge by default in new image windows.
Possible values are yes and no.
(default-snap-to-path no)
Snap to the active path by default in new image windows.
Possible values are yes and no.
(activate-on-focus yes)
When enabled, an image will become the active image when its
image window receives the focus. This is useful for window
managers using "click to focus".
Possible values are yes and no.
(space-bar-action pan)
What to do when the space bar is pressed in the image window.
Possible values are none, pan and move.
(zoom-quality high)
There's a tradeoff between speed and quality of the zoomed-out
display. Possible values are low and high.
(use-event-history no)
Bugs in event history buffer are frequent so in case of cursor
offset problems turning it off helps. Possible values are yes
and no.
(move-tool-changes-active no)
If enabled, the move tool sets the edited layer or path as
active. This used to be the default behaviour in older
versions. Possible values are yes and no.
(image-map-tool-max-recent 10)
How many recent settings to keep around in color correction
tools This is an integer value.
(trust-dirty-flag no)
When enabled, GIMP will not save an image if it has not been
changed since it was opened. Possible values are yes and no.
(save-device-status no)
Remember the current tool, pattern, color, and brush across GIMP
sessions. Possible values are yes and no.
(save-session-info yes)
Save the positions and sizes of the main dialogs when GIMP
exits. Possible values are yes and no.
(restore-session yes)
Let GIMP try to restore your last saved session on each startup.
Possible values are yes and no.
(save-tool-options no)
Save the tool options when GIMP exits. Possible values are yes
and no.
(show-tooltips yes)
Show a tooltip when the pointer hovers over an item. Possible
values are yes and no.
(tearoff-menus yes)
When enabled, menus can be torn off. Possible values are yes
and no.
(can-change-accels no)
When enabled, you can change keyboard shortcuts for menu items
by hitting a key combination while the menu item is highlighted.
Possible values are yes and no.
(save-accels yes)
Save changed keyboard shortcuts when GIMP exits. Possible
values are yes and no.
(restore-accels yes)
Restore saved keyboard shortcuts on each GIMP startup. Possible
values are yes and no.
(last-opened-size 10)
How many recently opened image filenames to keep on the File
menu. This is an integer value.
(max-new-image-size 128M)
GIMP will warn the user if an attempt is made to create an image
that would take more memory than the size specified here. The
integer size can contain a suffix of 'B', 'K', 'M' or 'G' which
makes GIMP interpret the size as being specified in bytes,
kilobytes, megabytes or gigabytes. If no suffix is specified the
size defaults to being specified in kilobytes.
(toolbox-color-area yes)
Show the current foreground and background colors in the
toolbox. Possible values are yes and no.
(toolbox-foo-area no)
Show the currently selected brush, pattern and gradient in the
toolbox. Possible values are yes and no.
(toolbox-image-area no)
Show the currently active image in the toolbox. Possible values
are yes and no.
(toolbox-wilber yes)
Show the GIMP mascot at the top of the toolbox. Possible values
are yes and no.
(theme-path "${gimp_dir}/themes:${gimp_data_dir}/themes")
Sets the theme search path. This is a colon-separated list of
folders to search.
(theme "Default")
The name of the theme to use. This is a string value.
(use-help yes)
When enabled, pressing F1 will open the help browser. Possible
values are yes and no.
(show-help-button yes)
When enabled, dialogs will show a help button that gives access
to the related help page. Without this button, the help page
can still be reached by pressing F1. Possible values are yes
and no.
(help-locales "")
Specifies the language preferences used by the help system. This
is a colon-separated list of language identifiers with
decreasing priority. If empty, the language is taken from the
user's locale setting. This is a string value.
(help-browser gimp)
Sets the browser used by the help system. Possible values are
gimp and web-browser.
(user-manual-online no)
When enabled, the online user manual will be used by the help
system. Otherwise the locally installed copy is used. Possible
values are yes and no.
(user-manual-online-uri "http://docs.gimp.org/2.8")
The location of the online user manual. This is used if 'user-
manual-online' is enabled. This is a string value.
(dock-window-hint utility)
The window type hint that is set on dock windows and the toolbox
window. This may affect the way your window manager decorates
and handles these windows. Possible values are normal, utility
and keep-above.
(cursor-format pixbuf)
Sets the pixel format to use for mouse pointers. Possible
values are bitmap and pixbuf.
(cursor-handedness right)
Sets the handedness for cursor positioning. Possible values are
left and right.
(fractalexplorer-path
"${gimp_dir}/fractalexplorer:${gimp_data_dir}/fractalexplorer")
Where to search for fractals used by the Fractal Explorer plug-
in. This is a colon-separated list of folders to search.
(gfig-path "${gimp_dir}/gfig:${gimp_data_dir}/gfig")
Where to search for Gfig figures used by the Gfig plug-in. This
is a colon-separated list of folders to search.
(gflare-path "${gimp_dir}/gflare:${gimp_data_dir}/gflare")
Where to search for gflares used by the GFlare plug-in. This is
a colon-separated list of folders to search.
(gimpressionist-path
"${gimp_dir}/gimpressionist:${gimp_data_dir}/gimpressionist")
Where to search for data used by the Gimpressionist plug-in.
This is a colon-separated list of folders to search.
(script-fu-path "${gimp_dir}/scripts:${gimp_data_dir}/scripts")
This path will be searched for scripts when the Script-Fu plug-
in is run. This is a colon-separated list of folders to search.
PATH EXPANSION
Strings of type PATH are expanded in a manner similar to bash(1). Specifically: tilde (~) is expanded to the user's home directory. Note that the bash feature of being able to refer to other user's home directories by writing ~userid/ is not valid in this file. ${variable} is expanded to the current value of an environment variable. There are a few variables that are pre-defined: gimp_dir The personal gimp directory which is set to the value of the environment variable GIMP2_DIRECTORY or to ~/.gimp-2.8. gimp_data_dir Base for paths to shareable data, which is set to the value of the environment variable GIMP2_DATADIR or to the compiled-in default value ${datarootdir}/gimp/2.0. gimp_plug_in_dir Base to paths for architecture-specific plugins and modules, which is set to the value of the environment variable GIMP2_PLUGINDIR or to the compiled-in default value ${exec_prefix}/lib/gimp/2.0. gimp_sysconf_dir Path to configuration files, which is set to the value of the environment variable GIMP2_SYSCONFDIR or to the compiled-in default value /etc/gimp/2.0.
FILES
/etc/gimp/2.0/gimprc
System-wide configuration file
$HOME/.gimp-2.8/gimprc
Per-user configuration file
SEE ALSO
gimp(1)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
