fuser(1)
NAME
fuser - identify processes using files or sockets
SYNOPSIS
fuser [-fuv] [-a|-s] [-4|-6] [-c|-m|-n space] [ -k [-i] [-M] [-w] [-SIGNAL] ] name ... fuser -l fuser -V
DESCRIPTION
fuser displays the PIDs of processes using the specified files or file
systems. In the default display mode, each file name is followed by a
letter denoting the type of access:
c current directory.
e executable being run.
f open file. f is omitted in default display mode.
F open file for writing. F is omitted in default display
mode.
r root directory.
m mmap'ed file or shared library.
fuser returns a non-zero return code if none of the specified files is
accessed or in case of a fatal error. If at least one access has been
found, fuser returns zero.
In order to look up processes using TCP and UDP sockets, the
corresponding name space has to be selected with the -n option. By
default fuser will look in both IPv6 and IPv4 sockets. To change the
default, behavior, use the -4 and -6 options. The socket(s) can be
specified by the local and remote port, and the remote address. All
fields are optional, but commas in front of missing fields must be
present:
[lcl_port][,[rmt_host][,[rmt_port]]]
Either symbolic or numeric values can be used for IP addresses and port
numbers.
fuser outputs only the PIDs to stdout, everything else is sent to
stderr.
OPTIONS
-a, --all
Show all files specified on the command line. By default, only
files that are accessed by at least one process are shown.
-c Same as -m option, used for POSIX compatibility.
-f Silently ignored, used for POSIX compatibility.
-k, --kill
Kill processes accessing the file. Unless changed with -SIGNAL,
SIGKILL is sent. An fuser process never kills itself, but may
kill other fuser processes. The effective user ID of the
process executing fuser is set to its real user ID before
attempting to kill.
-i, --interactive
Ask the user for confirmation before killing a process. This
option is silently ignored if -k is not present too.
-l, --list-signals
List all known signal names.
-m NAME, --mount NAME
NAME specifies a file on a mounted file system or a block device
that is mounted. All processes accessing files on that file
system are listed. If a directory file is specified, it is
automatically changed to NAME/. to use any file system that
might be mounted on that directory.
-M, --ismountpoint
Request will be fulfilled only if NAME specifies a mountpoint.
This is an invaluable seatbelt which prevents you from killing
the machine if NAME happens to not be a filesystem.
-w Kill only processes which have write access. This option is
silently ignored if -k is not present too.
-n SPACE, --namespace SPACE
Select a different name space. The name spaces file (file
names, the default), udp (local UDP ports), and tcp (local TCP
ports) are supported. For ports, either the port number or the
symbolic name can be specified. If there is no ambiguity, the
shortcut notation name/space (e.g. 80/tcp) can be used.
-s, --silent
Silent operation. -u and -v are ignored in this mode. -a must
not be used with -s.
-SIGNAL
Use the specified signal instead of SIGKILL when killing
processes. Signals can be specified either by name (e.g.
-HUP)orby number (e.g. -1). This option is silently ignored if
the -k option is not used.
-u, --user
Append the user name of the process owner to each PID.
-v, --verbose
Verbose mode. Processes are shown in a ps-like style. The
fields PID, USER and COMMAND are similar to ps. ACCESS shows
how the process accesses the file. Verbose mode will also show
when a particular file is being access as a mount point, knfs
export or swap file. In this case kernel is shown instead of
the PID.
-V, --version
Display version information.
-4, --ipv4
Search only for IPv4 sockets. This option must not be used with
the -6 option and only has an effect with the tcp and udp
namespaces.
-6, --ipv6
Search only for IPv6 sockets. This option must not be used with
the -4 option and only has an effect with the tcp and udp
namespaces.
- Reset all options and set the signal back to SIGKILL.
FILES
/proc location of the proc file system
EXAMPLES
fuser -km /home
kills all processes accessing the file system /home in any way.
if fuser -s /dev/ttyS1; then :; else something; fi
invokes something if no other process is using /dev/ttyS1.
fuser telnet/tcp
shows all processes at the (local) TELNET port.
RESTRICTIONS
Processes accessing the same file or file system several times in the same way are only shown once. If the same object is specified several times on the command line, some of those entries may be ignored. fuser may only be able to gather partial information unless run with privileges. As a consequence, files opened by processes belonging to other users may not be listed and executables may be classified as mapped only. Installing fuser SUID root will avoid problems associated with partial information, but may be undesirable for security and privacy reasons. udp and tcp name spaces, and UNIX domain sockets can't be searched with kernels older than 1.3.78. Accesses by the kernel are only shown with the -v option. The -k option only works on processes. If the user is the kernel, fuser will print an advice, but take no action beyond that.
BUGS
fuser -m /dev/sgX will show (or kill with the -k flag) all processes, even if you don't have that device configured. There may be other devices it does this for too. fuser cannot report on any processes that it doesn't have permission to look at the file descriptor table for. The most common time this problem occurs is when looking for TCP or UDP sockets when running fuser as a non-root user. In this case fuser will report no access The mount -m option will match any file within the save device as the specified file, use the -M option as well if you mean to specify only the mount point.
SEE ALSO
kill(1), killall(1), lsof(8), pkill(1), ps(1), kill(2).
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
