formail(1)
NAME
formail - mail (re)formatter
SYNOPSIS
formail [+skip] [-total] [-bczfrktedqBY] [-p prefix]
[-D maxlen idcache]
[-l folder]
[-x headerfield] [-X headerfield]
[-a headerfield] [-A headerfield]
[-i headerfield] [-I headerfield]
[-u headerfield] [-U headerfield]
[-R oldfield newfield]
[-n [maxprocs ]] [-m minfields] [-s [command [arg ...]]]
formail -v
DESCRIPTION
formail is a filter that can be used to force mail into mailbox format, perform `From ' escaping, generate auto-replying headers, do simple header munging/extracting or split up a mailbox/digest/articles file. The mail/mailbox/article contents will be expected on stdin. If formail is supposed to determine the sender of the mail, but is unable to find any, it will substitute `foo@bar'. If formail is started without any command line options, it will force any mail coming from stdin into mailbox format and will escape all bogus `From ' lines with a `>'.
OPTIONS
-v Formail will print its version number and exit.
-b Don't escape any bogus mailbox headers (i.e., lines starting with
`From ').
-p prefix
Define a different quotation prefix. If unspecified it defaults
to `>'.
-Y Assume traditional Berkeley mailbox format, ignoring any Content-
Length: fields.
-c Concatenate continued fields in the header. Might be convenient
when postprocessing mail with standard (line oriented) text
utilities.
-z Ensure a whitespace exists between field name and content. Zap
fields which contain only a single whitespace character. Zap
leading and trailing whitespace on fields extracted with -x.
-f Force formail to simply pass along any non-mailbox format (i.e.,
don't generate a `From ' line as the first line).
-r Generate an auto-reply header. This will normally throw away all
the existing fields (except X-Loop:) in the original message,
fields you wish to preserve need to be named using the -i option.
If you use this option in conjunction with -k, you can prevent the
body from being `escaped' by also specifying -b.
-k When generating the auto-reply header or when extracting fields,
keep the body as well.
-t Trust the sender to have used a valid return address in his
header. This causes formail to select the header sender instead
of the envelope sender for the reply. This option should be used
when generating auto-reply headers from news articles or when the
sender of the message is expecting a reply.
-s The input will be split up into separate mail messages, and piped
into a program one by one (a new program is started for every
part). -s has to be the last option specified, the first argument
following it is expected to be the name of a program, any other
arguments will be passed along to it. If you omit the program,
then formail will simply concatenate the split mails on stdout
again. See FILENO.
-n [maxprocs]
Tell formail not to wait for every program to finish before
starting the next (causes splits to be processed in parallel).
Maxprocs optionally specifies an upper limit on the number of
concurrently running processes.
-e Do not require empty lines to be preceding the header of a new
message (i.e., the messages could start on every line).
-d Tell formail that the messages it is supposed to split need not be
in strict mailbox format (i.e., allows you to split
digests/articles or non-standard mailbox formats). This disables
recognition of the Content-Length: field.
-l folder
Generate a log summary in the same style as procmail. This
includes the entire "From " line, the Subject: header field, the
folder, and the size of the message in bytes. The mailstat
command can be used to summarize logs in this format.
-B Makes formail assume that it is splitting up a BABYL rmail file.
-m minfields
Allows you to specify the number of consecutive headerfields
formail needs to find before it decides it found the start of a
new message, it defaults to 2.
-q Tells formail to (still detect but) be quiet about write errors,
duplicate messages and mismatched Content-Length: fields. This
option is on by default, to make it display the messages use -q-.
-D maxlen idcache
Formail will detect if the Message-ID of the current message has
already been seen using an idcache file of approximately maxlen
size. If not splitting, it will return success if a duplicate has
been found. If splitting, it will not output duplicate messages.
If used in conjunction with -r, formail will look at the mail
address of the envelope sender instead at the Message-ID.
-x headerfield
Extract the contents of this headerfield from the header. Line
continuations will be left intact; if you want the value on a
single line then you'll also need the -c option.
-X headerfield
Same as -x, but also preserves/includes the field name.
-a headerfield
Append a custom headerfield onto the header; but only if a similar
field does not exist yet. If you specify either one of the field
names Message-ID: or Resent-Message-ID: with no field contents,
then formail will generate a unique message-ID for you.
-A headerfield
Append a custom headerfield onto the header in any case.
-i headerfield
Same as -A, except that any existing similar fields are renamed by
prepending an ``Old-'' prefix. If headerfield consists only of a
field-name, it will not be appended.
-I headerfield
Same as -i, except that any existing similar fields are simply
removed. If headerfield consists only of a field-name, it
effectively deletes the field.
-u headerfield
Make the first occurrence of this field unique, and thus delete
all subsequent occurrences of it.
-U headerfield
Make the last occurrence of this field unique, and thus delete all
preceding occurrences of it.
-R oldfield newfield
Renames all occurrences of the fieldname oldfield into newfield.
+skip
Skip the first skip messages while splitting.
-total
Output at most total messages while splitting.
NOTES
When renaming, removing, or extracting fields, partial fieldnames may
be used to specify all fields that start with the specified value.
By default, when generating an auto-reply header procmail selects the
envelope sender from the input message. This is correct for vacation
messages and other automatic replies regarding the routing or delivery
of the original message. If the sender is expecting a reply or the
reply is being generated in response to the contents of the original
message then the -t option should be used.
RFC822, the original standard governing the format of Internet mail
messages, did not specify whether Resent header fields (those that
begin with `Resent-', such as `Resent-From:') should be considered when
generating a reply. Since then, the recommended usage of the Resent
headers has evolved to consider them as purely informational and not
for use when generating a reply. This has been codified in RFC2822,
the new Internet Message Format standard, which states in part:
Resent fields are used to identify a message as having been
reintroduced into the transport system by a user. The purpose
of using resent fields is to have the message appear to the
final recipient as if it were sent directly by the original
sender, with all of the original fields remaining the
same....They MUST NOT be used in the normal processing of
replies or other such automatic actions on messages.
While formail now ignores Resent headers when generating header
replies, versions of formail prior to 3.14 gave such headers a high
precedence. If the old behavior is needed for established applications
it can be specified by calling formail with the option `-a Resent-' in
addition to the -r and -t options. This usage is deprecated and should
not be used in new applications.
ENVIRONMENT
FILENO
While splitting, formail assigns the message number currently
being output to this variable. By presetting FILENO, you can
change the initial message number being used and the width of the
zero-padded output. If FILENO is unset it will default to 000.
If FILENO is non-empty and does not contain a number, FILENO
generation is disabled.
EXAMPLES
To split up a digest one usually uses:
formail +1 -ds >>the_mailbox_of_your_choice
or
formail +1 -ds procmail
To remove all Received: fields from the header:
formail -I Received:
To remove all fields except From: and Subject: from the header:
formail -k -X From: -X Subject:
To supersede the Reply-To: field in a header you could use:
formail -i "Reply-To: foo@bar"
To convert a non-standard mailbox file into a standard mailbox file you
can use:
formail -ds <old_mailbox >>new_mailbox
Or, if you have a very tolerant mailer:
formail -a Date: -ds <old_mailbox >>new_mailbox
To extract the header from a message:
formail -X ""
or
sed -e '/^$/ q'
To extract the body from a message:
formail -I ""
or
sed -e '1,/^$/ d'
SEE ALSO
mail(1), sendmail(8), procmail(1), sed(1), sh(1), RFC822, RFC2822, RFC1123
DIAGNOSTICS
Can't fork Too many processes on this machine.
Content-Length: field exceeds actual length by nnn bytes
The Content-Length: field in the header
specified a length that was longer than the
actual body. This causes this message to absorb
a number of subsequent messages following it in
the same mailbox.
Couldn't write to stdout
The program that formail was trying to pipe into
didn't accept all the data formail sent to it;
this diagnostic can be suppressed by the -q
option.
Duplicate key found: x The Message-ID or sender x in this message was
found in the idcache; this diagnostic can be
suppressed by the -q option.
Failed to execute "x" Program not in path, or not executable.
File table full Too many open files on this machine.
Invalid field-name: "x"
The specified field-name "x" contains control
characters, or cannot be a partial field-name
for this option.
WARNINGS
You can save yourself and others a lot of grief if you try to avoid using this autoreply feature on mails coming through mailinglists. Depending on the format of the incoming mail (which in turn depends on both the original sender's mail agent and the mailinglist setup) formail could decide to generate an autoreply header that replies to the list. In the tradition of UN*X utilities, formail will do exactly what you ask it to, even if it results in a non-RFC822 compliant message. In particular, formail will let you generate header fields whose name ends in a space instead of a colon. While this is correct for the leading `From ' line, that line is not a header field so much as the message separator for the mbox mailbox format. Multiple occurrences of such a line or any other colonless header field will be considered by many mail programs, including formail itself, as the beginning of a new message. Others will consider the message to be corrupt. Because of this, you should not use the -i option with the `From ' line as the resulting renamed line, `Old-From ', will probably not do what you want it to. If you want to save the original `From ' line, rename it with the -R option to a legal header field such as `X-From_:'.
BUGS
When formail has to generate a leading `From ' line it normally will contain the current date. If formail is given the option `-a Date:', it will use the date from the `Date:' field in the header (if present). However, since formail copies it verbatim, the format will differ from that expected by most mail readers. If formail is instructed to delete or rename the leading `From ' line, it will not automatically regenerate it as usual. To force formail to regenerate it in this case, include -a 'From '. If formail is not called as the first program in a pipe and it is told to split up the input in several messages, then formail will not terminate until the program it receives the input from closes its output or terminates itself. If formail is instructed to generate an autoreply mail, it will never put more than one address in the `To:' field.
MISCELLANEOUS
Formail is eight-bit clean.
When formail has to determine the sender's address, every RFC822
conforming mail address is allowed. Formail will always strip down the
address to its minimal form (deleting excessive comments and
whitespace).
The regular expression that is used to find `real' postmarks is:
"\n\nFrom [\t ]*[^\t\n ]+[\t ]+[^\n\t ]"
If a Content-Length: field is found in a header, formail will copy the
number of specified bytes in the body verbatim before resuming the
regular scanning for message boundaries (except when splitting digests
or Berkeley mailbox format is assumed).
Any header lines immediately following the leading `From ' line that
start with `>From ' are considered to be a continuation of the `From '
line. If instructed to rename the `From ' line, formail will change
each leading `>' into a space, thereby transforming those lines into
normal RFC822 continuations.
NOTES
Calling up formail with the -h or -? options will cause it to display a command-line help page.
SOURCE
This program is part of the procmail mail-processing-package (v3.23pre) available at http://www.procmail.org/ or ftp.procmail.org in pub/procmail/.
MAILINGLIST
There exists a mailinglist for questions relating to any program in the
procmail package:
<[email protected]>
for submitting questions/answers.
<[email protected]>
for subscription requests.
If you would like to stay informed about new versions and official
patches send a subscription request to
[email protected]
(this is a readonly list).
AUTHORS
Stephen R. van den Berg
<[email protected]>
Philip A. Guenther
<[email protected]>
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
