eventfd(2)
NAME
eventfd - create a file descriptor for event notification
SYNOPSIS
#include <sys/eventfd.h> int eventfd(unsigned int initval, int flags);
DESCRIPTION
eventfd() creates an "eventfd object" that can be used as an event
wait/notify mechanism by user-space applications, and by the kernel to
notify user-space applications of events. The object contains an
unsigned 64-bit integer (uint64_t) counter that is maintained by the
kernel. This counter is initialized with the value specified in the
argument initval.
The following values may be bitwise ORed in flags to change the
behavior of eventfd():
EFD_CLOEXEC (since Linux 2.6.27)
Set the close-on-exec (FD_CLOEXEC) flag on the new file
descriptor. See the description of the O_CLOEXEC flag in
open(2) for reasons why this may be useful.
EFD_NONBLOCK (since Linux 2.6.27)
Set the O_NONBLOCK file status flag on the new open file
description. Using this flag saves extra calls to fcntl(2) to
achieve the same result.
EFD_SEMAPHORE (since Linux 2.6.30)
Provide semaphore-like semantics for reads from the new file
descriptor. See below.
In Linux up to version 2.6.26, the flags argument is unused, and must
be specified as zero.
As its return value, eventfd() returns a new file descriptor that can
be used to refer to the eventfd object. The following operations can
be performed on the file descriptor:
read(2)
Each successful read(2) returns an 8-byte integer. A read(2)
will fail with the error EINVAL if the size of the supplied
buffer is less than 8 bytes.
The value returned by read(2) is in host byte order---that is, the
native byte order for integers on the host machine.
The semantics of read(2) depend on whether the eventfd counter
currently has a nonzero value and whether the EFD_SEMAPHORE flag
was specified when creating the eventfd file descriptor:
* If EFD_SEMAPHORE was not specified and the eventfd counter
has a nonzero value, then a read(2) returns 8 bytes
containing that value, and the counter's value is reset to
zero.
* If EFD_SEMAPHORE was specified and the eventfd counter has a
nonzero value, then a read(2) returns 8 bytes containing the
value 1, and the counter's value is decremented by 1.
* If the eventfd counter is zero at the time of the call to
read(2), then the call either blocks until the counter
becomes nonzero (at which time, the read(2) proceeds as
described above) or fails with the error EAGAIN if the file
descriptor has been made nonblocking.
write(2)
A write(2) call adds the 8-byte integer value supplied in its
buffer to the counter. The maximum value that may be stored in
the counter is the largest unsigned 64-bit value minus 1 (i.e.,
0xfffffffffffffffe). If the addition would cause the counter's
value to exceed the maximum, then the write(2) either blocks
until a read(2) is performed on the file descriptor, or fails
with the error EAGAIN if the file descriptor has been made
nonblocking.
A write(2) will fail with the error EINVAL if the size of the
supplied buffer is less than 8 bytes, or if an attempt is made
to write the value 0xffffffffffffffff.
poll(2), select(2) (and similar)
The returned file descriptor supports poll(2) (and analogously
epoll(7)) and select(2), as follows:
* The file descriptor is readable (the select(2) readfds
argument; the poll(2) POLLIN flag) if the counter has a value
greater than 0.
* The file descriptor is writable (the select(2) writefds
argument; the poll(2) POLLOUT flag) if it is possible to
write a value of at least "1" without blocking.
* If an overflow of the counter value was detected, then
select(2) indicates the file descriptor as being both
readable and writable, and poll(2) returns a POLLERR event.
As noted above, write(2) can never overflow the counter.
However an overflow can occur if 2^64 eventfd "signal posts"
were performed by the KAIO subsystem (theoretically possible,
but practically unlikely). If an overflow has occurred, then
read(2) will return that maximum uint64_t value (i.e.,
0xffffffffffffffff).
The eventfd file descriptor also supports the other file-
descriptor multiplexing APIs: pselect(2) and ppoll(2).
close(2)
When the file descriptor is no longer required it should be
closed. When all file descriptors associated with the same
eventfd object have been closed, the resources for object are
freed by the kernel.
A copy of the file descriptor created by eventfd() is inherited by the
child produced by fork(2). The duplicate file descriptor is associated
with the same eventfd object. File descriptors created by eventfd()
are preserved across execve(2), unless the close-on-exec flag has been
set.
RETURN VALUE
On success, eventfd() returns a new eventfd file descriptor. On error, -1 is returned and errno is set to indicate the error.
ERRORS
EINVAL An unsupported value was specified in flags.
EMFILE The per-process limit on the number of open file descriptors has
been reached.
ENFILE The system-wide limit on the total number of open files has been
reached.
ENODEV Could not mount (internal) anonymous inode device.
ENOMEM There was insufficient memory to create a new eventfd file
descriptor.
VERSIONS
eventfd() is available on Linux since kernel 2.6.22. Working support is provided in glibc since version 2.8. The eventfd2() system call (see NOTES) is available on Linux since kernel 2.6.27. Since version 2.9, the glibc eventfd() wrapper will employ the eventfd2() system call, if it is supported by the kernel.
ATTRIBUTES
For an explanation of the terms used in this section, see attributes(7). Interface Attribute Value eventfd() Thread safety MT-Safe
CONFORMING TO
eventfd() and eventfd2() are Linux-specific.
NOTES
Applications can use an eventfd file descriptor instead of a pipe (see pipe(2)) in all cases where a pipe is used simply to signal events. The kernel overhead of an eventfd file descriptor is much lower than that of a pipe, and only one file descriptor is required (versus the two required for a pipe). When used in the kernel, an eventfd file descriptor can provide a bridge from kernel to user space, allowing, for example, functionalities like KAIO (kernel AIO) to signal to a file descriptor that some operation is complete. A key point about an eventfd file descriptor is that it can be monitored just like any other file descriptor using select(2), poll(2), or epoll(7). This means that an application can simultaneously monitor the readiness of "traditional" files and the readiness of other kernel mechanisms that support the eventfd interface. (Without the eventfd() interface, these mechanisms could not be multiplexed via select(2), poll(2), or epoll(7).) The current value of an eventfd counter can be viewed via the entry for the corresponding file descriptor in the process's /proc/[pid]/fdinfo directory. See proc(5) for further details. C library/kernel differences There are two underlying Linux system calls: eventfd() and the more recent eventfd2(). The former system call does not implement a flags argument. The latter system call implements the flags values described above. The glibc wrapper function will use eventfd2() where it is available. Additional glibc features The GNU C library defines an additional type, and two functions that attempt to abstract some of the details of reading and writing on an eventfd file descriptor: typedef uint64_t eventfd_t; int eventfd_read(int fd, eventfd_t *value); int eventfd_write(int fd, eventfd_t value); The functions perform the read and write operations on an eventfd file descriptor, returning 0 if the correct number of bytes was transferred, or -1 otherwise.
EXAMPLE
The following program creates an eventfd file descriptor and then forks
to create a child process. While the parent briefly sleeps, the child
writes each of the integers supplied in the program's command-line
arguments to the eventfd file descriptor. When the parent has finished
sleeping, it reads from the eventfd file descriptor.
The following shell session shows a sample run of the program:
$ ./a.out 1 2 4 7 14
Child writing 1 to efd
Child writing 2 to efd
Child writing 4 to efd
Child writing 7 to efd
Child writing 14 to efd
Child completed write loop
Parent about to read
Parent read 28 (0x1c) from efd
Program source
#include <sys/eventfd.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#include <stdint.h> /* Definition of uint64_t */
#define handle_error(msg) \
do { perror(msg); exit(EXIT_FAILURE); } while (0)
int
main(int argc, char *argv[])
{
int efd, j;
uint64_t u;
ssize_t s;
if (argc < 2) {
fprintf(stderr, "Usage: %s <num>...\n", argv[0]);
exit(EXIT_FAILURE);
}
efd = eventfd(0, 0);
if (efd == -1)
handle_error("eventfd");
switch (fork()) {
case 0:
for (j = 1; j < argc; j++) {
printf("Child writing %s to efd\n", argv[j]);
u = strtoull(argv[j], NULL, 0);
/* strtoull() allows various bases */
s = write(efd, &u, sizeof(uint64_t));
if (s != sizeof(uint64_t))
handle_error("write");
}
printf("Child completed write loop\n");
exit(EXIT_SUCCESS);
default:
sleep(2);
printf("Parent about to read\n");
s = read(efd, &u, sizeof(uint64_t));
if (s != sizeof(uint64_t))
handle_error("read");
printf("Parent read %llu (0x%llx) from efd\n",
(unsigned long long) u, (unsigned long long) u);
exit(EXIT_SUCCESS);
case -1:
handle_error("fork");
}
}
SEE ALSO
futex(2), pipe(2), poll(2), read(2), select(2), signalfd(2), timerfd_create(2), write(2), epoll(7), sem_overview(7)
COLOPHON
This page is part of release 4.09 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
