dump2dcm(1)
NAME
dump2dcm - Convert ASCII dump to DICOM file
SYNOPSIS
dump2dcm [options] dumpfile-in dcmfile-out
DESCRIPTION
The dump2dcm utility converts an ASCII dump file to a DICOM file. The dump file has the same format as the output of dcmdump. Thus it is possible to capture the output of dcmdump into a file, modify some attributes and create a new DICOM file.
PARAMETERS
dumpfile-in dump input filename dcmfile-out DICOM output filename
OPTIONS
general options
-h --help
print this help text and exit
--version
print version information and exit
--arguments
print expanded command line arguments
-q --quiet
quiet mode, print no warnings and errors
-v --verbose
verbose mode, print processing details
-d --debug
debug mode, print debug information
-ll --log-level [l]evel: string constant
(fatal, error, warn, info, debug, trace)
use level l for the logger
-lc --log-config [f]ilename: string
use config file f for the logger
input options
input file format:
+f --read-meta-info
read meta information if present (default)
-f --ignore-meta-info
ignore file meta information
file contents byte ordering:
+rl --read-file-little
read OW data with little endian (default)
+rb --read-file-big
read OW data from file with big endian
other input options:
+l --line [m]ax-length: integer
maximum line length m (default: 4096)
processing options
unique identifiers:
+Ug --generate-new-uids
generate new Study/Series/SOP Instance UID
-Uo --dont-overwrite-uids
do not overwrite existing UIDs (default)
+Uo --overwrite-uids
overwrite existing UIDs
output options
output file format:
+F --write-file
write file format (default)
-F --write-dataset
write data set without file meta information
+Fu --update-meta-info
update particular file meta information
output transfer syntax:
+t= --write-xfer-same
write with same TS as input (default)
+te --write-xfer-little
write with explicit VR little endian
+tb --write-xfer-big
write with explicit VR big endian TS
+ti --write-xfer-implicit
write with implicit VR little endian TS
+td --write-xfer-deflated
write with deflated explicit VR little endian TS
error handling:
-E --stop-on-error
do not write if dump is damaged (default)
+E --ignore-errors
attempt to write even if dump is damaged
post-1993 value representations:
+u --enable-new-vr
enable support for new VRs (UN/UT) (default)
-u --disable-new-vr
disable support for new VRs, convert to OB
group length encoding:
+g= --group-length-recalc
recalculate group lengths if present (default)
+g --group-length-create
always write with group length elements
-g --group-length-remove
always write without group length elements
length encoding in sequences and items:
+e --length-explicit
write with explicit lengths (default)
-e --length-undefined
write with undefined lengths
data set trailing padding (not with --write-dataset):
-p= --padding-retain
do not change padding (default if not --write-dataset)
-p --padding-off
no padding (implicit if --write-dataset)
+p --padding-create [f]ile-pad [i]tem-pad: integer
align file on multiple of f bytes
and items on multiple of i bytes
deflate compression level (only with --write-xfer-deflated):
+cl --compression-level [l]evel: integer (default: 6)
0=uncompressed, 1=fastest, 9=best compression
NOTES
Dump File Description
The input file can be an output of dcmdump (default indented format
only). One element (tag, VR, value) must be written into one line
separated by arbitrary spaces or tab characters. A '#' begins a comment
that ends at the line end. Empty lines are allowed.
The individual parts of a line have the following syntax:
Tag: (gggg,eeee)
with gggg and eeee are 4 character hexadecimal values
representing group and element tag. Spaces and tabs can be
anywhere in a tag specification.
VR: Value Representation must be written as 2 characters as in
Part 6 of the DICOM standard. No spaces or tabs are allowed
between the two characters. If the VR can be determined from
the tag, this part of a line is optional.
Value: There are several rules for writing values:
1. US, SS, SL, UL, FD, FL, OD, OF and OL are written as decimal
strings that can be read by scanf().
2. AT is written as '(gggg,eeee)' with additional spaces
stripped off automatically and gggg and eeee being decimal
strings that can be read by scanf().
3. OB and OW values are written as byte or word hexadecimal
values separated by '\' character. Alternatively, OB or OW
values can be read from a separate file by writing the
filename prefixed by a '=' character (e.g. '=largepix.dat').
The contents of the file will be read as is. By default, OW
data is expected to be little endian ordered and will be
swapped if necessary. No checks will be made to ensure that
the amount of data is reasonable in terms of other attributes
such as Rows or Columns.
In case of compressed pixel data, the line should start with
'(7fe0,0010) OB (PixelSequence' in order to distinguish from
uncompressed pixel data.
4. UI is written as '=Name' in data dictionary or as unique
identifier string (see 6.), e.g. '[1.2.840.....]'.
5. Strings without () <> [] spaces, tabs and # can be written
directly.
6. Other strings must be surrounded by '[' and ']'. No bracket
structure is passed. The value ends at the last ']' in the
line. Anything after the ']' is interpreted as comment.
7. '(' and '<' are interpreted special and may not be used when
writing an input file by hand as beginning characters of a
string. Multiple Value are separated by '\'. The lines
need not be sorted into ascending tag order. References in
DICOM Directories are not supported. Semantic errors are
not detected.
Example
(0008,0020) DA [19921012] # 8, 1 StudyDate
(0008,0016) UI =MRImageStorage # 26, 1 SOPClassUID
(0002,0012) UI [1.2.276.0.7230010.100.1.1]
(0020,0032) DS [0.0\0.0] # 8, 2 ImagePositionPatient
(0028,0009) AT (3004,000c) # 4, 1 FrameIncrementPointer
(0028,0010) US 256 # 4, 1 Rows
(0002,0001) OB 01\00
Limitations
Please note that dump2dcm currently does not fully support DICOMDIR
files. Specifically, the value of the various offset data elements is
not updated automatically by this tool.
LOGGING
The level of logging output of the various command line tools and underlying libraries can be specified by the user. By default, only errors and warnings are written to the standard error stream. Using option --verbose also informational messages like processing details are reported. Option --debug can be used to get more details on the internal activity, e.g. for debugging purposes. Other logging levels can be selected using option --log-level. In --quiet mode only fatal errors are reported. In such very severe error events, the application will usually terminate. For more details on the different logging levels, see documentation of module 'oflog'. In case the logging output should be written to file (optionally with logfile rotation), to syslog (Unix) or the event log (Windows) option --log-config can be used. This configuration file also allows for directing only certain messages to a particular output stream and for filtering certain messages based on the module or application where they are generated. An example configuration file is provided in <etcdir>/logger.cfg.
COMMAND LINE
All command line tools use the following notation for parameters: square brackets enclose optional values (0-1), three trailing dots indicate that multiple values are allowed (1-n), a combination of both means 0 to n values. Command line options are distinguished from parameters by a leading '+' or '-' sign, respectively. Usually, order and position of command line options are arbitrary (i.e. they can appear anywhere). However, if options are mutually exclusive the rightmost appearance is used. This behavior conforms to the standard evaluation rules of common Unix shells. In addition, one or more command files can be specified using an '@' sign as a prefix to the filename (e.g. @command.txt). Such a command argument is replaced by the content of the corresponding text file (multiple whitespaces are treated as a single separator unless they appear between two quotation marks) prior to any further evaluation. Please note that a command file cannot contain another command file. This simple but effective approach allows one to summarize common combinations of options/parameters and avoids longish and confusing command lines (an example is provided in file <datadir>/dumppat.txt).
ENVIRONMENT
The dump2dcm utility will attempt to load DICOM data dictionaries
specified in the DCMDICTPATH environment variable. By default, i.e. if
the DCMDICTPATH environment variable is not set, the file
<datadir>/dicom.dic will be loaded unless the dictionary is built into
the application (default for Windows).
The default behavior should be preferred and the DCMDICTPATH
environment variable only used when alternative data dictionaries are
required. The DCMDICTPATH environment variable has the same format as
the Unix shell PATH variable in that a colon (':') separates entries.
On Windows systems, a semicolon (';') is used as a separator. The data
dictionary code will attempt to load each file specified in the
DCMDICTPATH environment variable. It is an error if no data dictionary
can be loaded.
SEE ALSO
dcmdump(1)
COPYRIGHT
Copyright (C) 1996-2016 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
