dc(1)
NAME
dc - an arbitrary precision calculator
SYNOPSIS
dc [-V] [--version] [-h] [--help]
[-e scriptexpression] [--expression=scriptexpression]
[-f scriptfile] [--file=scriptfile]
[file ...]
DESCRIPTION
dc is a reverse-polish desk calculator which supports unlimited precision arithmetic. It also allows you to define and call macros. Normally dc reads from the standard input; if any command arguments are given to it, they are filenames, and dc reads and executes the contents of the files before reading from standard input. All normal output is to standard output; all error output is to standard error. A reverse-polish calculator stores numbers on a stack. Entering a number pushes it on the stack. Arithmetic operations pop arguments off the stack and push the results. To enter a number in dc, type the digits (using upper case letters A through F as "digits" when working with input bases greater than ten), with an optional decimal point. Exponential notation is not supported. To enter a negative number, begin the number with ``_''. ``-'' cannot be used for this, as it is a binary operator for subtraction instead. To enter two numbers in succession, separate them with spaces or newlines. These have no meaning as commands.
OPTIONS
dc may be invoked with the following command-line options:
-V
--version
Print out the version of dc that is being run and a copyright
notice, then exit.
-h
--help Print a usage message briefly summarizing these command-line
options and the bug-reporting address, then exit.
-e script
--expression=script
Add the commands in script to the set of commands to be run
while processing the input.
-f script-file
--file=script-file
Add the commands contained in the file script-file to the set of
commands to be run while processing the input.
If any command-line parameters remain after processing the above, these
parameters are interpreted as the names of input files to be processed.
A file name of - refers to the standard input stream. The standard
input will processed if no script files or expressions are specified.
Printing Commands
p Prints the value on the top of the stack, without altering the
stack. A newline is printed after the value.
n Prints the value on the top of the stack, popping it off, and
does not print a newline after.
P Pops off the value on top of the stack. If it it a string, it
is simply printed without a trailing newline. Otherwise it is a
number, and the integer portion of its absolute value is printed
out as a "base (UCHAR_MAX+1)" byte stream. Assuming that
(UCHAR_MAX+1) is 256 (as it is on most machines with 8-bit
bytes), the sequence KSK0k1/_1Ss [ls*]Sxd0>x
[256~Ssd0<x]dsxxsx[q]Sq[Lsd0>qaPlxx] dsxxsx0sqLqsxLxLK+k could
also accomplish this function. (Much of the complexity of the
above native-dc code is due to the ~ computing the characters
backwards, and the desire to ensure that all registers wind up
back in their original states.)
f Prints the entire contents of the stack without altering
anything. This is a good command to use if you are lost or want
to figure out what the effect of some command has been.
Arithmetic
+ Pops two values off the stack, adds them, and pushes the result.
The precision of the result is determined only by the values of
the arguments, and is enough to be exact.
- Pops two values, subtracts the first one popped from the second
one popped, and pushes the result.
* Pops two values, multiplies them, and pushes the result. The
number of fraction digits in the result depends on the current
precision value and the number of fraction digits in the two
arguments.
/ Pops two values, divides the second one popped from the first
one popped, and pushes the result. The number of fraction
digits is specified by the precision value.
% Pops two values, computes the remainder of the division that the
/ command would do, and pushes that. The value computed is the
same as that computed by the sequence Sd dld/ Ld*- .
~ Pops two values, divides the second one popped from the first
one popped. The quotient is pushed first, and the remainder is
pushed next. The number of fraction digits used in the division
is specified by the precision value. (The sequence SdSn lnld/
LnLd% could also accomplish this function, with slightly
different error checking.)
^ Pops two values and exponentiates, using the first value popped
as the exponent and the second popped as the base. The fraction
part of the exponent is ignored. The precision value specifies
the number of fraction digits in the result.
| Pops three values and computes a modular exponentiation. The
first value popped is used as the reduction modulus; this value
must be a non-zero number, and should be an integer. The second
popped is used as the exponent; this value must be a non-
negative number, and any fractional part of this exponent will
be ignored. The third value popped is the base which gets
exponentiated, which should be an integer. For small integers
this is like the sequence Sm^Lm%, but, unlike ^, this command
will work with arbitrarily large exponents.
v Pops one value, computes its square root, and pushes that. The
precision value specifies the number of fraction digits in the
result.
Most arithmetic operations are affected by the ``precision value'',
which you can set with the k command. The default precision value is
zero, which means that all arithmetic except for addition and
subtraction produces integer results.
Stack Control
c Clears the stack, rendering it empty.
d Duplicates the value on the top of the stack, pushing another
copy of it. Thus, ``4d*p'' computes 4 squared and prints it.
r Reverses the order of (swaps) the top two values on the stack.
(This can also be accomplished with the sequence SaSbLaLb.)
Registers
dc provides at least 256 memory registers, each named by a single
character. You can store a number or a string in a register and
retrieve it later.
sr Pop the value off the top of the stack and store it into
register r.
lr Copy the value in register r and push it onto the stack. This
does not alter the contents of r.
Each register also contains its own stack. The current register value
is the top of the register's stack.
Sr Pop the value off the top of the (main) stack and push it onto
the stack of register r. The previous value of the register
becomes inaccessible.
Lr Pop the value off the top of register r's stack and push it onto
the main stack. The previous value in register r's stack, if
any, is now accessible via the lr command.
Parameters
dc has three parameters that control its operation: the precision, the
input radix, and the output radix. The precision specifies the number
of fraction digits to keep in the result of most arithmetic operations.
The input radix controls the interpretation of numbers typed in; all
numbers typed in use this radix. The output radix is used for printing
numbers.
The input and output radices are separate parameters; you can make them
unequal, which can be useful or confusing. The input radix must be
between 2 and 16 inclusive. The output radix must be at least 2. The
precision must be zero or greater. The precision is always measured in
decimal digits, regardless of the current input or output radix.
i Pops the value off the top of the stack and uses it to set the
input radix.
o Pops the value off the top of the stack and uses it to set the
output radix.
k Pops the value off the top of the stack and uses it to set the
precision.
I Pushes the current input radix on the stack.
O Pushes the current output radix on the stack.
K Pushes the current precision on the stack.
Strings
dc has a limited ability to operate on strings as well as on numbers;
the only things you can do with strings are print them and execute them
as macros (which means that the contents of the string are processed as
dc commands). All registers and the stack can hold strings, and dc
always knows whether any given object is a string or a number. Some
commands such as arithmetic operations demand numbers as arguments and
print errors if given strings. Other commands can accept either a
number or a string; for example, the p command can accept either and
prints the object according to its type.
[characters]
Makes a string containing characters (contained between balanced
[ and ] characters), and pushes it on the stack. For example,
[foo]P prints the characters foo (with no newline).
a The top-of-stack is popped. If it was a number, then the low-
order byte of this number is converted into a string and pushed
onto the stack. Otherwise the top-of-stack was a string, and
the first character of that string is pushed back.
x Pops a value off the stack and executes it as a macro. Normally
it should be a string; if it is a number, it is simply pushed
back onto the stack. For example, [1p]x executes the macro 1p
which pushes 1 on the stack and prints 1 on a separate line.
Macros are most often stored in registers; [1p]sa stores a macro to
print 1 into register a, and lax invokes this macro.
>r Pops two values off the stack and compares them assuming they
are numbers, executing the contents of register r as a macro if
the original top-of-stack is greater. Thus, 1 2>a will invoke
register a's contents and 2 1>a will not.
!>r Similar but invokes the macro if the original top-of-stack is
not greater than (less than or equal to) what was the second-to-
top.
<r Similar but invokes the macro if the original top-of-stack is
less.
!<r Similar but invokes the macro if the original top-of-stack is
not less than (greater than or equal to) what was the second-to-
top.
=r Similar but invokes the macro if the two numbers popped are
equal.
!=r Similar but invokes the macro if the two numbers popped are not
equal.
? Reads a line from the terminal and executes it. This command
allows a macro to request input from the user.
q exits from a macro and also from the macro which invoked it. If
called from the top level, or from a macro which was called
directly from the top level, the q command will cause dc to
exit.
Q Pops a value off the stack and uses it as a count of levels of
macro execution to be exited. Thus, 3Q exits three levels. The
Q command will never cause dc to exit.
Status Inquiry
Z Pops a value off the stack, calculates the number of digits it
has (or number of characters, if it is a string) and pushes that
number. The digit count for a number does not include any
leading zeros, even if those appear to the right of the radix
point.
X Pops a value off the stack, calculates the number of fraction
digits it has, and pushes that number. For a string, the value
pushed is 0.
z Pushes the current stack depth: the number of objects on the
stack before the execution of the z command.
Miscellaneous
! Will run the rest of the line as a system command. Note that
parsing of the !<, !=, and !> commands take precedence, so if
you want to run a command starting with <, =, or > you will need
to add a space after the !.
# Will interpret the rest of the line as a comment.
:r Will pop the top two values off of the stack. The old second-
to-top value will be stored in the array r, indexed by the old
top-of-stack value.
;r Pops the top-of-stack and uses it as an index into the array r.
The selected value is then pushed onto the stack.
Note that each stacked instance of a register has its own array
associated with it. Thus 1 0:a 0Sa 2 0:a La 0;ap will print 1, because
the 2 was stored in an instance of 0:a that was later popped.
FILES
~/.dcrc The commands in this file will be executed when dc is
first run.
BUGS
Email bug reports to bug-dc@gnu.org.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
