afmtodit(1)
NAME
afmtodit - create font files for use with groff -Tps and -Tpdf
SYNOPSIS
afmtodit [ -ckmnsvx ] [ -a n ] [ -d desc_file ] [ -e enc_file ]
[ -f internal_name ] [ -i n ] [ -o out_file ] afm_file
map_file font
The whitespace between a command line option and its argument is
optional.
DESCRIPTION
afmtodit creates a font file for use with groff, grops, and gropdf.
afmtodit is written in perl; you must have perl version 5.004 or newer
installed in order to run afmtodit.
afm_file is the AFM (Adobe Font Metric) file for the font.
map_file is a file that says which groff character names map onto each
PostScript character name; this file should contain a sequence of lines
of the form
ps_char groff_char
where ps_char is the PostScript name of the character and groff_char is
the groff name of the character (as used in the groff font file). The
same ps_char can occur multiple times in the file; each groff_char must
occur at most once. Lines starting with # and blank lines are ignored.
If the file isn't found in the current directory, it is searched in the
'devps/generate' subdirectory of the default font directory.
If a PostScript character is not mentioned in map_file, and a generic
groff glyph name can't be deduced using the Adobe Glyph List (AGL,
built into afmtodit), then afmtodit puts the PostScript character into
the groff font file as an unnamed character which can only be accessed
by the \N escape sequence in troff. In particular, this is true for
glyph variants like 'foo.bar'; all glyph names containing one or more
periods are mapped to unnamed entities. If option -e is not specified,
the encoding defined in the AFM file (i.e., entries with non-negative
character codes) is used. Please refer to section 'Using Symbols' in
the groff info file which describes how groff glyph names are
constructed.
Characters not encoded in the AFM file (i.e., entries which have -1 as
the character code) are still available in groff; they get glyph index
values greater than 255 (or greater than the biggest character code
used in the AFM file in the unlikely case that it is greater than 255)
in the groff font file. Glyph indices of unencoded characters don't
have a specific order; it is best to access them with glyph names only.
The groff font file will be output to a file called font, unless the -o
option is used.
If there is a downloadable font file for the font, it may be listed in
the file /usr/share/groff/1.22.3/font/devps/download; see grops(1).
If the -i option is used, afmtodit will automatically generate an
italic correction, a left italic correction and a subscript correction
for each character (the significance of these parameters is explained
in groff_font(5)); these parameters may be specified for individual
characters by adding to the afm_file lines of the form:
italicCorrection ps_char n
leftItalicCorrection ps_char n
subscriptCorrection ps_char n
where ps_char is the PostScript name of the character, and n is the
desired value of the corresponding parameter in thousandths of an em.
These parameters are normally needed only for italic (or oblique)
fonts.
OPTIONS
-an Use n as the slant parameter in the font file; this is used by
groff in the positioning of accents. By default afmtodit uses
the negative of the ItalicAngle specified in the afm file; with
true italic fonts it is sometimes desirable to use a slant that
is less than this. If you find that characters from an italic
font have accents placed too far to the right over them, then
use the -a option to give the font a smaller slant.
-c Include comments in the font file in order to identify the PS
font.
-ddesc_file
The device description file is desc_file rather than the default
DESC. If not found in the current directory, the 'devps
subdirectory of the default font directory is searched (this is
true for both the default device description file and a file
given with option -d).
-eenc_file
The PostScript font should be reencoded to use the encoding
described in enc_file. The format of enc_file is described in
grops(1). If not found in the current directory, the 'devps'
subdirectory of the default font directory is searched.
-fname The internal name of the groff font is set to name.
-in Generate an italic correction for each character so that the
character's width plus the character's italic correction is
equal to n thousandths of an em plus the amount by which the
right edge of the character's bounding box is to the right of
the character's origin. If this would result in a negative
italic correction, use a zero italic correction instead.
Also generate a subscript correction equal to the product of the
tangent of the slant of the font and four fifths of the x-height
of the font. If this would result in a subscript correction
greater than the italic correction, use a subscript correction
equal to the italic correction instead.
Also generate a left italic correction for each character equal
to n thousandths of an em plus the amount by which the left edge
of the character's bounding box is to the left of the
character's origin. The left italic correction may be negative
unless option -m is given.
This option is normally needed only with italic (or oblique)
fonts. The font files distributed with groff were created using
an option of -i50 for italic fonts.
-oout_file
The output file is out_file instead of font.
-k Omit any kerning data from the groff font. This should be used
only for mono-spaced fonts.
-m Prevent negative left italic correction values. Roman font
files distributed with groff were created with -i0 -m to improve
spacing with eqn(1).
-n Don't output a ligatures command for this font. Use this with
constant-width fonts.
-s The font is special. The effect of this option is to add the
special command to the font file.
-v Print version.
-x Don't use the built-in Adobe Glyph List.
FILES
/usr/share/groff/1.22.3/font/devps/DESC
Device description file.
/usr/share/groff/1.22.3/font/devps/F
Font description file for font F.
/usr/share/groff/1.22.3/font/devps/download
List of downloadable fonts.
/usr/share/groff/1.22.3/font/devps/text.enc
Encoding used for text fonts.
/usr/share/groff/1.22.3/font/devps/generate/textmap
Standard mapping.
SEE ALSO
groff(1), grops(1), groff_font(5), perl(1) The groff info file, section 'Using Symbols'.
COPYING
Copyright 1989-2014 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be included in translations approved by the Free Software Foundation instead of in the original English.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
